CAT16-EN

108 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PROCESS AUTOMATION TECHNOLOGY Process automation technology Catalogue Solenoid valves 1/2” NPT - Intrinsically safe Exia Series Steel line Construction characteristics Body Operators Spool Spring Screws Seals Operating range Fluid Operating temperature Note: The suitable operating temperature is limited by the most restrictive component, which is the pilot, regardless of the type of seals used in the valve spool. Maximum operating pressure Electrical (Electropilot) construction characteristics Housing Armour / Cores Springs Seals Incorporation Wire insulation Guide tube Resistance Nominal voltage Power consumption DC Connection for cable entry Electrical connection IP Rating Tolerance on voltage supply ED continuous service Electrical specifications for intrinsically safe Umax: in Imax: Wmax: in Solenoid valves 1/2” NPT series Steel line - Intrinsically safe Exia AISI 316L stainless steel AISI 316L stainless steel AISI 316L stainless steel AISI 316 stainless steel AISI 316 stainless steel (A4-70 stainless steel) NBR for low temperatures FPM (Fluoroelastomer) (available on request) Filtered air. No lubrication needed, if applied it shall be continuous. Inert Gas. Sweet gas (natural). -40°C ... +65°C 10 bar Zinc alloy with epoxy paint Ferromagnetic stainless steel Stainless steel FPM (Fluoroelastomer) PBT 30% glass load H Stainless steel 370 Ohms 24 V DC 0,4 W (Running) M20x1.5 Screw terminals 2 Poles 2.5 mm IP65 ±10% 100% 31 V DC 0,67 A 2,98 W Stainless steel solenoid valves, complete with intrinsically safe Exia rated solenoid coil in and marked have been engineered and developed to meet process automation and Oil & Gas severe service requirements, where material performances, product reliability and health and safety issues are critical elements. As a result, Pneumax products are perfectly suitable to work with sweet gas media and corrosive / aggressive gases. All external and internal parts are AISI 316L stainless steel material in compliance with NACE standard MR0175/ISO 15156-1. The range includes solenoid valves with 3 and 5 ways functions, complete with self feeding solenoids, designed according to the following configuration: solenoid-spring valve, solenoid-solenoid valve, solenoid valve with self-locking manual reset, solenoid valve with self-locking manual reset inverted. Pneumax solenoid valves have 1/2” NPT connections with 3500 Nl/min maximum flow rate. This version only provides single mounting. Certifications available: ATEX, SIL and EAC Ex: refer to products in the various sections to the catalogues. IECEx and FM: refer to Pneumatrol pilots installed upon each valve. : UL / CSA factory mutual approval II 2G Ex h IIC Gb II 2D Ex h IIIC Db : International certification for explosive atmospheres : Suitable up to SIL 3 : CU - TR 012 :

RkJQdWJsaXNoZXIy NzYzOTY1