68 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PROCESS AUTOMATION TECHNOLOGY Process automation technology Catalogue Solenoid valves 1/4" NPT Series Steel line Construction characteristics Body Operators Spool Spring Screws Seals Operating range Fluid Operating temperature Note: The suitable operating temperature is limited by the most restrictive component, which is the pilot, regardless of the type of seals used in the valve spool. Maximum operating pressure Electrical (Electropilot) construction characteristics Cores Guide tube Springs Seals Incorporation Wire insulation Nominal voltage Power consumption DC Power consumption AC Electrical connection IP Rating Tolerance on voltage supply ED continuous service Solenoid valves 1/4” NPT series Steel line AISI 316L stainless steel AISI 316L stainless steel AISI 316L stainless steel AISI 316 stainless steel AISI 316 stainless steel (A4-70 stainless steel) FPM (Fluoroelastomer) NBR for low temperatures (available on request) Filtered air. No lubrication needed, if applied it shall be continuous. Inert Gas. Sweet gas (natural). -10°C ... +130°C 10 bar Ferromagnetic stainless steel Stainless steel Stainless steel FPM (Fluoroelastomer) NBR (available on request) PA reiforced fibreglass F (Class H available on request) 24 V DC 24, 110, 220/230 V AC 10W 15VA According to DIN43650 A IP65 ±10% 100% Certifications available: Non ATEX marked product : Suitable up to SIL 3 Stainless steel solenoid valves, complete with 30mm solenoid coil and marked have been engineered and developed to meet process automation and Oil & Gas severe service requirements, where material performances, product reliability and health and safety issues are critical elements. As a result, Pneumax products are perfectly suitable to work with sweet gas media and corrosive / aggressive gases. All external and internal parts are AISI 316L stainless steel material in compliance with NACE standard MR0175/ISO 15156-1. The range includes solenoid valves with 3 and 5 ways functions, complete with self feeding solenoids, designed according to the following configuration: solenoid-spring valve, solenoid-solenoid valve. Pneumax solenoid valves have 1/4” NPT connections with 1000Nl/min maximum flowrate. Pneumax solenoid valve utmost adaptability represent one of the main features to provide customized solution and module assembly solution, since both single mounting and integrated module design are available; thanks to distinctive Pneumax valve body design.
RkJQdWJsaXNoZXIy NzYzOTY1