CAT16-EN

63 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PROCESS AUTOMATION TECHNOLOGY Stainless steel solenoid valves, complete with IP66 rated solenoid coil in a stainless steel housing and marked have been engineered and developed to meet process automation and Oil & Gas severe service requirements, where material performances, product reliability and health and safety issues are critical elements. As a result, Pneumax products are perfectly suitable to work with sweet gas media and corrosive / aggressive gases. All external and internal parts are AISI316L stainless steel material in compliance with NACE standard MR0175/ISO 15156-1. The range includes solenoid valves with 3 and 5 ways functions, complete with self feeding solenoids, designed according to the following configuration: - Solenoid-spring valve - Solenoid-solenoid valve - Solenoid valve with self-locking manual reset - Solenoid valve with self-locking manual reset inverted. Pneumax solenoid valves have 1/4” NPT connections with 1000Nl/min maximum flow rate. Pneumax solenoid valve utmost adaptability represent one of the main features to provide customized solution and module assembly solution, since both single mounting and integrated module design are available; thanks to distinctive Pneumax valve body design. Construction characteristics Body Operators Spool Spring Screws Seals Operating range Fluid Operating temperature Note: The suitable operating temperature is limited by the most restrictive component, which is the pilot, regardless of the type of seals used in the valve spool. Maximum operating pressure Electrical (Electropilot) construction characteristics Housing Armour / Cores Springs Seals Incorporation Wire insulation Nominal voltage Power consumption DC Power consumption AC Connection for cable entry Electrical connection IP Rating Tolerance on voltage supply ED continuous service Certifications available: Non ATEX marked product : Suitable up to SIL 3 Solenoid valves 1/4” NPT series Steel line - For safe area with IP66 stainless steel housing AISI 316L stainless steel AISI 316L stainless steel AISI 316L stainless steel AISI 316 stainless steel AISI 316 stainless steel (A4-70 stainless steel) NBR for low temperatures FPM (Fluoroelastomer) ( available on request ) Filtered air. No lubrication needed, if applied it shall be continuous. Inert Gas. Sweet gas (natural). -20°C ... +70°C 10 bar 304 stainless steel with epoxy paint Ferromagnetic stainless steel Stainless steel FPM (Fluoroelastomer) PTB 30% glass load H 24 V DC 24, 110, 220 V AC 2,4W 10VA (Inrush), 5VA (Running) M20x1.5 (1/2” NPT available on request ) Screw terminals 2 Poles 2.5 mm IP66 ±10% 100% S.V. 1/4” NPT - For safe area with IP66 stainless steel housing Series Steel line Process automation technology Catalogue

RkJQdWJsaXNoZXIy NzYzOTY1