Technical information are provided for informative purpose only and can be subject to change without prior notice 187 Automotive Catalogue Pivoting P-Series PIVOTING Any intermediate opening angle is available upon request - Please see the charts for table position as well as for max. opening angle The supply ports position of the brake is the same as the cylinder’s E SENSOR 80 = Ø 80 mm 100 = Ø 100 mm 125 = Ø 125 mm E = electronic sensor with M12 swivel connector - PNP A = electronic sensor with M12 swivel connector - NPN N = no sensor B = electronic sensor with M8 swivel connector - PNP 1 SUPPLY PORTS POSITION 1 = on the left side from the sensor 2 = on the front side 3 = on the right side from the sensor 4 = on the sensor’s side 1 G TABLE MOUNT PORTS N 45 BRAKE SYSTEM OPENING ANGLE B = brake N = no brake S = sensor on the brake 45° 60° 90° 120° 135° 80 SIZE E 1 G 1 N U PM Size 80, 100, 125 VERSION PM = Pivot unit PM 80 G = G thread – BSPP 1 = 3 = 4 = 2 = 45 U UNLOCK MECHANISM FOR THE BRAKE U = unlock mechanism (only for brake system: B,S) WEIGHT 22 kg PM80E___B/S_U / Pivot unit - International mount - Size 80 mm 136± 0.1 60± 0.15 96 90 interasse fori filettati ±0.15 interasse fori spina ±0.2 110± 0.1 M12x1.75 - 23 DEEP 80- 0 +0.1 80- 0 +0.1 80- 0 +0.1 Ø10 H7 - 23 DEEP 50* 90± 0.05 50± 0.1 Ø10 H7 - 12 DEEP 40 29.4 29.1 18.5 M12x1 - 6g 95 160 [A] 23.25 15 8 8 85* 30± 0.1 140± 0.1 149.2 120± 0.1 20 60* 115± 0.05 90 40 29.4 29.1 18.5 M12x1- 6g TABLE MOUNT= 4 TABLE MOUNT= 2 TABLE MOUNT= 1 145 145 90± 0.15 160 5± 0.05 TABLE MOUNT= 3 40 30 40 90± 0.15 160 145 80 50* 90± 0.05 50± 0.1 10± 0.05 UNI-ISO 228/1 - G 3/8 UNI-ISO 228/1 - G 3/8 UNI-ISO 228/1 - G 1/8 Ø12 H7 - 10 DEEP M12 - 18 DEEP M16 - 17 DEEP Ø10 H7 - 12 DEEP M12x1.75 - 18 DEEP 95 Not included in the scope of the supply A dimension opening angle A (mm) 45° 485 60° 497 90° 523 120° 548 135° 556 A * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 04/06/2025
RkJQdWJsaXNoZXIy NzYzOTY1