CAT11-EN

REGULATORS Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 122 Product description The connections of the regulator require the aperture for supply and discharge to be on one side and the aperture for use on the opposite side. On the other two remaining sides there are apertures of G1/8” that are plugged with removable plugs, however it is possible to connect a vacuum gauge or vacuum sampling for an additional remote vacuum switch. The control solenoid valves, the negative pressure sensor and the management electronics are located in the upper part of the regulator. The regulator is available in only one size, 1, with flow rate 170 l/min and the possibility to select commands: Voltage (T) Current (C). CLOSED LOOP diagram (internal control circuit) The proportional regulator is known as a CLOSED LOOP regulator because a pressure transducer in the circuit transmits a continuous analog signal to the microprocessor, which compares the reference value with the detected value and supplies the control solenoid valves accordingly. Functional diagram P MICROPROCESS REFERENCE SIGNAL MICROPROCESSOR SOLENOID VALVES MANAGEMENT NEGATIVE PRESSURE OUTPUT NEGATIVE PRESSION TRANSDUCER CONNECTOR REGULATOR OPERATING PORT PRESSURE MANAGEMENT IN BALANCING CHAMBER Series 1900 vacuum-vacuum version Vacuum technology Catalogue Regulators Series 1900