86 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PROCESS AUTOMATION TECHNOLOGY Process automation technology Catalogue S.V. 1/4” NPT - Intrinsically safe Exia with IP66 steel housing Series Steel line Construction characteristics Body Operators Spool Spring Screws Seals Operating range Fluid Operating temperature Note: The suitable operating temperature is limited by the most restrictive component, which is the pilot, regardless of the type of seals used in the valve spool. Maximum operating pressure Electrical (Electropilot) construction characteristics Housing Armour / Cores Springs Seals Incorporation Wire insulation Guide tube Resistance Nominal voltage Power consumption DC Connection for cable entry Electrical connection IP Rating Tolerance on voltage supply ED continuous service Electrical specifications for intrinsically safe Umax: in Imax: Wmax: in Certifications available: Solenoid valves 1/4” NPT series Steel line - Intrinsically safe Exia with IP66 steel housing AISI 316L stainless steel AISI 316L stainless steel AISI 316L stainless steel AISI 316 stainless steel AISI 316 stainless steel (A4-70 stainless steel) NBR for low temperatures FPM (Fluoroelastomer) (available on request) Filtered air. No lubrication needed, if applied it shall be continuous. Inert Gas. Sweet gas (natural). -40°C ... +65°C 10 bar 304 stainless steel with epoxy paint Ferromagnetic stainless steel Stainless steel FPM (Fluoroelastomer) PBT 30% glass load H Stainless steel 370 Ohms 24 V DC 0,4 W (Running) M20x1.5 Screw terminals 2 Poles 2.5 mm IP66 ±10% 100% 31 V DC 0,67 A 2,98 W Stainless steel solenoid valves, complete with intrinsically safe Exia rated solenoid coil in and marked have been engineered and developed to meet process automation and Oil & Gas severe service requirements, where material performances, product reliability and health and safety issues are critical elements. As a result, Pneumax products are perfectly suitable to work with sweet gas media and corrosive / aggressive gases. All external and internal parts are AISI 316L stainless steel material in compliance with NACE standard MR0175/ISO 15156-1. The range includes solenoid valves with 3 and 5 ways functions, complete with self feeding solenoids, designed according to the following configuration: solenoid-spring valve, solenoid-solenoid valve, solenoid valve with self-locking manual reset, solenoid valve with self-locking manual reset inverted. Pneumax solenoid valves have 1/4” NPT connections with 1000Nl/min maximum flow rate. Pneumax solenoid valve utmost adaptability represent one of the main features to provide customized solution and module assembly solution, since both single mounting and integrated module design are available; thanks to distinctive Pneumax valve body design. II 2G Ex h IIC T6...T4 Gb X II 2D Ex h IIIB T135°C Db X
RkJQdWJsaXNoZXIy NzYzOTY1