Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 118 Product description The pneumatic connections of the regulator require the aperture for supply and discharge to be on one side and the aperture for use on the opposite side. On the other two remaining sides there are apertures of G1/8” that are plugged up with removable plugs, however it is possible to connect a pressure gauge through them or use the connections as outputs. On the side where the service connection is, there is an M5 aperture where you can connect the return vacuum signal (to the pressure transducer).This option makes it possible to pick up the signal from a remote point rather than directly from the service connection. In the upper part of tregulators there are control solenoid valves, the pressure sensor and the electronics forcontrol. The part for electronically controlling the regulators is the same for all the 3 sizes. The new range of proportional regulators is supplied as standard with all the functionality initially considered only as optional; the only selections necessary in the ordering phase are thus related to the type of signal for control of voltage(T) or current (C) and the range of working pressures. CLOSED LOOP diagram (internal control circuit) The proportional regulator is known as a CLOSED LOOP regulator because a pressure transducer in the circuit transmits a continuous analog signal to the microprocessor, which compares the reference value with the detected value and supplies the control solenoid valves accordingly. Functional diagram FEEDBACK PORT Vacuum generator MICROPROCESS REFERENCE SIGNAL MICROPROCESSOR SOLENOID VALVES MANAGEMENT PRESSURE MANAGEMENT IN BALANCING CHAMBER POSITIVE PRESSURE OUTPUT TRANSDUCER CONNECTOR REGULATOR OPERATING PORT Generator of vacuum FEEDBACK PORT Series 1900 air-vacuum version Catalogue Vacuum technology Regulators Serie 1900 REGULATORS
RkJQdWJsaXNoZXIy NzYzOTY1