PNEUMAX FLUID CONTROL CATALOGUE
www.pneumaxspa.com
1 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Pneumax Fluid Control Catalogue Pneumax offers a wide range of brass and stainless steel valves and solenoid valves, suitable for use with liquid and gaseous fluids. Pneumax Fluid Control Catalogue
2 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Pneumax Fluid Control Catalogue Founded in 1976, Pneumax S.p.A. is today one of the leading, international manufacturers of components and systems for automation. It is at the fore front of a group comprised of 26 companies, with over 850 employees worldwide. Ongoing investment in research and development has allowed Pneumax to continually expand its range of standard products and customised solutions, adding to the well-established pneumatic technology, a range of electric drive actuators and fluid control components. Pneumax Group Smart Technologies and Human Competence Industrial automation Process automation Automotive The desire to provide the service and specific application skills has led to the creation of 3 business units, dedicated to Industrial Automation, Process Automation and Automotive sector. With the assistance of the specific Business unit Development Manager, Pneumax are able to design solutions than can add value to individual customer applications. Pneumatic technology Electric actuation Fluid control
3 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Pneumax Fluid Control Catalogue Pad valves Pneumatic actuated angle seat valve Servo-assisted piston and diaphragm solenoid valves Direct acting poppet type solenoid valves Components and systems for fluid control The Pneumax range of components designed for the control and management of liquid and gaseous fluids have been manufactured using selected materials (valve bodies: brass, stainless steel, seals: FPM, PTFE & EPDM) in order to guarentee maximum reliability in harsh enviroments. • ATEX versions available • Solutions for low temperatures (>-40 °C) or high temperatures (<+140 °C) • Wide range of components suitable for use with oxygen • certified solenoid coils
4 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Pneumax Fluid Control Catalogue Index Pneumax Fluid Control Introduction Direct acting poppet type solenoid valves 2/2 - 3/2 - Series F300 F3105 - 2/2 Brass body - 1/8” 9 F3106 - 2/2 Brass body - 1/8” and 1/4” 10 F3106 - 2/2 Stainless steel body - 3/8” and 1/2” 11 FX3106 - 2/2 Brass body - 1/8” ... 1/2” 12 - 13 F3110 - 2/2 Stainless steel body - 1/4” ... 1/2” 14 FX3110 - 2/2 Stainless steel body - 1/4” ... 1/2” 15 F3111 - 2/2 Stainless steel body - 1/8” 16 F3115 - 2/2 Brass body - 1/8” 17 F3170 - 2/2 Stainless steel body - 1/4” ... 1/2” 18 FX3170 - 2/2 Stainless steel body - 1/4” ... 1/2” 19 F3171 - 2/2 Stainless steel body - 1/8” 20 F3271 - 2/2 Stainless steel body - 1/8” 21 F3210 - 2/2 Stainless steel body - 1/4” ... 1/2” 22 F3211 - 2/2 Stainless steel body - 1/8” 23 F3206 - 2/2 Brass body - 1/8” ... 1/2” 24 - 25 F3305 - 3/2 Brass body - 1/8” 26 F3306 - 3/2 Brass body - 1/8” and 1/4” 27 F3310 - 3/2 Stainless steel body - 1/4” 28 F3311 - 3/2 Stainless steel body - 1/8” 29 F332 - 3/2 Stainless steel body or anodised aluminium - 1/4” 30 F3371 - 3/2 Stainless steel body - 1/8” 31 F3370 - 3/2 Stainless steel body - 1/4” 32 FX3370 - 3/2 Stainless steel body - 1/4” 33 6 F3107 Brass body and cover 1/4” ... 3” 34 - 35 FX3107 Brass body and cover 1/4” ... 3” 36 F3177 Stainless steel body and cover 3/8” ... 1” 37 FX3177 Stainless steel body and cover 3/8” ... 1” 38 Servo-assisted diaphragm solenoid valves 2/2 - Series F300
5 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Pneumax Fluid Control Catalogue F3108 Brass body and cover 3/8” ... 1” 42 F3168 Brass body and cover 3/8” ... 1” 1/2 43 F3178 Stainless steel body and cover 3/8” ... 1” 1/2 44 FX3168 Brass body - 3/8” ... 1” 45 FX3178 Stainless steel body - 3/8” ... 1” 46 Assisted-lift diaphragm solenoid valves 2/2 - Series F300 52 Solenoid coils - Series F300 F3119 Brass body and cover 1/4” ... 1/2” F3119W Brass body and cover 3/8” ... 1/2” 47 48 F3123 Brass body and cover - 3/8” 49 F3124 Brass body and cover - 1/2” 50 F3224 Brass body and cover - 1/2” 51 Servo-assisted piston solenoid valves 2/2 - Series F300 Servo-assisted diaphragm solenoid valves 2/2 - Series F300 F3277 Stainless steel body and cover 3/8” ... 1” 39 F3207 Brass body and cover 1/4” ... 3” 40 - 41 “T” body version 63 “Y” body version 64 Pad valves 2/2 - Series PVA Connection type: threaded ports 1/4” ... 3” 60 Connection type: welded connection 61 Manually actuated angle seat valves 2/2 - Series PVF Connection type: clamp ISO 2852 62 Connection type: threaded ports 1/4” ... 3” 53 Connection type: welded connection 54 Connection type: clamp ISO 2852 Connection type: clamp ASME - BPE 55 56 Connection type: flange mounting 57 Pneumatic actuated angle seat valves 2/2 - Series PVF Connection type: Multi channel 1/2” ... 1” 58 Proximity sensor 59 Pneumatic actuated valves 2/2 - Series PVF Accessories
6 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue F300 series includes a vast range of solenoid valves in brass and stainless steel designed to control air, water, steam and all fluids that are compatible with the materials used for bodies and seals. The solenoid valves are 2 or 3-way, normally closed, normally open, general service, direct acting or servo-assisted, with connections available in NPT & BSP threads from G1/8” up to G3”, with a working pressure range from vacuum to 100 bar. Solenoid valves are available with coils that conform to CESI 03 ATEX 344 certification for explosive environments. Our technical office ensures the highest standard of skill and understanding for the widest variety of applications, ensuring that the best possible solutions are found. They can be normally closed (2/2 N.C.), in this case the fluid is intercepted by the poppet at rest, with electricity applied, the input orifice is opened and the media reaches the intended use. They can be normally open (2/2 N.O.), in this case at rest the orifice remains open without electricity applied, the media reaches the intended use. When electricity is applied the input orifice closes. Performance in both cases depends solely on the magnetic field produced by the solenoid coil. The solenoid valves can also work at zero pressure. They can be normally closed (3/2 N.C.) and in this case, at rest, the incoming fluid is intercepted by the poppet and output port in connected to the exhaust port. Applying electrical power, the input orifice is opened and feed is supplied to the output. Exhaust is closed. They can be normally open (3/2 N.O.) and in this case, at rest, the input orifice is open without electricity applied, the media reaches the intended use. Exhaust is closed. Applying power, the input orifice closes and the output discharges through the exhaust port. Performance in both cases depends solely on the magnetic field produced by the solenoid coil. The solenoid valves can also work at zero pressure. Series F300 General Solenoid valves direct action 2-ways: 2-way solenoid valves have an input connection and an output connection machined in the valve body, the orifice being intercepted by the poppet moved by the core tube. Version manifactured Solenoid valves direct action 3-way: 3-way solenoid valves have an input and an output connection in the valve body and an exhaust connection fitted in the stem of the core tube. The input and exhaust orifices are intercepted directly by the poppet fitted within the core tube. Series F300
7 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Large-sized passage orifices increase the value of the static pressure which has to be overcome by the magnetic field produced by the coil. These solenoid valves are used to control high-pressure values with large diameter bores. In these models, the fluid helps in the opening or closing of the main poppet. They can be normally closed (2/2 N.C.) and have an input and a utilisation connection machined into the valve body and at rest the fluid is intercepted by the main poppet, which can be either diaphragm or a piston. In this condition, the fluid acts on both faces of the main plunger though a pinhole contributing to closure of the poppet. Applying electrical power, the secondary, or pilot, orifice opens leading to the exhaust of the fluid, which acts to close the main poppet. Greater force is thus applied when opening, the poppet is raised from the orifice and allows the media to flows to the output. In these versions, performance does not depend solely on the magnetic field produced by the coil; a minimum input pressure is also needed so as to move the diaphragm or the piston overcoming its rigidity and to keep it raised from the main orifice (Δp minimum performance). Designation Trade names General characteristics Field of use FPM (Fluorocarbon) VITON TECNOFLON FLUOREL A synthetic hexa-fluoropropylene-based elastomer. Excellent resistance to high temperatures. Excellent resistance to ozone, oxygen, mineral oils, synthetic hydraulic fluids, fuels, hydrocarbons and many chemical products. Not specific for superheated steam. For general use up to 140 °C Series F300 Servo-assisted solenoid valves Sealing materials They can be normally open (2/2 N.O.) and have an input and output connection machined into the valve body, and at rest the core tube communicates with output, a minimum-pressure difference between the feed and the output causes the main poppet to rise, leading to it opening. Applying electrical power, the secondary orifice closes and equilibrium between the pressure on the two faces of the main poppet is reinstated, and so it returns to its closed position on the main orifice. In this version a minimum working pressure is also needed.
8 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Fluid Ethyl acetate Not compatible Acetylene Compatible Vinegar Not compatible Acetone Not compatible Calcareous water Compatible Hot water <75 °C Compatible Hot water and steam <140 °C Not compatible Water with glycol Compatible Deionised water Compatible Demineralised water Compatible Hydrogen peroxide Compatible Soapy water Compatible Carbon dioxide (liquid) Not compatible Dry carbon dioxide (gas) Compatible Argon Compatible Nitrogen Compatible Petrol/Gasoline Compatible Benzol Not compatible Butane Compatible Chloroform Not compatible Ethyl Chloride Compatible Methyl chloride Not compatible Helium Compatible Heptane Compatible Hexane Compatible Ethane Compatible Ethanol Not compatible Formaldehyde Compatible Freon Not compatible Natural gas Compatible Diesel oil Compatible Glycerine Compatible Ethylene glycol Compatible Hydrogen Compatible Isobutane Compatible Isopentane Compatible Methane Compatible Methanol Not compatible Calcium monoxide Compatible Neon Compatible Nitrobenzene Not compatible Mineral oil Compatible Oxygen Compatible Pentane-n Compatible Propanol-n Compatible Propane-n Compatible Carbon sulphide Not compatible Toluene Compatible Dry trichloroethylene Compatible Xylene Compatible Series F300 The table below serves to general information relating to the compatibility between FPM (fluorocarbon) and a number of neutral fluids. Where there are corrosive fluids, in order to establish compatibility, it is important to be aware of all the data relating to use: temperature, concentration and composition of the fluid. Resistance to fluids
9 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3105CV25B => F3105AV25MI58: 2-way solenoid valve normally closed, direct acting poppet type with G connection (ISO 228) 1/8”, FPM seals, orifice 2,5 mm, solenoid coil 230 VAC (50-60 Hz) (MI58, size 22 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - Brass body - Brass guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Manual override - Chemical nickel plating surface treatment - Stainless steel guide tube - For use with oxygen - XME solenoid coil for potentially explosive environments to ATEX standards - Ex mb IIC - certified solenoid coils - Versions for use with fluid temperature at -40 °C Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Mounting position Indifferent Weight (g) with solenoid coil MI series 130 Weight (g) with solenoid coil MG series 180 G1/8” 18 18 60 28 22 (30) 8 M5 (n°2 holes) The data in brackets refer to the MG Series coil CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3105CV12B 1/8” 1,2 0,04 0 25 25 12 8 6,5 MI 22 -10 ... +140 F3105CV15B 1,5 0,06 16 16 F3105CV20B 2 0,09 12 10 F3105CV25B 2,5 0,14 8 5,5 F3105CV31B 3,1 0,19 5 2 F3105CV40B 4 0,35 4 1,5 Direct acting poppet type solenoid valves 2/2 Series F300 F3105 - 2-way solenoid valve N.C. brass body, with G connection (ISO 228) - 1/8” Pneumatic symbol Diagram 2 1
10 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam, maximum admitted pressure PS is 9 bar (relative pressure) with seals in PTFE and 2.5 bar with seals in EPDM. Example: F3106CV52B => F3106BV52MG58: 2-way solenoid valve normally closed, direct acting poppet type with G connection (ISO 228) 1/4”, FPM seals, 5,2 mm orifice, solenoid coil 230 VAC (50-60 Hz) (MG58, size 30 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - Brass body - AISI 303 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Manual override - Chemical nickel plating surface treatment - Stainless steel seat insert (up to Ø4,5) - For use with oxygen - certified solenoid coils - Versions for use with fluid temperature at -40 °C - PTFE - EPDM seals Maximum admitted pressure (bar) 100 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Ambient temperature: with class H solenoid coil (°C) -10 ... +80 Mounting position Indifferent Weight (g) with solenoid coil MG series 300 Weight (g) with solenoid coil MK series 380 F3106 - 2-way solenoid valve N.C. brass body, with G connection (ISO 228) - 1/8” and 1/4” 10.5 21.5 (24.3) 12.7 12.7 73.5 20.5 (23.5) 30 (36) G1/8” G1/4" The data in brackets refer to the MK Series coil M4 depth 5 (n°2 holes) CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A B Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3106CV10B 1/8” 1/4” 1 0,04 0 80 80 20 15 10 MG 30 -10 ... +140 F3106CV12B 1,2 0,05 60 60 F3106CV15B 1,5 0,07 30 26 F3106CV20B 2 0,1 22 20 F3106CV25B 2,5 0,15 16 14 F3106CV30B 3 0,25 15 10 F3106CV35B 3,5 0,32 10 8 F3106CV40B 4 0,36 8 5 F3106CV45B 4,5 0,41 6,5 3,5 F3106CV52B / 5,2 0,47 4 1,8 F3106CV64B / 6,4 0,64 3 1 F3106CV10B 1/8” 1/4” 1 0,04 100 100 40 30 27 MK 36 F3106CV12B 1,2 0,05 100 100 F3106CV15B 1,5 0,07 80 80 F3106CV20B 2 0,1 50 40 F3106CV25B 2,5 0,15 35 33 F3106CV30B 3 0,25 25 24 F3106CV35B 3,5 0,32 20 19 F3106CV40B 4 0,36 16 15 F3106CV45B 4,5 0,41 14 13 F3106CV52B / 5,2 0,47 10 9 F3106CV64B / 6,4 0,64 5 4,5 Pneumatic symbol Diagram 2 1
11 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 F3106 - 2-way solenoid valve N.C. brass body, with G connection (ISO 228) - 3/8” and 1/2” N.B. For use with steam, maximum admitted pressure PS is 9 bar (relative pressure) with seals in PTFE and 2.5 bar with seals in EPDM. Example: F3106CV52B => F3106DV52MK5: 2-way solenoid valve normally closed, direct acting poppet type with G connection (ISO 228) 1/2”, FPM seals, 5,2 mm orifice, solenoid coil 24 VDC (MK5, size 36 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - Brass body - AISI 303 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Chemical nickel plating surface treatment - For use with oxygen - Stainless steel seat insert (up to Ø4,5) - certified solenoid coils - Versions for use with fluid temperature at -40 °C - PTFE - EPDM seals Maximum admitted pressure (bar) 100 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Ambient temperature: with class H solenoid coil (°C) -10 ... +80 Mounting position Indifferent Weight (g) with solenoid coil MG series 360 Weight (g) with solenoid coil MK series 440 15.4 15.4 30 (36) 20.5 (23.5) 21.5 (24.3) 73.5 G3/8” G1/2" 50 - G3/8” 58 - G1/2” 25 12.5 25 The data in brackets refer to the MK Series coil M6 depth 7 (n°2 holes) CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) C D Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3106CV10B 3/8” 1/2” 1 0,04 0 80 80 20 15 10 MG 30 -10 ... +140 F3106CV12B 1,2 0,05 60 60 F3106CV15B 1,5 0,07 30 26 F3106CV20B 2 0,1 22 20 F3106CV25B 2,5 0,15 16 14 F3106CV30B 3 0,25 15 10 F3106CV35B 3,5 0,32 10 8 F3106CV40B 4 0,36 8 5 F3106CV45B 4,5 0,41 6,5 3,5 F3106CV52B 5,2 0,47 4 1,8 F3106CV64B 6,4 0,64 3 1 F3106CV10B 3/8” 1/2” 1 0,04 100 100 40 30 27 MK 36 F3106CV12B 1,2 0,05 100 100 F3106CV15B 1,5 0,07 80 80 F3106CV20B 2 0,1 50 40 F3106CV25B 2,5 0,15 35 33 F3106CV30B 3 0,25 25 24 F3106CV35B 3,5 0,32 20 19 F3106CV40B 4 0,36 16 15 F3106CV45B 4,5 0,41 14 13 F3106CV52B 5,2 0,47 10 9 F3106CV64B 6,4 0,64 5 4,5 Pneumatic symbol Diagram 2 1
12 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 FX3106 - 2-way solenoid valve N.C. brass body, with G connection (ISO 228) with certified housing: Ex d IIC T6 or T5 or T4 Gb - 1/8” and 1/4” N.B. The solenoid valve is suited for intercepting only fluids that are NOT potentially explosive. Example: FX3106CV35B => FX3106BV35A60: 2-way solenoid valve normally closed, direct acting poppet type with certified housing: Ex d IIC T6 or T5 or T4 Gb, with G connection (ISO 228) 1/4”, FPM seals, 3,5 mm orifice, solenoid coil 12 VDC (A60). Construction characteristics Technical characteristics - Brass body - Red light alloy housing - 1/2” NPT electrical connection (M20x1,5 on request) - FPM sealing assemblies OPTIONS (on request): - Manual override - Chemical nickel plating surface treatment - Stainless steel seat insert (up to Ø4,5) - Stainless steel solenoid coil housing Maximum admitted pressure (bar) 100 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature (°C) -40 ... +60 Mounting position Vertical with solenoid coil upwards Weight (g) 600 G1/8" G1/4" 1/2" NPT 43 10.5 50 60 28.5 25 28.5 40.5 90.3 22 50 104 47.5 4 26 1 2 5.3 26 CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A B Min Max AC Holding (VA) DC (W) AC DC FX3106CV10B 1/8” 1/4” 1 0,04 0 80 80 12 8 A6B= 24 Volt (AC 50-60 Hz) A6E= 220/230 Volt (AC 50-60 Hz) A60= 12 Volt (DC) A61= 24 Volt (DC) -10 ... +80 FX3106CV12B 1,2 0,05 60 60 FX3106CV15B 1,5 0,07 30 26 FX3106CV20B 2 0,1 22 20 FX3106CV25B 2,5 0,15 16 14 FX3106CV30B 3 0,25 15 10 FX3106CV35B 3,5 0,32 10 8 FX3106CV40B / 4 0,36 8 5 FX3106CV45B / 4,5 0,41 6,5 3,5 FX3106CV52B / 5,2 0,47 4 1,8 FX3106CV64B / 6,4 0,64 3 1 Pneumatic symbol Diagram 2 1
13 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. The solenoid valve is suited for intercepting only fluids that are NOT potentially explosive. Example: FX3106CV52B => FX3106DV52A60: 2-way solenoid valve normally closed, direct acting poppet type with certified housing: Ex d IIC T6 or T5 or T4 Gb, with G connection (ISO 228) 1/2”, FPM seals, 5,2 mm orifice, solenoid coil 12 VDC (A60). Construction characteristics Technical characteristics - Brass body - Red light alloy housing - 1/2” NPT electrical connection (M20x1,5 on request) - FPM sealing assemblies OPTIONS (on request): - Chemical nickel plating surface treatment - Stainless steel seat insert (up to Ø4,5) - Stainless steel solenoid coil housing Maximum admitted pressure (bar) 100 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature (°C) -40 ... +60 Mounting position Vertical with solenoid coil upwards Weight (g) 660 G3/8" G1/2” 1/2" NPT 43 12.5 50 60 28.5 25 25 50 - G3/8” 58 - G1/2” 90.1 22 50 104 47.5 4 26 5.1 FX3106 - 2-way solenoid valve N.C. brass body, with G connection (ISO 228) with certified housing: Ex d IIC T6 or T5 or T4 Gb - 3/8 and ”1/2” CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) C D Min Max AC Holding (VA) DC (W) AC DC FX3106CV10B 3/8” 1/2” 1 0,04 0 80 80 12 8 A6B= 24 Volt (AC 50-60 Hz) A6E= 220/230 Volt (AC 50-60 Hz) A60= 12 Volt (DC) A61= 24 Volt (DC) -10 ... +80 FX3106CV12B 1,2 0,05 60 60 FX3106CV15B 1,5 0,07 30 26 FX3106CV20B 2 0,1 22 20 FX3106CV25B 2,5 0,15 16 14 FX3106CV30B 3 0,25 15 10 FX3106CV35B 3,5 0,32 10 8 FX3106CV40B 4 0,36 8 5 FX3106CV45B 4,5 0,41 6,5 3,5 FX3106CV52B 5,2 0,47 4 1,8 FX3106CV64B 6,4 0,64 3 1 Pneumatic symbol Diagram 2 1
14 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam, maximum admitted pressure PS is 9 bar (relative pressure) with seals in PTFE and 2.5 bar with seals in EPDM. Example: F3110CV25B => F3110BV25MG5: 2-way solenoid valve normally closed, direct acting poppet type with G connection (ISO 228) 1/4”, FPM seals, 2,5 mm orifice, solenoid coil 24 VDC (MG5, size 30 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - AISI 303 stainless steel body - AISI 303 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Silver advance ring - For use with oxygen - certified solenoid coils - Versions for use with fluid temperature at -40 °C - PTFE - EPDM seals Maximum admitted pressure (bar) 100 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Ambient temperature: with class H solenoid coil (°C) -10 ... +80 Mounting position Indifferent Weight (g) with solenoid coil MG series 360 Weight (g) with solenoid coil MK series 440 F3110 - 2-way solenoid valve N.C. stainless steel body, with G connection (ISO 228) - 1/4” ... 1/2” 15.4 15.4 20.5 (23.5) 21.5 (24.3) 73.5 44 - G1/4" 50 - G3/8" 58 - G1/2" 30 (36) 25 12.5 25 G1/4” G3/8” G1/2” M6 depth 7 (n°2 holes) The data in brackets refer to the MK Series coil CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) B C D Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3110CV10B 1/4” 3/8” 1/2” 1 0,04 0 80 80 20 15 10 MG 30 -10 ... +140 F3110CV12B 1,2 0,05 60 60 F3110CV15B 1,5 0,07 30 26 F3110CV20B 2 0,1 22 20 F3110CV25B 2,5 0,15 16 14 F3110CV30B 3 0,25 15 10 F3110CV35B 3,5 0,32 10 8 F3110CV40B 4 0,36 8 5 F3110CV45B 4,5 0,41 6,5 3,5 F3110CV52B 5,2 0,47 4 1,8 F3110CV64B 6,4 0,64 3 1 F3110CV10B 1/4” 3/8” 1/2” 1 0,04 100 100 40 30 27 MK 36 F3110CV12B 1,2 0,05 100 100 F3110CV15B 1,5 0,07 80 80 F3110CV20B 2 0,1 50 40 F3110CV25B 2,5 0,15 35 33 F3110CV30B 3 0,25 25 24 F3110CV35B 3,5 0,32 20 19 F3110CV40B 4 0,36 16 15 F3110CV45B 4,5 0,41 14 13 F3110CV52B 5,2 0,47 10 9 F3110CV64B 6,4 0,64 5 4,5 Pneumatic symbol Diagram 2 1
15 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. The solenoid valve is suited for intercepting only fluids that are NOT potentially explosive. Example: FX3110CV52B => FX3110DV52A60: 2-way solenoid valve normally closed, direct acting poppet type with certified housing: Ex d IIC T6 or T5 or T4 Gb, with G connection (ISO 228) 1/2”, FPM seals, 5,2 mm orifice, solenoid coil 12 VDC (A60). Construction characteristics Technical characteristics - AISI 303 stainless steel body - AISI 303 stainless steel guide tube - AISI 302 stainless steel springs - Red light alloy or stainless steel housing - 1/2” NPT electrical connection (M20x1,5 on request) - FPM sealing assemblies Maximum admitted pressure (bar) 100 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature (°C) -40 ... +60 Mounting position Vertical with solenoid coil upwards Weight (g) 660 90.1 22 50 104 47.5 4 26 44 - G1/4" 50 - G3/8" 58 - G1/2" 1/2" NPT 43 12.5 50 60 28.5 25 25 G1/4" G3/8" G1/2" 5.1 FX3110 - 2-way solenoid valve N.C. stainless steel body, with G connection (ISO 228) with certified housing: Ex d IIC T6 or T5 or T4 Gb - 1/4” ... 1/2” CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) B C D Min Max AC Holding (VA) DC (W) AC DC FX3110CV10B 1/4” 3/8” 1/2” 1 0,04 0 80 80 12 8 A6B= 24 Volt (AC 50-60 Hz) A6E= 220/230 Volt (AC 50-60 Hz) A60= 12 Volt (DC) A61= 24 Volt (DC) -10 ... +80 FX3110CV12B 1,2 0,05 60 60 FX3110CV15B 1,5 0,07 30 26 FX3110CV20B 2 0,1 22 20 FX3110CV25B 2,5 0,15 16 14 FX3110CV30B 3 0,25 15 10 FX3110CV35B 3,5 0,32 10 8 FX3110CV40B 4 0,36 8 5 FX3110CV45B 4,5 0,41 6,5 3,5 FX3110CV52B 5,2 0,47 4 1,8 FX3110CV64B 6,4 0,64 3,5 1 Pneumatic symbol Diagram 2 1
16 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3111CV25B => F3111AV25MI58: 2-way solenoid valve normally closed, direct acting poppet type with G connection (ISO 228) 1/8”, FPM seals, 2,5 mm orifice, solenoid coil 230 VAC (50-60 Hz) (MI58, size 22 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - AISI 303 stainless steel body - AISI 303 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Silver advance ring - For use with oxygen - XME solenoid coil for potentially explosive environments to ATEX standards - Ex mb IIC - certified solenoid coils - Versions for use with fluid temperature at -40 °C Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Mounting position Indifferent Weight (g) with solenoid coil MI series 150 Weight (g) with solenoid coil MG series 200 22 (30) 57 35 G1/8" 10 10 18 18 M4 depth 6 (n°2 holes) The data in brackets refer to the MG Series coil CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3111CV12B 1/8” 1,2 0,04 0 25 25 12 8 6,5 MI 22 -10 ... +140 F3111CV15B 1,5 0,06 16 16 F3111CV20B 2 0,09 12 10 F3111CV25B 2,5 0,14 8 5,5 F3111CV31B 3,1 0,19 5 2 F3111CV20B 1/8” 2 0,09 25 15 15 11 5 MG 30 F3111CV25B 2,5 0,14 16 8 F3111CV31B 3,1 0,19 8 4 F3111 - 2-way solenoid valve N.C. stainless steel body, with G connection (ISO 228) - 1/8” Pneumatic symbol Diagram 2 1
17 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 Example: F3115CV25B => F3115AV25MI5: 2-way solenoid valve, direct acting poppet type with G connection (ISO 228) 1/8”, FPM seals, 2,5 mm orifice, solenoid coil 24 VDC (MI5, size 22 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - Brass body - Brass guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Chemical nickel plating surface treatment - Stainless steel guide tube - XME solenoid coil for potentially explosive environments to ATEX standards - Ex mb IIC Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Mounting position Indifferent Weight (g) 140 - + - + 18 18 22 60 28 8 G1/8” M3 depth 5 (n°2 holes) CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A Min Max DC (W) Series Size F3115CV12B 1/8” 1,2 0,04 0 12 2 MI/DC 22 -10 ... +120 F3115CV15B 1,5 0,06 8 2 20 5 F3115CV20B 2 0,09 3 2 12 5 F3115CV25B 2,5 0,14 1 2 5 5 8 6,5 F3115CV31B 3,1 0,19 2 5 3,5 6,5 F3115 - 2-way solenoid valve brass body, with G connection (ISO 228) bistable impulse drive - 1/8” Pneumatic symbol Diagram The bistable function is achieved by the use of a polarized permanent magnet energizing the coil with a DC current for at least 15ms in the reverse direction of the preceding impulse. 2 1
18 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam, maximum admitted pressure PS is 9 bar (relative pressure) with seals in PTFE and 2.5 bar with seals in EPDM. Example: F3170CV25B => F3170BV25MG5: 2-way solenoid valve normally closed, direct acting poppet type with G connection (ISO 228) 1/4”, FPM seals, 2,5 mm orifice, solenoid coil 24 VDC (MG5, size 30 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - AISI 316 stainless steel body - AISI 316 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 316 stainless steel springs - Silver advance ring - FPM sealing assemblies OPTIONS (on request): - For use with oxygen - certified solenoid coils - Versions for use with fluid temperature at -40 °C - PTFE - EPDM seals Maximum admitted pressure (bar) 100 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Ambient temperature: with class H solenoid coil (°C) -10 ... +80 Mounting position Indifferent Weight (g) with solenoid coil MG series 360 Weight (g) with solenoid coil MK series 440 F3170 - 2-way solenoid valve N.C. stainless steel body, with G connection (ISO 228) - 1/4” ... 1/2” 15.4 15.4 20.5 (23.5) 21.5 (24.3) 73.5 44 - G1/4" 50 - G3/8" 58 - G1/2" 30 (36) 25 12.5 25 G1/4” G3/8” G1/2” M6 depth 7 (n°2 holes) The data in brackets refer to the MK Series coil CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) B C D Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3170CV10B 1/4” 3/8” 1/2” 1 0,04 0 80 80 20 15 10 MG 30 -10 ... +140 F3170CV12B 1,2 0,05 60 60 F3170CV15B 1,5 0,07 30 26 F3170CV20B 2 0,1 22 20 F3170CV25B 2,5 0,15 16 14 F3170CV30B 3 0,25 15 10 F3170CV35B 3,5 0,32 10 8 F3170CV40B 4 0,36 8 5 F3170CV45B 4,5 0,41 6,5 3,5 F3170CV10B 1/4” 3/8” 1/2” 1 0,04 100 100 40 30 27 MK 36 F3170CV12B 1,2 0,05 100 100 F3170CV15B 1,5 0,07 80 80 F3170CV20B 2 0,1 50 40 F3170CV25B 2,5 0,15 35 33 F3170CV30B 3 0,25 25 24 F3170CV35B 3,5 0,32 20 19 F3170CV40B 4 0,36 16 15 F3170CV45B 4,5 0,41 14 13 Pneumatic symbol Diagram 2 1
19 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. The solenoid valve is suited for intercepting only fluids that are NOT potentially explosive. Example: FX3170CV45B => FX3170DV45A60: 2-way solenoid valve normally closed, direct acting poppet type with certified housing: Ex d IIC T6 or T5 or T4 Gb, with G connection (ISO 228) 1/2”, FPM seals, 4,5 mm orifice, solenoid coil 12 VDC (A60). Construction characteristics Technical characteristics - AISI 316 stainless steel body - AISI 316 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - Silver advance ring - AISI 316 stainless steel springs - Red light alloy or stainless steel housing - 1/2” NPT electrical connection (M20x1,5 on request) - FPM sealing assemblies Maximum admitted pressure (bar) 100 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature (°C) -40 ... +60 Mounting position Vertical with solenoid coil upwards Weight (g) 660 90.1 22 50 104 47.5 4 26 44 - G1/4" 50 - G3/8" 58 - G1/2" 1/2" NPT 43 12.5 50 60 28.5 25 25 G1/4" G3/8" G1/2" 5.1 FX3170 - 2-way solenoid valve N.C. stainless steel body, with G connection (ISO 228) with certified housing: Ex d IIC T6 or T5 or T4 Gb - 1/4” ... 1/2” CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) B C D Min Max AC Holding (VA) DC (W) AC DC FX3170CV10B 1/4” 3/8” 1/2” 1 0,04 0 80 80 12 8 A6B= 24 Volt (AC 50-60 Hz) A6E= 220/230 Volt (AC 50-60 Hz) A60= 12 Volt (DC) A61= 24 Volt (DC) -10 ... +80 FX3170CV12B 1,2 0,05 60 60 FX3170CV15B 1,5 0,07 30 26 FX3170CV20B 2 0,1 22 20 FX3170CV25B 2,5 0,15 16 14 FX3170CV30B 3 0,25 15 10 FX3170CV35B 3,5 0,32 10 8 FX3170CV40B 4 0,36 8 5 FX3170CV45B 4,5 0,41 6,5 3,5 Pneumatic symbol Diagram 2 1
20 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3171CV25B => F3171AV25MI58: 2-way solenoid valve normally closed, direct acting poppet type with G connection (ISO 228) 1/8”, FPM seals, 2,5 mm orifice, solenoid coil 230 VAC (50-60 Hz) (MI58, size 22 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - AISI 316 stainless steel body - AISI 316 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - Silver advance ring - AISI 316 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - For use with oxygen - XME solenoid coil for potentially explosive environments to ATEX standards - Ex mb IIC - certified solenoid coils - Versions for use with fluid temperature at -40 °C Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Mounting position Indifferent Weight (g) with solenoid coil MI series 150 Weight (g) with solenoid coil MG series 200 22 (30) 57 35 G1/8" 10 10 18 18 M4 depth 6 (n°2 holes) The data in brackets refer to the MG Series coil CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3171CV12B 1/8” 1,2 0,04 0 25 25 12 8 6,5 MI 22 -10 ... +140 F3171CV15B 1,5 0,06 16 16 F3171CV20B 2 0,09 12 10 F3171CV25B 2,5 0,14 8 5,5 F3171CV31B 3,1 0,19 5 2 F3171CV20B 1/8” 2 0,09 25 15 15 11 5 MG 30 F3171CV25B 2,5 0,14 16 8 F3171CV31B 3,1 0,19 8 4 F3171 - 2-way solenoid valve N.C. stainless steel body, with G connection (ISO 228) - 1/8” Pneumatic symbol Diagram 2 1
21 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3271CV25B => F3271AV25MI58: 2-way solenoid valve normally open, direct acting poppet type with G connection (ISO 228) 1/8”, FPM seals, 2,5 mm orifice, solenoid coil 230 VAC (50-60 Hz) (MI58, size 22 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - AISI 316 stainless steel body - AISI 316 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - Silver advance ring - AISI 316 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - For use with oxygen - XME solenoid coil for potentially explosive environments to ATEX standards - Ex mb IIC - certified solenoid coils - Versions for use with fluid temperature at -40 °C Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Mounting position Indifferent Weight (g) 150 22 61 G1/8" 10 10 18 18 35 M4 depth 6 (n°2 holes) CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3271CV12B 1/8” 1,2 0,04 0 19 19 12 8 6,5 MI 22 -10 ... +140 F3271CV15B 1,5 0,06 14 14 F3271CV20B 2 0,09 8 8 F3271CV25B 2,5 0,14 4,5 4,5 F3271CV31B 3,1 0,19 2,5 2,5 F3271 - 2-way solenoid valve N.O. stainless steel body, with G connection (ISO 228) - 1/8” Pneumatic symbol Diagram 2 1
22 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3210CV25B => F3210BV25MG5: 2-way solenoid valve normally open, direct acting poppet type with G connection (ISO 228) 1/4”, FPM seals, 2,5 mm orifice, solenoid coil 24 VDC (MG5, size 30 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - AISI 303 stainless steel body - AISI 303 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Silver advance ring - For use with oxygen - certified solenoid coils - Versions for use with fluid temperature at -40 °C - Manual override Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Ambient temperature: with class H solenoid coil (°C) -10 ... +80 Mounting position Indifferent Weight (g) with solenoid coil MG series 300 Weight (g) with solenoid coil MK series 380 F3210 - 2-way solenoid valve N.O. stainless steel body, with G connection (ISO 228) - 1/4” ... 1/2” 20.5 (23.5) 21.5 (24.3) 30 (36) 15.4 15.4 79 44 - G1/4" 50 - G3/8" 58 - G1/2" 25 12.5 25 G1/4” G3/8” G1/2” M6 depth 7 (n°2 holes) The data in brackets refer to the MK Series coil CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) B C D Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3210CV15B 1/4” 3/8” 1/2” 1,5 0,07 0 23 / 20 15 / MG/AC 30 -10 ... +140 F3210CV20B 2 0,1 17 F3210CV25B 2,5 0,15 12 F3210CV30B 3 0,25 9 F3210CV35B 3,5 0,32 7 F3210CV40B 4 0,36 5,5 F3210CV45B 4,5 0,41 4,5 F3210CV52B 5,2 0,47 3 F3210CV15B 1/4” 3/8” 1/2” 1,5 0,07 / 18 / / 10 MG/DC 30 F3210CV20B 2 0,1 11 F3210CV25B 2,5 0,15 7 F3210CV30B 3 0,25 6,5 F3210CV35B 3,5 0,32 4 F3210CV40B 4 0,36 3,5 F3210CV45B 4,5 0,41 3 F3210CV52B 5,2 0,47 2,2 F3210CV15B 1/4” 3/8” 1/2” 1,5 0,07 23 23 40 30 27 MK (AC/DC) 36 F3210CV20B 2 0,1 17 17 F3210CV25B 2,5 0,15 12 12 F3210CV30B 3 0,25 9 9 F3210CV35B 3,5 0,32 7 7 F3210CV40B 4 0,36 5,5 5,5 F3210CV45B 4,5 0,41 4,5 4,5 F3210CV52B 5,2 0,47 3 3 F3210CV64B 6,4 0,64 3,5 3,5 Pneumatic symbol Diagram Direct acting poppet type solenoid valves 2/2 Series F300 2 1
23 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3211CV25B => F3211AV25MI58: 2-way solenoid valve normally open, direct acting poppet type with G connection (ISO 228) 1/8”, FPM seals, 2,5 mm orifice, solenoid coil 230 VAC (50-60 Hz) (MI58, size 22 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - AISI 303 stainless steel body - AISI 303 stainless steel guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - XME solenoid coil for potentially explosive environments to ATEX standards - Ex mb IIC - For use with oxygen - certified solenoid coils - Versions for use with fluid temperature at -40 °C - Manual override Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Mounting position Indifferent Weight (g) 150 F3211 - 2-way solenoid valve N.O. stainless steel body, with G connection (ISO 228) - 1/8” 22 61 G1/8" 10 10 18 18 35 M4 depth 6 (n°2 holes) CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3211CV12B 1/8” 1,2 0,04 0 19 19 12 8 6,5 MI 22 -10 ... +140 F3211CV15B 1,5 0,06 14 14 F3211CV20B 2 0,09 8 8 F3211CV25B 2,5 0,14 4,5 4,5 F3211CV31B 3,1 0,19 2,5 2,5 Pneumatic symbol Diagram 2 1
24 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3206CV25B => F3206BV25MG5: 2-way solenoid valve normally open, direct acting poppet type with G connection (ISO 228) 1/4”, FPM seals, 2,5 mm orifice, solenoid coil 24 VDC (MG5, size 30 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - Brass body - Brass guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Stainless steel guide tube - Chemical nickel plating surface treatment - certified solenoid coils - Versions for use with fluid temperature at -40 °C - Manual override Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Ambient temperature: with class H solenoid coil (°C) -10 ... +80 Mounting position Indifferent Weight (g) with solenoid coil MG series 300 Weight (g) with solenoid coil MK series 380 F3206 - 2-way solenoid valve N.O. brass body, with G connection (ISO 228) - 1/8” and 1/4” G1/8" G1/4" 10.5 30 (36) 12.7 12.7 79 40.5 20.5 (23.5) 21.5 (24.3) The data in brackets refer to the MK Series coil M4 depth 5 (n°2 holes) CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A B Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3206CV15B 1/8” 1/4” 1,5 0,07 0 23 / 20 15 / MG/AC 30 -10 ... +140 F3206CV20B 2 0,1 17 F3206CV25B 2,5 0,15 12 F3206CV30B 3 0,25 8 F3206CV35B 3,5 0,32 7 F3206CV40B 4 0,36 5,5 F3206CV45B 4,5 0,41 4,5 F3206CV52B 5,2 0,47 3 F3206CV15B 1/8” 1/4” 1,5 0,07 / 18 / / 10 MG/DC 30 F3206CV20B 2 0,1 11 F3206CV25B 2,5 0,15 7 F3206CV30B 3 0,25 6,5 F3206CV35B 3,5 0,32 4 F3206CV40B 4 0,36 3,5 F3206CV45B 4,5 0,41 3 F3206CV52B 5,2 0,47 2,2 F3206CV15B 1/8” 1/4” 1,5 0,07 23 23 40 30 27 MK (AC/DC) 36 F3206CV20B 2 0,1 17 17 F3206CV25B 2,5 0,15 12 12 F3206CV30B 3 0,25 8 8 F3206CV35B 3,5 0,32 7 7 F3206CV40B 4 0,36 5,5 5,5 F3206CV45B 4,5 0,41 4,5 4,5 F3206CV52B 5,2 0,47 3 3 F3206CV64B 6,4 0,64 3,5 3,5 Pneumatic symbol Diagram 2 1
25 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 2/2 Series F300 N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3206CV25B => F3206DV25MG5: 2-way solenoid valve normally open, direct acting poppet type with G connection (ISO 228) 1/2”, FPM seals, 2,5 mm orifice, solenoid coil 24 VDC (MG5, size 30 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - Brass body - Brass guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Stainless steel guide tube - Chemical nickel plating surface treatment - certified solenoid coils - Versions for use with fluid temperature at -40 °C - Manual override Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Ambient temperature: with class H solenoid coil (°C) -10 ... +80 Mounting position Indifferent Weight (g) with solenoid coil MG series 300 Weight (g) with solenoid coil MK series 380 F3206 - 2-way solenoid valve N.O. brass body, with G connection (ISO 228) - 3/8” and 1/2” 15.4 15.4 79 25 12.5 25 30 (36) 20.5 (23.5) 21.5 (24.3) G3/8” G1/2" 50 - G3/8” 58 - G1/2” The data in brackets refer to the MK Series coil M6 depth 7 (n°2 holes) CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) C D Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC F3206CV15B 3/8” 1/2” 1,5 0,07 0 23 / 20 15 / MG/AC 30 -10 ... +140 F3206CV20B 2 0,1 17 F3206CV25B 2,5 0,15 12 F3206CV30B 3 0,25 9 F3206CV35B 3,5 0,32 7 F3206CV40B 4 0,36 5,5 F3206CV45B 4,5 0,41 4,5 F3206CV52B 5,2 0,47 3 F3206CV15B 3/8” 1/2” 1,5 0,07 / 18 / / 10 MG/DC 30 F3206CV20B 2 0,1 11 F3206CV25B 2,5 0,15 7 F3206CV30B 3 0,25 6,5 F3206CV35B 3,5 0,32 4 F3206CV40B 4 0,36 3,5 F3206CV45B 4,5 0,41 3 F3206CV52B 5,2 0,47 2,2 F3206CV15B 3/8” 1/2” 1,5 0,07 23 23 40 30 27 MK (AC/DC) 36 F3206CV20B 2 0,1 17 17 F3206CV25B 2,5 0,15 12 12 F3206CV30B 3 0,25 9 9 F3206CV35B 3,5 0,32 7 7 F3206CV40B 4 0,36 5,5 5,5 F3206CV45B 4,5 0,41 4,5 4,5 F3206CV52B 5,2 0,47 3 3 F3206CV64B 6,4 0,64 3,5 3,5 Pneumatic symbol Diagram 2 1
26 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice PNEUMAX FLUID CONTROL Pneumax Fluid Control Catalogue Direct acting poppet type solenoid valves 3/2 Series F300 N.B. For use with steam maximum admitted pressure PS is 2,5 bar (relative pressure). Example: F3305CV12B => F3305AV12MI5: 3-way solenoid valve normally closed, direct acting poppet type with G connection (ISO 228) 1/8”, FPM seals, 1,2 mm inlet orifice, solenoid coil 24 VDC (MI5, size 22 for more information, please refer to the section “Solenoid coils - Series F300”). Construction characteristics Technical characteristics - Brass body - Brass guide tube - AISI 430FR stainless steel mobile and fixed core - AISI 302 stainless steel springs - FPM sealing assemblies OPTIONS (on request): - Stainless steel guide tube - Chemical nickel plating surface treatment - XME solenoid coil for potentially explosive environments to ATEX standards - Ex mb IIC - certified solenoid coils - Exhaust port with hosetail connection - Versions for use with fluid temperature at -40 °C - Manual override Maximum admitted pressure (bar) 50 Maximum fluid viscosity (mm²/s) 25cSt Ambient temperature: with class F solenoid coil (°C) -10 ... +55 Mounting position Universal Weight (g) 110 F3305 - 3-way solenoid valve brass body, with G connection (ISO 228) - 1/8” 18 18 22 M5 G1/8” 60 8 28 M3 depth 5 (n° 2 holes) CODE “V”= FPM seals G connection (ISO 228) C= Connection Orifice (mm) KV (m3/h) Differential pressure (bar) Power consumption B= Solenoid coil Temperature range (°C) A Inlet Exhaust Min Max AC Inrush (VA) AC Holding (VA) DC (W) Series Size AC DC N.C. - Normally closed -10 ... +140 F3305CV12B 1/8” 1,2 1,5 0,04 0 15 15 12 8 6,5 MI 22 F3305CV15B 1,5 1,5 0,06 10 10 F3305CV20B 2 1,7 0,09 6 6 N.O. - Normally open F3305CV15SB 1/8” 1,5 1,5 0,06 0 10 10 12 8 6,5 MI 22 F3305CV17SB 1,7 2 0,07 6 6 U - Universal F3305CV15UB 1/8” 1,5 1,5 0,06 0 6 6 12 8 6,5 MI 22 Pneumatic symbol Diagram N.C. N.O. N.C. N.A. U 2 1 3 2 1 3 2 1 3
RkJQdWJsaXNoZXIy NzYzOTY1