Pneumatic gripper clamps with fully adjustable opening angle
Toggle-joint mechanismQuick Installation Guide Handling
Handling products: J-Series.
Complete reliability of the angle adjustment over time integrated mechanism secures the adjusted position and prevents any sliding or opening angle displacement.
A retain mechanism secures the adjustment tool in its seat and prevents the Allen wrench to fall down during the adjustment procedure.
Even without air, the clamp can be toggle-locked through the adjustment means. Sealed roller bearings. No flow valve required.
Manual release button to open the linkage when air pressure is removed during setup. Pneumatic ports on both sides of the cylinder.
Operating pressure: from 2 to 8 bar / from 30 to 115 psi.