CAT16-EN

30 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PROCESS AUTOMATION TECHNOLOGY Flow rate chart Ordering code S V 172 C E S G T O V VERSION S = Standard surface finishing F = Clean profile M = Modular assembly version C CONNECTIONS A = 1/4” NPT B = 3/8” NPT C = G1/4” S FILTER PORE SIZE A = 5 μm - 316 stainless steel B = 20 μm - 316 stainless steel C = 50 μm - 316 stainless steel D = 5 μm - HDPE E = 20 μm - HDPE F = 50 μm - HDPE G PRESSURE RANGE A = 0-2 bar B = 0-4 bar C = 0-8 bar D = 0-12 bar T TYPE = Standard* N= Without relieving O OPTIONS = Standard* L = Low temperature Z = Low temperature (-60 °C) H= High temperature S = Automatic drain SR = Reduced orifice automatic drain EF = EPDM-FDA * no additional letter required Pressure regulator Stainless steel line have been designed to withstand a 60 bar maximum inlet pressure. Maximum regulated outlet pressure is 20 bar. For performance details please refer to diagram alongside. Construction characteristics Technical characteristics - Body, adjustment mechanism, AISI 316L stainless steel and caseback intern. components - AISI 316 stainless steel adjustment springs. - Fixing screws, adjustment screws and locknut in A4 (AISI 316) stainless steel. - Filter-pressure regulator diaphragm with over-pressure drain (Relieving). - Low hysteresis rolling diaphragm. - Balanced system. - Manual or automatic condensed drain. Maximum inlet pressure (standard version) 20 bar Maximum inlet pressure (automatic drain version) 16 bar Maximum inlet pressure (reduced orifice automatic drain version) 10 bar Temperature (standard version) -30°C ... +80°C Temperature (low temperature version) -50°C ... +80°C Temperature (low temperature version -60 °C) -60°C ... +80°C Temperature (high temperature version) -5°C ... +150°C Temperature (automatic and reduced orifice drain version) -5°C ... +70°C Temperature (EPDM-FDA version) -40°C ... +100°C Note Pressure gauge connection 1/8” NPT The pressure must be always regulating while increasing. For a more precise regulation and higher sensibility, the use of a regulator with a pressure range as close as possible to the regulated pressure is recommended. Weight 1470 (gr.) Bowl capacity 15 cm 3 Assembly positions Vertical Filter regulators Process automation technology Catalogue Air service units Series 1700 Steel line - Size 2 0 1 2 3 4 5 6 7 Flow rate Q [dm³/min] (ANR) 0 1000 1500 2000 3000 3500 500 2500 Inlet pressure 10 bar - Reg. 0-8 bar 3/8” NPT - G3/8" 1/4” NPT - G1/4" Downstream pressure (bar) 20 30 40 50 60 Max. regulated pressure (bar) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Inlet pressure (bar) Reg. 0-2 bar Reg. 0-4 bar Reg. 0-8 bar Reg. 0-12 bar * = BOWL REMOVAL MAXIMUM HEIGHT ** = ONLY FOR M VERSION Ch. 17 Ch. 17 08 3 9 5.92 5 . 2 0 2 5 6 21 55 25 * 5 4 0 2 1 5 . 9 2 2 25 ** Overall manual drain version Overall automatic drain version (A.D.) 1/8” NPT Connection relieving Connections IN/OUT M5 N°2 Front holes N°2 Rear holes M4 N°4 Holes side IN N°4 Holes side OUT 1/8” NPT Pressure gauge connection 1/8” NPT Automatic drain connection G1/4” 1/4”- 3/8” NPT 25 **

RkJQdWJsaXNoZXIy NzYzOTY1