Technical information are provided for informative purpose only and can be subject to change without prior notice 11 Stepless opening angle adjustment Easily accessible and simple field adjustment from the rear or front side of the device, with an Allen wrench or a screw gun. A built-in, single-touch opening adjustment, with external access through a recessed detent: no disassembly is ever required. Reliable opening adjustment The opening position is repeatable thanks to an antirotation device integrated in the piston. The arm selection remains secure. A retain mechanism secures the adjustment tool in its seat and prevents the Allen wrench to fall down during the adjustment procedure. Electronic sensor One only sensor is used for all products, all sizes and series. EMC compliance to EN 60947-5-2:2007+A1:2012. Swivel connector 0°-90° Patented Efficient cushioning system • Shorter cycle time • Longer lifetime • Less noise • Less abrupt movements no slamming - no shocks • Less impact forces generated by dynamic stress factor Optimal clamping arm-shaft connection and arm structure Robust & versatile hand lever Dual shaft output Sturdy & durable solution with extremely compact and flat dimensions. The integrated manual operation guarantees that the toggle joint is engaged and requires a very low force to reach the irreversible condition. Supply-ports on both sides of the cylinder for a simpler set-up. Automotive Catalogue Clamping Series CLAMPING
RkJQdWJsaXNoZXIy NzYzOTY1