AUTOMOTIVE PNEUMATIC DEVICES CATALOGUE
www.pneumaxspa.com
Technical information are provided for informative purpose only and can be subject to change without prior notice 1 Innovation begins with Research and Development and extends to industrial processes and business activities, with the ultimate aim of total customer satisfaction. Automotive Catalogue The ultimate clamping technology Automotive Catalogue
Technical information are provided for informative purpose only and can be subject to change without prior notice 2 Automotive Catalogue PNEUMAX AUTOMOTIVE Pneumax Automotive is a business unit of Pneumax Spa. The italian company was founded in 1976 and today is at the head of Pneumax Group, one of the main players in the industrial and process automation industry wordwide. The Pneumax Automotive BU offers a complete range of products dedicated to the production lines of the industry, with a special focus on Body in White applications. The Pneumax range includes clamping units, pin packages, gripper units, power pivots and complete multi axes positioning systems developed to guarantee maximum reliability and the highest accuracy and repeatability. Each product series integrates extremely innovative technical solutions, without compromising on compliance with the various international mounting standards. Special attention was placed in energy efficiency, with devices that allow the highest savings offered on the market. Pneumax’s extensive network across the globe allows optimal and coordinated management of projects with automotive companies internationally. Every stage of production and product testing is carried out in our specially equipped departments in in the italian headquarters located in Lurano (BG) to ensure maximum reliability and the highest quality standards. Pneumax Group Headquarters Companies Distributors Headquarters PNEUMAX Safety & green Automation • Operator and equipment safety • Flexibility and reduction of setup times • Connectivity • Energy savings • Standardisation INDUSTRIAL AUTOMATION PROCESS AUTOMATION AUTOMOTIVE 850 Collaborators 26 Companies 10 Production units
Technical information are provided for informative purpose only and can be subject to change without prior notice 3 Automotive Catalogue In order to face the current challenges in BIW production lines, Pneumax’s product range is constantly evolving, with a specific focus on sustainability, flexibility of the control systems and energy efficiency. Today, in addition to the consolidated range of pneumatic solutions, Pneumax further expands its offer by introducing E-Range, a new line of electrical devices. Thanks to the experience gained in the industrial automation sector and a constant commitment to innovation, the company establishes itself as a reference point not only in pneumatics, but also in electrical integration, offering advanced and highperformance solutions to meet the needs of a constantly evolving market. A WIDE RANGE OF SOLUTIONS CONCEPT PILOT SERIES RELEASE AND PRODUCT AUDIT PROTOTYPING ELECTRONICS INTEGRATION EVALUATION AND INSPECTION FMEA ENGINEERING PRODUCT INDUSTRIALIZATION AUTOMOTIVE INNOVATION CHAIN 1 2 3 7 4 5 6 8
Technical information are provided for informative purpose only and can be subject to change without prior notice 4 Our clamping series features the widest range in clamping moment & stepless adjustable opening in the industry. Extensive Product Range covering Clamping, Locating, Handling, Pivoting functions, with all options required in the BIW production lines. Product range Automotive series Automotive Catalogue Clamping C1P32 C5D32 C1P40 C1P45 C1P63 C1P80 C1P25 C1D25 C1P50 CL25 CB40 CB63 HC1 Special Clamping products: Sealed > Product Series+S Example: C1S...,C2S...HE1S...,HE2S... C1D40 C1D50 C1D80 C1M50 C1M63 C5M32 C1D63 C2P63 NAAMS C2P40 NAAMS C2P50 NAAMS C4P50 C3P63 C3P50 C3P40 C2P80 NAAMS C2D63 NAAMS C2D40 NAAMS C2D80 NAAMS C4P63 C2D50 NAAMS HE1P6 HE1P5 HE2P3 NAAMS HE1P1 HE1P2 HE1P3 HE1P0 HE1P4 HE4P1 NAAMS HE4P2 NAAMS C1X63 CS/HES CN ADWI14 ADWI18 C2X63 NAAMS C2X50 NAAMS HE4P3 NAAMS C1X50 C1X40 HE2P2 NAAMS HE2P1 NAAMS
Technical information are provided for informative purpose only and can be subject to change without prior notice 5 Automotive Catalogue RP50 FP40 RP63 FP63 RA32 FD63 RP32 HP50 RM50 RC50 CNOMO Locating JD40 JP40 Handling Z80 Z100 Z125 Actuation Fittings ISO 15592 cylinders Compact guided cylinders Special design product Tubes Complementary products Accessories P80 PM80 P63 P125 PM125 P100 PM100 Pivoting Auto-retaining devices Sensor cables Sensors Shims Spacers CNOMO RC63 RD50 RTD40 RT40 RCD CNOMO FT32 FTD32 FT50 FTD50
6 Technical information are provided for informative purpose only and can be subject to change without prior notice Automotive Catalogue
7 Technical information are provided for informative purpose only and can be subject to change without prior notice CLAMPING.......................................................................................................................................................................08 C1-Series – International mount................................................................... 10 C2-Series – NAAMS Standard....................................................................... 38 C3 and C4-Series – New integrated hold open device............................. 51 HE1-Series – International mount. ............................................................... 58 HE2-Series – NAAMS Standard.................................................................... 70 HE4-Series – NAAMS Standard.................................................................... 80 CX-Series – International and NAAMS mount. ........................................... 91 CS/HES-Series – Sealed clamps International and NAAMS mount........ 97 CN-Series – Sealed clamps with nickel-plated linkage. ........................... 98 CB-Series – Double arm clamps. ................................................................. 99 CL-Series – Pneumatic clamp..................................................................... 105 HC-Series – Hydraulic clamps.................................................................... 108 LOCATING......................................................................................................................................................................113 R-Series.......................................................................................................... 116 RT-Series........................................................................................................ 136 RC-Series....................................................................................................... 142 HP-Series. ...................................................................................................... 148 F-Series. ......................................................................................................... 152 FT-Series. ....................................................................................................... 158 HANDLING.....................................................................................................................................................................168 J-Series. ......................................................................................................... 170 PIVOTING.......................................................................................................................................................................174 P-Series. ......................................................................................................... 177 PM-Series....................................................................................................... 186 ACTUATION...................................................................................................................................................................194 Z-Series. ......................................................................................................... 195 1390-Series – ISO 15552 cylinders with rodscrapers............................. 208 6110-Series – Compact guided cylinders................................................. 210 Special design products.............................................................................. 213 COMPLEMENTARY PRODUCTS. ...............................................................................................................................214 Tubes. ............................................................................................................. 215 Fittings............................................................................................................ 216 ACCESSORIES..............................................................................................................................................................240 Sensor. ........................................................................................................... 241 Cable............................................................................................................... 243 AR-Series. ...................................................................................................... 244 Auto-retaining devices................................................................................. 251 Shims and Spacers....................................................................................... 252 ATEX................................................................................................................................................................................254 COMPONENTS FOR THE AUTOMOTIVE INDUSTRY..............................................................................................258 Index Automotive series Automotive Catalogue
Technical information are provided for informative purpose only and can be subject to change without prior notice 8 The lightest and most compact The lightest and most compact An internal hard stop and a rigid linkage secure a precise and backlash-free positioning thus enhancing the repeatability of the closed position. The toggle mechanism is fully encapsulated within the lightweight aluminum body construction. Superior needle roller bearings with joints for high load capacity and protection. Protection against any contamination of weld spatter, welding debris and coolants enabling clamps to operate continuously in extreme environments. Clamping Stepless adjustment of the opening angle with the quickest set-up time in the market. Patented AR system to maintain the load in the open position without air supply. Maximum structural resistance and fatigue strength. 3 MLN CYCLES Automotive Catalogue Clamping Series CLAMPING
Technical information are provided for informative purpose only and can be subject to change without prior notice 9 Stepless opening angle adjustment Easily accessible and simple field adjustment from the rear or front side of the device, with an Allen wrench or a screw gun. A built-in, single-touch opening adjustment, with external access through a recessed detent: no disassembly is ever required. Reliable opening adjustment The opening position is repeatable thanks to an antirotation device integrated in the piston. The arm selection remains secure. A retain mechanism secures the adjustment tool in its seat and prevents the Allen wrench to fall down during the adjustment procedure. Electronic sensor One only sensor is used for all products, all sizes and series. EMC compliance to EN 60947-5-2:2007+A1:2012. Swivel connector 0°-90° Patented Efficient cushioning system • Shorter cycle time • Longer lifetime • Less noise • Less abrupt movements no slamming - no shocks • Less impact forces generated by dynamic stress factor Optimal clamping arm-shaft connection and arm structure Robust & versatile hand lever Dual shaft output Sturdy & durable solution with extremely compact and flat dimensions. The integrated manual operation guarantees that the toggle joint is engaged and requires a very low force to reach the irreversible condition. Supply-ports on both sides of the cylinder for a simpler set-up. Automotive Catalogue Clamping Series CLAMPING
Technical information are provided for informative purpose only and can be subject to change without prior notice 10 CLAMPING C1-Series Pneumax clamps’ series have all been developed with a modern and compact design which goes towards enhancing the operational performances, such as the cycle time, combined with a very limited total weight without compromising their strength and resistance. Thanks to the material chosen for the housings and the clamping arms, a high quality aluminum alloy, as well as due to the compact design of the cylinder and the housings, to minimize any interfering contours, Pneumax devices are the lightest and most compact power clamps in the market. Pneumatic and manual power clamps International mount Technical features Manual release button to open the linkage when air pressure is removed during setup. Pneumatic ports on both sides of the cylinder. Operating features Operating pressure from 2 to 8 bar / from 30 to 115 psi Lubrication all the devices are lubricated for life at the factory. Inline air lubrication isn’t required Functional charts • Air consumption Air consumption for complete cycle (opening and closing) REV. 00 - 17/06/2015 • Clamping moment (at 5 bar / 72.5 psi) 50 N m / 36,87 lb·ft The above data are meant for correct working conditions of the clamp with the same performance level during its life time. For applications which exceed the above data, please contact our sales representatives. • Holding moment 75 N m / 55,31 lb·ft • Cycle time for max opening angle < 0.8 s • Tooling weight chart 5 bar operating pressure – 135° opening angle REV. 00 - 18/11/2016 0 0 5 10 15 30 Air consumption (Nl) Opening angle (°) 45 60 75 90 105 120 135 0.1 0.2 0.3 0.4 0.5 0.6 0 50 100 150 200 Load (kg) Distance from center of gravity to pivot point (mm) 75 125 175 0.3 0.7 1.0 0.1 0.4 0.2 0.5 0.9 0.6 0.8 Air consumption (Nl) at 2 bar / 30 psi Air consumption (Nl) at 5 bar / 72.5 psi Air consumption (Nl) at 8 bar / 115 psi Size 25 mm 0.8 s 1.4 s NO FLOW VALVE REQUIRED Automotive Catalogue Clamping C1-Series
Technical information are provided for informative purpose only and can be subject to change without prior notice 11 • Air consumption Air consumption for complete cycle (opening and closing) REV. 00 - 17/06/2015 • Clamping moment (at 5 bar / 72.5 psi) 75 N m / 55,31 lb·ft The above data are meant for correct working conditions of the clamp with the same performance level during its life time. For applications which exceed the above data, please contact our sales representatives. • Holding moment 250 N m / 184,39 lb·ft • Cycle time for max opening angle < 0.8 s • Tooling weight chart 5 bar operating pressure – 135° opening angle REV. 00 - 18/11/2016 0 0 5 10 15 30 Air consumption (Nl) Opening angle (°) 45 60 75 90 105 120 135 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 50 100 150 200 Load (kg) Distance from center of gravity to pivot point (mm) 75 125 175 0.6 1.4 2.4 2.2 2.0 0.2 0.8 0.4 1.0 1.8 1.2 1.6 Air consumption (Nl) at 2 bar / 30 psi Air consumption (Nl) at 5 bar / 72.5 psi Air consumption (Nl) at 8 bar / 115 psi Size 32 mm 0.8 s 1.4 s NO FLOW VALVE REQUIRED • Air consumption Air consumption for complete cycle (opening and closing) REV. 00 - 17/06/2015 • Clamping moment (at 5 bar / 72.5 psi) 130 N m / 95,88 lb·ft The above data are meant for correct working conditions of the clamp with the same performance level during its life time. For applications which exceed the above data, please contact our sales representatives. • Holding moment 380 N m / 280,27 lb·ft • Tooling weight chart 5 bar operating pressure – 135° opening angle REV. 00 - 17/06/2015 0 0 5 10 15 30 Air consumption (Nl) Opening angle (°) 45 60 75 90 105 120 135 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 70 90 110 130 150 Load (kg) Distance from center of gravity to pivot point (mm) 170 190 210 1 2 3 4 5 Air consumption (Nl) at 2 bar / 30 psi Air consumption (Nl) at 5 bar / 72.5 psi Air consumption (Nl) at 8 bar / 115 psi Size 40 mm 0.8 s 1.7 s NO FLOW VALVE REQUIRED CLAMPING Automotive Catalogue Clamping C1-Series
Technical information are provided for informative purpose only and can be subject to change without prior notice 12 CLAMPING C1-Series / Functional charts (continued) • Air consumption Air consumption for complete cycle (opening and closing) REV. 00 - 16/06/2015 • Clamping moment (at 5 bar / 72.5 psi) 130 N m/ 95,88 lb·ft The above data are meant for correct working conditions of the clamp with the same performance level during its life time. For applications which exceed the above data, please contact our sales representatives. • Holding moment 380 N m/ 280,25 lb·ft • Tooling weight chart 5 bar operating pressure – 135° opening angle REV. 00 - 16/06/2015 0 0 5 10 15 30 Air consumption (Nl) Opening angle (°) 45 60 75 90 105 120 135 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 70 90 110 130 150 Load (kg) Distance from center of gravity to pivot point (mm) 170 190 210 1 2 3 4 5 Air consumption (Nl) at 2 bar / 30 psi Air consumption (Nl) at 5 bar / 72.5 psi Air consumption (Nl) at 8 bar / 115 psi Series 45 - size 40 interchangeable to size 50 and 63 mm 0.8 s 1.7 s NO FLOW VALVE REQUIRED • Air consumption Air consumption for complete cycle (opening and closing) REV. 00 - 16/06/2015 • Clamping moment (at 5 bar / 72.5 psi) 185 N m / 136,44 lb·ft The above data are meant for correct working conditions of the clamp with the same performance level during its life time. For applications which exceed the above data, please contact our sales representatives. • Holding moment 800 N m / 590,04 lb·ft • Tooling weight chart 5 bar operating pressure – 135° opening angle REV. 00 - 16/06/2015 0 0 5 10 15 30 Air consumption (Nl) Opening angle (°) 45 60 75 90 105 120 135 0.5 1.0 1.5 2.0 2.5 3.0 0 70 90 110 130 150 Load (kg) Distance from center of gravity to pivot point (mm) 170 190 210 230 250 1 2 3 4 5 6 7 8 9 10 11 Air consumption (Nl) at 2 bar / 30 psi Air consumption (Nl) at 5 bar / 72.5 psi Air consumption (Nl) at 8 bar / 115 psi Size 50 mm 0.8 s 1.7 s NO FLOW VALVE REQUIRED Automotive Catalogue Clamping C1-Series
Technical information are provided for informative purpose only and can be subject to change without prior notice 13 • Air consumption Air consumption for complete cycle (opening and closing) REV. 00 - 17/06/2015 • Clamping moment (at 5 bar / 72.5 psi) 390 N m / 287,64 lb·ft The above data are meant for correct working conditions of the clamp with the same performance level during its life time. For applications which exceed the above data, please contact our sales representatives. • Holding moment 1.500 N m / 1.106,34 lb·ft • Tooling weight chart 5 bar operating pressure – 135° opening angle REV. 00 - 17/06/2015 0 0 5 10 15 30 Air consumption (Nl) Opening angle (°) 45 60 75 90 105 120 135 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5 4.5 0 70 90 110 130 150 Load (kg) Distance from center of gravity to pivot point (mm) 170 190 210 230 250 270 290 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Air consumption (Nl) at 2 bar / 30 psi Air consumption (Nl) at 5 bar / 72.5 psi Air consumption (Nl) at 8 bar / 115 psi Size 63 mm 0.8 s 1.7 s NO FLOW VALVE REQUIRED • Air consumption Air consumption for complete cycle (opening and closing) REV. 00 - 29/05/2015 • Clamping moment (at 5 bar / 72.5 psi) 850 N m / 626,92 lb·ft The above data are meant for correct working conditions of the clamp with the same performance level during its life time. For applications which exceed the above data, please contact our sales representatives. • Holding moment 2.500 N m / 1.843,90 lb·ft • Tooling weight chart 5 bar operating pressure – 135° opening angle REV. 00 - 29/05/2016 0 0 5 10 15 30 Air consumption (Nl) Opening angle (°) 45 60 75 90 105 120 135 1 2 3 4 5 6 7 8 9 10 11 12 0 50 100 150 Load (kg) Distance from center of gravity to pivot point (mm) 200 250 300 350 400 2 4 6 8 10 12 14 16 18 20 22 24 Air consumption (Nl) at 2 bar / 30 psi Air consumption (Nl) at 5 bar / 72.5 psi Air consumption (Nl) at 8 bar / 115 psi Size 80 mm 1.2 s 1.8 s NO FLOW VALVE REQUIRED CLAMPING Automotive Catalogue Clamping C1-Series
Technical information are provided for informative purpose only and can be subject to change without prior notice 14 CLAMPING C1-Series / Ordering string C 1 E P G 25 1 A 01 C 1 P 25 E G 1 A 01 Nano Power Clamps VERSION MOUNTING PATTERN OPERATION SIZE SENSOR CLAMP ARM TYPE ARM MOUNT PORTS ARM MATERIAL P = pneumatic D2 = pneumatic with manual operation (size 32 mm please see C5 Series) D0 = o utput shaft for manual operation - no lever and no handle included (size 32 mm please see C5 Series) 25 = Ø 25 mm 32 = Ø 32 mm E = electronic sensor with M12 swivel connector - PNP A = electronic sensor with M12 swivel connector - NPN N = no sensor B = electronic sensor with M8 swivel connector - PNP 01 = wishbone, central, 0 mm offset 04 = wishbone, central, 10 mm offset 13 = H, 0 mm offset 14 = H, 10 mm offset G = G thread – BSPP N = NPT (only pneumatic clamp) A = aluminum 1 = international mount C = clamp 1 = 3 = 4 = 2 = 1 C 5 E D2 4 32 A 01 C 5 D2 32 E 4 1 A 01 C5-Series VERSION MOUNTING PATTERN OPERATION SIZE SENSOR CLAMP ARM TYPE ARM MOUNT FIXED OPENING ANGLE ARM MATERIAL M2 = manual Ø 32 D2 = pneumatic with manual operation 32 = size 32 mm E = electronic sensor with M12 swivel connector - PNP A = electronic sensor with M12 swivel connector - NPN N = no sensor B = electronic sensor with M8 swivel connector - PNP 01 = wishbone, central, 0 mm offset 04 = wishbone, central, 10 mm offset 13 = H, 0 mm offset 14 = H, 10 mm offset 1 = 135° 2 = 120° 6 = 55° 7 = 20° A = aluminum 5 = heavy duty style C = clamp 1 = 3 = 4 = 2 = Automotive Catalogue Clamping C1-Series
Technical information are provided for informative purpose only and can be subject to change without prior notice 15 CLAMPING C 1 E P G 45 1 A 54 C 1 P 45 E G 1 A 54 C1P45-Series VERSION MOUNTING PATTERN OPERATION SIZE SENSOR CLAMP ARM TYPE ARM MOUNT PORTS ARM MATERIAL P = pneumatic 45 = Ø 40 mm Mounting pattern interchangeable to 50 and 63 mm bore clamps E = electronic sensor with M12 swivel connector - PNP A = electronic sensor with M12 swivel connector - NPN N = no sensor B = electronic sensor with M8 swivel connector - PNP 54 = wishbone, central, 45 mm offset 55 = wishbone, right, 45 mm offset 56 = wishbone, left, 45 mm offset G = G thread – BSPP A = aluminum 1 = International mount C = clamp 1 = 2 = Please see the charts in the datasheets for arm position as well as for max. opening angle C 1 E P G 40 4 A 01 C 1 P 40 E G 4 A 01 C1-Series VERSION MOUNTING PATTERN OPERATION SIZE SENSOR CLAMP ARM TYPE ARM MOUNT PORTS ARM MATERIAL P = pneumatic D_ = pneumatic with manual operation D0 = o utput shaft for manual operation - no lever and no handle included 40 = Ø 40 mm 50 = Ø 50 mm G = G thread – BSPP N = NPT E = electronic sensor with M12 swivel connector - PNP A = electronic sensor with M12 swivel connector - NPN N = no sensor B = electronic sensor with M8 swivel connector - PNP 01 = wishbone, central, 15 mm offset* 02 = wishbone, right, 15 mm offset* 03 = wishbone, left, 15 mm offset* 04 = wishbone, central, 45 mm offset 05 = wishbone, right, 45 mm offset 06 = wishbone, left, 45 mm offset A = aluminum S = steel 1 = International mount C = clamp 1 = 3 = 4 = 2 = * for size 80 mm = 20 mm offset 63 = Ø 63 mm 80 = Ø 80 mm 4 = Automotive Catalogue Clamping C1-Series
Technical information are provided for informative purpose only and can be subject to change without prior notice 16 CLAMPING Automotive Catalogue Clamping C1-Series 1 C 1 E M2 4 50 A 1 C 1 M2 50 E 4 1 A 1 C1M-Series VERSION MOUNTING PATTERN OPERATION SIZE SENSOR CLAMP ARM TYPE ARM MOUNT FIXED OPENING ANGLE ARM MATERIAL M1= manual with straight handle M2 = manual with “D2” handle 50 = size 50 mm 63 = size 63 mm E = electronic sensor with M12 swivel connector - PNP A = electronic sensor with M12 swivel connector - NPN N = no sensor B = electronic sensor with M8 swivel connector - PNP 01 = wishbone, central, 15 mm offset 04 = wishbone, central, 45 mm offset For the other arm types, see ordering string of C1 series A = aluminum 1 = international mount C = clamp 1 = 3 = 4 = 2 = 1 = 135° 2 = 120° 3 = 90° 4 = 60° 6 = 55° 5 = 45° 7 = 20° 8 = 105° 9 = 30° 10 = 75°
Technical information are provided for informative purpose only and can be subject to change without prior notice 17 60 17±0.05 28 +0.1 -0 4 4 44±0.1 4 4.5 18.5 29.2 47 34.5 8.3 130 14±0.05 18* 210 MAX 34 2 34 53 M12x1 29.4 40 M5 - 8 DEEP G1/8" G1/8" 5±0.1 □12 3 53 19 26 45 46 33.5±0.05 6 H7 Ø6 - 7 DEEP M5 - 8 DEEP 4.5 26.5±0.05 20* 78 67 30* 25* Ø5 H7 - 8 DEEP * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 03 - 27/10/2021 C1P25E / Nano Power clamp - International mount - 25 mm bore C1D225E / Nano Power clamp - International mount - 25 mm bore with manual operation WEIGHT 0.987 kg D2 handle included WEIGHT 0.75 kg * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 01 - 30/03/2021 5±0.05 18* Ø5 H7-6 DEEP M5 - 8 DEEP 26.5±0.05 44±0.1 17±0.05 33.5±0.05 5±0.1 14±0.05 M5 - 8 DEEP 12 40 29.4 18.5 29.1 4.5 4 60 4 4 2 40 20* 26 19 3 6 H7 46 53 G1/8" G1/8" M5 - 8 DEEP 35 130 210 MAX 8.3 34.5 18* 25* 72 78 45 34.5 53 25 M12x1 30* Ø6 -7 DEEP Ø5 - 8 DEEP 20* 25 54.4 108.4 3.77° A 28+0.1 -0 CLAMPING Automotive Catalogue Clamping C1-Series Handle swivel angle Arm opening angle A Handle swivel angle 0° -3,77° 15° 19° 30° 35° 45° 53° 60° 74° 75° 94° 90° 109,5° 105° 120° 120° 126° 135° 130° Max Hand Force: 200 N
Technical information are provided for informative purpose only and can be subject to change without prior notice 18 CLAMPING Automotive Catalogue Clamping C1-Series Clamping arms / 12 mm shaft for clamps’ size 25 mm and size 32 mm mm - Left & right clamping surfaces REV. 00 - 12/04/2017 20±0.1 □12 105 36 Ø7 Ø6 H7 53 12 20±0.02 20±0.2 69 60 79±0.1 47.1±0.1 59.1 20±0.1 □12 105 59.1 12 Ø6 H7 Ø7 53 36 47.1±0.1 20±0.02 20±0.2 79±0.1 60 69 10±0.1 12 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1213 Aluminum H 0.163 135° 115° N/A 45° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft 12 mm shaft – 10 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1214 Aluminum H 0.173 135° 115° N/A 45° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft Clamping arms / 12 mm shaft for clamps’ size 25 mm REV. 02 - 07/10/2015 53 12 36 57 48 65±0.1 20±0.02 20±0.2 □12 20±0.1 93 Ø4 H7 Ø6.5 10±0.1 65±0.1 20±0.02 12 36 20±0.1 93 □12 53 20±0.2 48 57 Ø4 H7 Ø6.5 12 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B12012 Aluminum Central 0.127 135° 105° 135° 90° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft 12 mm shaft – 10 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B12042 Aluminum Central 0.135 135° 120° N/A 45° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft
Technical information are provided for informative purpose only and can be subject to change without prior notice 19 CLAMPING Automotive Catalogue Clamping C1-Series Clamping arms / 12 mm shaft for clamps’ size 32 mm REV. 00 - 11/02/2022 Clamping arms / 12 mm shaft for clamps’ size 25 mm REV. 00 - 11/02/2022 12 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B12022 Aluminum Right 0.127 135° 105° 135° 90° B12032 Aluminum Left 0.127 135° 105° 135° 90° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft 12 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B12023 Aluminum Right 0.135 135° 112° 135° 90° B12033 Aluminum Left 0.135 135° 112° 135° 90° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft 20±0.02 20±0.2 □12 20±0.1 93 53 36 12 Ø4 H7 Ø6.5 48 57 65±0.1 23.55±0.15 23.55±0.15 20±0.02 20±0.2 □12 20±0.1 105 53 36 12 Ø6 H7 Ø7 60 69 79±0.1 23.55±0.15 23.55±0.15
Technical information are provided for informative purpose only and can be subject to change without prior notice 20 Automotive Catalogue Clamping C1-Series C1P32E / Nano Power clamp - International mount - 32 mm bore * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 02 - 13/09/2017 WEIGHT 0.987 kg □12 8±0.05 69 25±0.05 36 +0.1 -0 4 4 Ø6 H7 - 8 DEEP 30* 50±0.1 3 3 20* 42±0.05 18.5 29.1 47 34.5 7 152.5 48±0.05 8±0.1 8 H7 18±0.05 20* 241 MAX Ø5 H7 - 8 DEEP 46 2 34.5 53 53 46 20* 25 28 M5 - 6 DEEP THREADED HOLE FOR AUTO-RETAINING DEVICE M5 - 10 DEEP M12x1 G1/8" G1/8" 42 29.4 40 M5 - 8 DEEP 9 12 12 34+0.05 -0 R2.5 R2.5 □12 8±0.05 69 25±0.05 36 +0.1 -0 4 4 Ø6 H7 - 8 DEEP 30* 50±0.1 3 3 20* 42±0.05 18.5 29.1 47 34.5 7 152.5 48±0.05 8±0.1 8 H7 18±0.05 20* 241 MAX Ø5 H7 - 8 DEEP 46 2 34.5 53 53 46 20* 25 28 M5 - 6 DEEP THREADED HOLE FOR AUTO-RETAINING DEVICE M5 - 10 DEEP M12x1 G1/8" G1/8" 42 29.4 40 M5 - 8 DEEP 9 12 □12 8±0.05 69 25±0.05 36 +0.1 -0 4 4 Ø6 H7 - 8 DEEP 30* 50±0.1 3 3 20* 42±0.05 18.5 29.1 47 34.5 7 152.5 48±0.05 8±0.1 8 H7 18±0.05 20* 241 MAX Ø5 H7 - 8 DEEP 46 2 34.5 53 53 46 20* 25 28 M5 - 6 DEEP THREADED HOLE FOR AUTO-RETAINING DEVICE M5 - 10 DEEP M12x1 G1/8" G1/8" 42 29.4 40 M5 - 8 DEEP 9 12 C5D232E / Nano Power clamp - heavy duty style - International mount - 32 mm bore with manual operation * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 06/10/2020 WEIGHT 1.36 kg D2 handle included 47 2 3 3 69 28 25 46 53 34.5 79.4 53 34.5 7 241 MAX 152.5 46 Ø5 H7 - 8 DEEP 42 G1/8" G1/8" 30* 42* Ø6 H7 - 8 DEEP 40 29.4 4 18.5 Ø12 29.1 4 20* 30* M12x1 M5 - 8 DEEP 8 H7 25* M5 - 6 DEEP AUTO-RETAINING DEVICE M5 - 10 DEEP 42±0.05 36 50 25±0.05 +0.1 -0 ±0.1 8 48±0.05 ±0.1 18±0.05 Handle swivel angle Arm opening angle A Handle swivel angle 0° 3.5° 15° 28.5° 30° 45° 45° 68° 60° 90.5° 75° 115.5° 90° 130° 105° 139° 120° 144° 135° 147° Max Hand Force: 200 N
Technical information are provided for informative purpose only and can be subject to change without prior notice 21 Automotive Catalogue Clamping C1-Series * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 06/10/2020 C5M232E / Nano Power clamp - International mount - 32 mm bore WEIGHT 1 kg D2 handle included 42* M5 - 10 DEEP 4 50±0.1 8±0.05 29.1 18.5 69 □12 36+0.1 -0 4 3 3 M12x1 29.4 40 M5 - 6 DEEP THREADED HOLE FOR AUTO-RETAINING DEVICE 20* 30* 28 25±0.05 42±0.05 25 8 H7 53 34.5 157.5 MAX 46 Ø5 H7 - 8 DEEP M5 - 8 DEEP 48±0.05 5.5±0.1 30* 18±0.05 25* 46 53 34.5 79.4 Ø6 H7 - 8 DEEP Handle swivel angle Arm opening angle A Handle swivel angle 0° 3.5° 15° 28.5° 30° 45° 45° 68° 60° 90.5° 75° 115.5° 90° 130° 105° 139° 120° 144° 135° 147° * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 28/08/2017 C1P32E__A / Nano Power clamp - International mount - 32 mm bore WEIGHT 0.98 kg R2.5 R2.5 34 +0.05 -0 12 9 12 M5 - 6 DEEP THREADED HOLE FOR AUTO-RETAINING DEVICE 40 29.4 M12x1 M5 - 10 DEEP Ø6 H7 - 8 DEEP 4 36+0.1 -0 4 □12 69 3 3 2 47 18.5 29.1 50±0.1 28 20* 30* 25 42±0.05 25±0.05 8±0.05 42 G1/8" G1/8" M5 - 8 DEEP Ø6 H7 - 8 DEEP 46 152.5 241 MAX 7 34.5 53 8 H7 18±0.05 20* 20* 8±0.1 48±0.05 34.5 53 46 R2.5 R2.5 34 +0.05 -0 12 9 12 M5 - 6 DEEP THREADED HOLE FOR AUTO-RETAINING DEVICE 40 29.4 M12x1 M5 - 10 DEEP Ø6 H7 - 8 DEEP 4 36+0.1 -0 4 □12 69 3 3 2 47 18.5 29.1 50±0.1 28 20* 30* 25 42±0.05 25±0.05 8±0.05 42 G1/8" G1/8" M5 - 8 DEEP Ø6 H7 - 8 DEEP 46 152.5 241 MAX 7 34.5 53 8 H7 18±0.05 20* 20* 8±0.1 48±0.05 34.5 53 46 Ø6 Max Hand Force: 200 N
Technical information are provided for informative purpose only and can be subject to change without prior notice 22 CLAMPING Clamping arms / 12 mm shaft for clamps’ size 32 mm REV. 00 - 07/10/2015 □12 20±0.1 10±0.1 105 36 12 53 Ø6 H7 Ø7 79±0.1 60 69 20±0.2 20±0.02 □12 20±0.1 105 Ø7 Ø6 H7 53 12 36 69 60 79±0.1 20±0.02 20±0.2 □12 20±0.1 10±0.1 105 36 12 53 Ø6 H7 Ø7 79±0.1 60 69 20±0.2 20±0.02 □12 20±0.1 105 Ø7 Ø6 H7 53 12 36 69 60 79±0.1 20±0.02 20±0.2 Clamping arms / 12 mm shaft for clamps’ size 25 mm and size 32 mm mm - Left & right clamping surfaces REV. 00 - 12/04/2017 20±0.1 □12 105 36 Ø7 Ø6 H7 53 12 20±0.02 20±0.2 69 60 79±0.1 47.1±0.1 59.1 20±0.1 □12 105 59.1 12 Ø6 H7 Ø7 53 36 47.1±0.1 20±0.02 20±0.2 79±0.1 60 69 10±0.1 12 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B12013 Aluminum Central 0.135 135° 112° 135° 90° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft 12 mm shaft – 10 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B12043 Aluminum Central 0.144 135° 123° N/A 45° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft 12 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1213 Aluminum H 0.163 135° 115° N/A 45° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft 12 mm shaft – 10 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1214 Aluminum H 0.173 135° 115° N/A 45° Screws: M5x14 Tightening torque: 5 N m / 3.68 lb ft Automotive Catalogue Clamping C1-Series
Technical information are provided for informative purpose only and can be subject to change without prior notice 23 CLAMPING Automotive Catalogue Clamping C1-Series * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 01 - 03/05/2022 C1D_40E / Power clamp - International mount - 40 mm bore with manual operation WEIGHT 1.75 kg D2 handle included Handle swivel angle Arm opening angle A Handle swivel angle 0° 4.12° 15° 22.65° 30° 38.2° 45° 58.4° 60° 83.6° 75° 107.6° 90° 123.6° 105° 132.75° 120° 137.7° 135° 140° Max Hand Force: 200 N C1P40E / Power clamp - International mount - 40 mm bore * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 31/03/2015 WEIGHT 1.45 kg □16 12±0.05 28 36 83 25±0.05 40 +0.1 -0 4.35 4 Ø6 H7 - 10 DEEP M6 - 10 DEEP 35* 60±0.1 4 3 25* 38.5±0.05 18.5 29.2 62 33 50 8 161 47±0.05 7.5±0.1 8 H7 20±0.05 25* 260 MAX M6 - 10 DEEP Ø6 H7 - 8 DEEP G1/8" 40 48 45 29.4 40 M12x1 G1/8" 2 34.5 55 35* □16 25±0.05 40 +0.1 -0 4.35 4 Ø6 H7 - 10 DEEP 10 DEEP 35* 60±0.1 4 3 25* 38.5±0.05 18.5 29.2 62 161 47±0.05 7.5±0.1 8 H7 20±0.05 25* 260 MAX M6 - 10 DEEP Ø6 H7 - 8 DEEP G1/8" 40 48 45 29.4 40 M12x1 G1/8" 2 34.5 55 35* □16 12±0.05 28 36 83 25±0.05 40 +0.1 -0 4.35 4 Ø6 H7 - 10 DEEP M6 - 10 DEEP 35* 60±0.1 4 3 25* 38.5±0.05 18.5 29.2 62 33 50 8 161 47±0.05 7.5±0.1 8 H7 20±0.05 25* 260 MAX M6 - 10 DEEP Ø6 H7 - 8 DEEP G1/8" 40 48 45 29.4 40 M12x1 G1/8" 2 34.5 55 35* D2 version D1 version 2 62 29.1 18.5 3 4 60 M6 - 10 DEEP 6 H7 - 10 DEEP 4 4.35 40 83 16 25 12 35* 38.5 25* 36 28 50 G1/8" 48 40 G1/8" 6 H7- 10 DEEP M6 - 10 DEEP 245 MAX 8 H7 161 8 33 47 20 25* 7.5 50 55 34.5 41 13 85.7 ENSIONAL TOLERANCE FOR DOWEL HOLES: 0.02 NSIONAL TOLERANCE FOR THREADED HOLES: 0.1 REV. 00 - 17/06/2015 C1D _ 40E 35* 135° MAX 36.5 81 162 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 +0.1 -0 ±0.1 M6 - 10 DEEP 6 H7 - 6 DEEP A 2 62 29.1 18.5 3 4 60 M6 - 10 DEEP 6 H7 - 10 DEEP 4 4.35 40 83 16 25 12 35* 38.5 25* 36 28 50 G1/8" 48 40 G1/8" 6 H7- 10 DEEP M6 - 10 DEEP 245 MAX 8 H7 161 8 33 47 20 25* 7.5 50 55 34.5 41 13 85.7 NSIONAL TOLERANCE FOR DOWEL HOLES: 0.02 SIONAL TOLERANCE FOR THREADED HOLES: 0.1 REV. 00 - 17/06/2015 C1D _ 40E 35* 135° MAX 36.5 81 162 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 +0.1 -0 ±0.1 M6 - 10 DEEP 6 H7 - 6 DEEP 2 62 29.1 18.5 3 4 60 M6 - 10 DEEP 6 H7 - 10 DEEP 4 4.35 40 83 16 25 12 35* 38.5 25* 36 28 50 G1/8" 48 40 G1/8" 6 H7- 10 DEEP M6 - 10 DEEP 245 MAX 8 H7 161 8 33 47 20 25* 7.5 50 55 34.5 41 13 85.7 NSIONAL TOLERANCE FOR DOWEL HOLES: 0.02 SIONAL TOLERANCE FOR THREADED HOLES: 0.1 REV. 00 - 17/06/2015 C1D _ 40E 35* 135° MAX 36.5 81 162 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 +0.1 -0 ±0.1 M6 - 10 DEEP 6 H7 - 6 DEEP
Technical information are provided for informative purpose only and can be subject to change without prior notice 24 CLAMPING Clamping arms / 16 mm shaft 16 mm shaft – 15 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1601 Aluminum Central 0.24 135° 125° N/A 45° Q1601 Steel Central 0.44 135° 125° N/A 45° B1602 Aluminum Right 0.24 135° 125° N/A 45° Q1602 Steel Right 0.46 135° 125° N/A 45° B1603 Aluminum Left 0.24 135° 125° N/A 45° Q1603 Steel Left 0.46 135° 125° N/A 45° Screws: M6x20 Tightening torque: 10 N m / 7.37 lb ft 16 mm shaft – 45 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1604 Aluminum Central 0.3 135° 135° N/A 45° Q1604 Steel Central 0.55 135° 135° N/A 45° B1605 Aluminum Right 0.3 135° 135° N/A 45° Q1605 Steel Right 0.57 135° 135° N/A 45° B1606 Aluminum Left 0.3 135° 135° N/A 45° Q1606 Steel Left 0.57 135° 135° N/A 45° Screws: M6x20 Tightening torque: 10 N m / 7.37 lb ft Automotive Catalogue Clamping C1-Series 90±0.1 16 23±0.1 70 34.5 55 □16 117 22±0.1 15±0.1 Ø6 H7 Ø7 82 20±0.2 20±0.02 55 34.5 16 Ø6 H7 Ø7 70 82 20 90 20 (7) 23 16 22 117 45 ±0.1 ±0.1 ±0.1 ±0.1 ±0.2 ±0.02 REV. 00 - 31/03/2015 55 34.5 16 Ø6 H7 Ø7 70 82 20 90 20 (7) 23 16 22 117 45 ±0.1 ±0.1 ±0.1 ±0.1 ±0.2 ±0.02
Technical information are provided for informative purpose only and can be subject to change without prior notice 25 CLAMPING 20±0.02 20±0.2 □16 22±0.1 117 55 34.5 16 Ø6 H7 Ø7 70 82 90±0.1 (7) 23±0.1 □16 22±0.1 117 25±0.1 55 34.5 16 Ø6 H7 Ø7 70 82 20±0.02 90±0.1 20±0.2 (7) 23±0.1 16 mm shaft – 25 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1621 Aluminum Central 0.25 135° 135° N/A 45° B1622 Aluminum Right 0.25 135° 135° N/A 45° B1623 Aluminum Left 0.25 135° 135° N/A 45° Screws: M6x20 Tightening torque: 10 N m / 7.37 lb ft 16 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1618 Aluminum Central 0.25 135° 105° 135° 90° B1619 Aluminum Right 0.25 135° 105° 135° 90° B1620 Aluminum Left 0.25 135° 105° 135° 90° Screws: M6x20 Tightening torque: 10 N m / 7.37 lb ft Automotive Catalogue Clamping C1-Series REV. 00 - 12/05/2017 Clamping arms / 16 mm shaft 20±0.02 20±0.2 16 22±0.1 117 55 34.5 16 Ø6 H7 70 82 90±0.1 (7) 23±0.1 □16 22±0.1 117 25±0.1 55 34.5 16 Ø6 H7 Ø7 70 82 20±0.02 90±0.1 20±0.2 (7) 23±0.1 REV. 00 - 07/11/2019 Clamping arms / 16 mm shaft - Left & right clamping surfaces Ø7 Ø6 H7 20±0.02 16 55 34.5 20±0.1 (6) 84±0.1 65 77 28.55±0.1 28.55±0.1 22±0.1 �16 110 Ø7 Ø6 H7 20±0.02 16 55 34.5 20±0.1 (6) 84±0.1 65 77 28.55±0.1 28.55±0.1 22±0.1 �16 110 16 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1613 Aluminum H 0.27 125° 45° 135° 35° MAX Screws: M6x20 Tightening torque: 10 N m / 7.37 lb ft
Technical information are provided for informative purpose only and can be subject to change without prior notice 26 Clamping arms / 16 mm shaft 16 mm shaft – 45 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1644 Aluminum Central 0.18 135° 135° N/A 45° Screws: M6x20 Tightening torque: 10 N m / 7.37 lb ft REV. 00 - 31/03/2015 55 34.5 16 Ø6 H7 Ø7 60 72 80 20 16 22 107 45 ±0.1 ±0.1 ±0.1 ±0.2 20±0.2 CLAMPING Automotive Catalogue Clamping C1-Series C1P45EG / Power clamp - 40 mm bore cylinder and mounting pattern interchangeable to 50 and 63 mm bore clamps * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 23/04/2019 WEIGHT 1.45 kg 2 M12x1 40 29.4 62 29.1 18.5 M6 - 10 DEEP Ø6 H7 - 10 DEEP 4.35 83 □16 12±0.05 35* 38.5±0.05 25* 36 28 50 G1/8" 48 40 G1/8" 268 MAX 161 8 33 50 55 34.5 45 11±0.1 32±0.1* 27±0.05 30* M8 - 10 DEEP Ø8 H7 - 12 DEEP 2 M12x1 40 29.4 62 29.1 18.5 M6 - 10 DEEP Ø6 H7 - 10 DEEP 4.35 83 □16 12±0.05 35* 38.5±0.05 25* 36 28 50 G1/8" 48 40 G1/8" 268 MAX 161 8 33 50 55 34.5 45 11±0.1 32±0.1* 27±0.05 30* M8 - 10 DEEP Ø8 H7 - 12 DEEP 55 34.5 16 Ø6 H7 Ø7 60 72 80 20 16 22 107 45 ±0.1 ±0.1 ±0.1 ±0.2 20±0.2
Technical information are provided for informative purpose only and can be subject to change without prior notice 27 CLAMPING Automotive Catalogue Clamping C1-Series Clamping arms / 16 mm shaft REV. 00 - 23/04/2019 22±0.1 □16 45±0.1 131 Ø9 Ø6 H7 20 34.5 55 (9) 30±0.2 23±0.1 30±0.02 92±0.1 79 65 16 mm shaft – 45 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1654 Aluminum Central 0.3 135° 135° N/A 45° B1655 Aluminum Right 0.3 135° 135° N/A 45° B1656 Aluminum Left 0.3 135° 135° N/A 45° Screws: M6x20 Tightening torque: 10 N m / 7.37 lb ft C1P50E / Power clamp - International mount - 50 mm bore * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 31/03/2015 WEIGHT 2.7 kg 13 10±0.05 36.5±0.05 55 +0.1 -0 10.5 Ø10 H7 - 12 DEEP M10 - 12 DEEP 6.5 78 5.5 4.5 45* 55±0.05 29.4 18.5 29 23±0.1 50* 93±0.1 45 200.5 314.5 MAX 11±0.1 27±0.05 32* 30* 12 N9 M8 - 12 DEEP Ø8 H7 - 12 DEEP G1/4" G1/4" 45 47 3.5 45 40 71.5±0.05 109 2 48 68 □19 M12x1 13 10±0.05 36.5±0.05 55 +0.1 -0 10.5 Ø10 H7 - 12 DEEP M10 - 12 DEEP 6.5 78 5.5 4.5 45* 55±0.05 29.4 18.5 29 23±0.1 50* 93±0.1 45 200.5 314.5 MAX 11±0.1 27±0.05 32* 30* 12 N9 M8 - 12 DEEP Ø8 H7 - 12 DEEP G1/4" G1/4" 45 47 3.5 45 40 71.5±0.05 109 2 48 68 □19 M12x1 13 10±0.05 36.5±0.05 55 +0.1 -0 10.5 Ø10 H7 - 12 DEEP M10 - 12 DEEP 6.5 78 5.5 4.5 45* 55±0.05 29.4 18.5 29 23±0.1 50* 93±0.1 45 200.5 314.5 MAX 11±0.1 27±0.05 32* 30* 12 N9 M8 - 12 DEEP Ø8 H7 - 12 DEEP G1/4" G1/4" 45 47 3.5 45 40 71.5±0.05 109 2 48 68 □19 M12x1
Technical information are provided for informative purpose only and can be subject to change without prior notice 28 CLAMPING Automotive Catalogue Clamping C1-Series * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 29/08/2017 C1D_50E / Power clamp - International mount - 50 mm bore with manual operation WEIGHT 3.1 kg D2 handle included Handle swivel angle Arm opening angle A Handle swivel angle 0° 3.25° 15° 27° 30° 43° 45° 59.3° 60° 75.4° 75° 89.75° 90° 101° 105° 109° 120° 114.25° 135° 117.2° M10 - 12 DEEP 1 0 H7 - 12 DEEP 2 109 40 93 29 18.5 29.4 4.5 5.5 78 6.5 10.5 55 36.5 13 55 45* 50* 23 10 3.5 47 45 G1/4" G1/4" 8 H7 - 12 DEEP M8 - 12 DEEP 12 H7 27 314.5 MAX 200.5 45 71.5 11 32* 30* 19 68 48 45 M12x1 57 5 9 91.2 36.5 *DIMENSIONAL TOLERANCE FOR DOWEL HOLES: 0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: 0.1 REV. 01 - 29/08/2017 48 C1D _ 50E 114° MAX 56.827 79.2 201 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft ±0.05 ±0.05 ±0.05 ±0.05 ±0.1 +0.1 +0.1 -0 ±0.1 A Max Hand Force: 200 N M10 - 12 DEEP 1 0 H7 - 12 DEEP 2 109 40 93 29 18.5 29.4 4.5 5.5 78 6.5 10.5 55 36.5 13 55 45* 50* 23 10 3.5 47 45 G1/4" G1/4" 8 H7 - 12 DEEP M8 - 12 DEEP 12 H7 27 314.5 MAX 200.5 45 71.5 11 32* 30* 19 68 48 45 M12x1 57 5 9 91.2 36.5 *DIMENSIONAL TOLERANCE FOR DOWEL HOLES: 0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: 0.1 REV. 01 - 29/08/2017 48 C1D _ 50E 114° MAX 56.827 79.2 201 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft ±0.05 ±0.05 ±0.05 ±0.05 ±0.1 +0.1 +0.1 -0 ±0.1 D1 version D2 version M10 - 12 DEEP 1 0 H7 - 12 DEEP 2 109 40 93 29 18.5 29.4 4.5 5.5 78 6.5 10.5 55 36.5 13 55 45* 50* 23 10 3.5 47 45 G1/4" G1/4" 8 H7 - 12 DEEP M8 - 12 DEEP 12 H7 27 314.5 MAX 200.5 45 71.5 11 32* 30* 19 68 48 45 M12x1 57 5 9 91.2 36.5 *DIMENSIONAL TOLERANCE FOR DOWEL HOLES: 0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: 0.1 REV. 01 - 29/08/2017 48 C1D _ 50E 114° MAX 56.827 79.2 201 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft ±0.05 ±0.05 ±0.05 ±0.05 ±0.1 +0.1 +0.1 -0 ±0.1 M10 - 12 DEEP 1 0 H7 - 12 DEEP 2 109 40 93 29 18.5 29.4 4.5 5.5 78 6.5 10.5 55 36.5 13 55 45* 50* 23 10 3.5 47 45 G1/4" G1/4" 8 H7 - 12 DEEP M8 - 12 DEEP 12 H7 27 314.5 MAX 200.5 45 71.5 11 32* 30* 19 68 48 45 M12x1 57 5 9 91.2 36.5 *DIMENSIONAL TOLERANCE FOR DOWEL HOLES: 0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: 0.1 REV. 01 - 29/08/2017 48 C1D _ 50E 114° MAX 56.827 79.2 201 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft ±0.05 ±0.05 ±0.05 ±0.05 ±0.1 +0.1 +0.1 -0 ±0.1
Technical information are provided for informative purpose only and can be subject to change without prior notice 29 CLAMPING Automotive Catalogue Clamping C1-Series * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 29/08/2017 C1M_50E / Manual power clamp - International mount WEIGHT 2.9 kg D2 handle included 9 10 H7 - 12 DEEP M10 - 12 DEEP 10.5 6.5 5.5 4.5 29.4 18.5 29 93 40 109 23 50* 45* 5 57 10 55 13 36.5 91.2 36.5 45 203.5 27 12 H7 8 H7 - 12 DEEP 47 3.5 G1/4" M8 - 12 DEEP 30* 32* 11 71.5 48 45 48 68 19 HOLES: 0.02 ED HOLES: 0.1 C1M150EG REV. 01 - 29/08/2017 56.827 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft 201 79.2 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 M12x1 ±0.1 ±0.1 55+0.1 +0.1 -0 D2 version 9 10 H7 - 12 DEEP M10 - 12 DEEP 10.5 6.5 5.5 4.5 29.4 18.5 29 93 40 109 23 50* 45* 5 57 10 55 13 36.5 91.2 36.5 45 203.5 27 12 H7 8 H7 - 12 DEEP 47 3.5 G1/4" M8 - 12 DEEP 30* 32* 11 71.5 48 45 48 68 19 HOLES: 0.02 ED HOLES: 0.1 C1M150EG REV. 01 - 29/08/2017 56.827 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft 201 79.2 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 M12x1 ±0.1 ±0.1 55+0.1 +0.1 -0 9 10 H7 - 12 DEEP M10 - 12 DEEP 10.5 6.5 5.5 4.5 29.4 18.5 29 93 40 109 23 50* 45* 5 57 10 55 13 36.5 91.2 36.5 45 203.5 27 12 H7 8 H7 - 12 DEEP 47 3.5 G1/4" M8 - 12 DEEP 30* 32* 11 71.5 48 45 48 68 19 WEL HOLES: 0.02 READED HOLES: 0.1 C1M150EG REV. 01 - 29/08/2 56.827 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft 201 79.2 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 M12x1 ±0.1 ±0.1 55+0.1 +0.1 -0 D1 version 9 10 H7 - 12 DEEP M10 - 12 DEEP 10.5 6.5 5.5 4.5 29.4 18.5 29 93 40 109 23 50* 45* 5 57 10 55 13 36.5 91.2 36.5 45 203.5 27 12 H7 8 H7 - 12 DEEP 47 3.5 G1/4" M8 - 12 DEEP 30* 32* 11 71.5 48 45 48 68 19 WEL HOLES: 0.02 READED HOLES: 0.1 C1M150EG REV. 01 - 29/08/2 56.827 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft 201 79.2 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 M12x1 ±0.1 ±0.1 55+0.1 +0.1 -0 Handle swivel angle Arm opening angle A Handle swivel angle 0° 3.25° 15° 27° 30° 43° 45° 59.3° 60° 75.4° 75° 89.75° 90° 101° 105° 109° 120° 114.25° 135° 117.2° Max Hand Force: 200 N
Technical information are provided for informative purpose only and can be subject to change without prior notice 30 CLAMPING Automotive Catalogue Clamping C1-Series 19 mm shaft – 15 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1901 Aluminum Central 0.41 135° 115° 135° 80° Q1901 Steel Central 0.71 135° 115° 135° 80° B1902 Aluminum Right 0.43 135° 115° 135° 80° Q1902 Steel Right 0.79 135° 115° 135° 80° B1903 Aluminum Left 0.43 135° 115° 135° 80° Q1903 Steel Left 0.79 135° 115° 135° 80° B1907 Aluminum Central 0.41 135° 115° 135° 80° B1908 Aluminum Right 0.43 135° 115° 135° 80° B1909 Aluminum Left 0.43 135° 115° 135° 80° Screws: M6x25 Tightening torque: 10 N m / 7.37 lb ft 19 mm shaft – 45 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1904 Aluminum Central 0.45 135° 135° 135° 80° Q1904 Steel Central 0.77 135° 135° 135° 80° B1905 Aluminum Right 0.46 135° 135° 135° 80° Q1905 Steel Right 0.81 135° 135° 135° 80° B1906 Aluminum Left 0.46 135° 135° 135° 80° Q1906 Steel Left 0.81 135° 135° 135° 80° Screws: M6x25 Tightening torque: 10 N m / 7.37 lb ft Clamping arms / 19 mm shaft REV. 01 - 08/02/2019 Ø9 Ø6 H7 68 48 20 95 105±0.1 80 30±0.2 (9) 30±0.02 34 28±0.1 □19 144 15±0.1 Ø9 Ø6 H7 68 48 20 95 105±0.1 80 30±0.2 (9) 30±0.02 34 28±0.1 □19 144 15±0.1 Ø9 Ø6 H7 68 48 20 95 105±0.1 80 30±0.2 (9) 30±0.02 34 28±0.1 □19 144 45±0.1 Ø9 Ø6 H7 68 48 20 95 105±0.1 80 30±0.2 (9) 30±0.02 34 28±0.1 □19 144 45±0.1 Ø 8 H7 Mount pattern for B1907 - B1908 - B1909 19 mm shaft – 25 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1921 Aluminum Central 0.43 135° 115° 135° 80° B1922 Aluminum Right 0.44 135° 115° 135° 80° B1923 Aluminum Left 0.44 135° 115° 135° 80° Screws: M6x25 Tightening torque: 10 N m / 7.37 lb ft □19 28±0.1 25±0.1 144 20 48 68 (9) 30±0.02 30±0.2 34 80 105±0.1 □19 28±0.1 25±0.1 144 20 48 68 Ø6 H7 Ø9 (9) 30±0.02 30±0.2 34 80 105±0.1 95
Technical information are provided for informative purpose only and can be subject to change without prior notice 31 CLAMPING Automotive Catalogue Clamping C1-Series C1P63E / Power clamp - International mount - 63 mm bore * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 31/03/2015 WEIGHT 3.5 kg 13 10±0.05 36.5±0.05 55 +0.1 -0 12 Ø10 H7 - 12 DEEP 7.5 105 7 45* 55±0.05 18.5 29 23±0.1 50* 93±0.1 51 209.5 332.5 MAX 11±0.1 27±0.05 32* 30* Ø8 H7 - 12 DEEP 53 3.5 71.5±0.05 112 2 7.5 12 N9 46 M8 - 12 DEEP G1/4" G1/4" 45 M12x1 29.4 40 9 54 78 □22 M10 - 12 DEEP
RkJQdWJsaXNoZXIy NzYzOTY1