Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 Air distribution Solenoid valves manifold ISO 15407-2 1 | 124 Series 2700 EVO - Configurator Rules and configuration scheme Repeating numbers of the module _ Indicate the number of repeats of the same module Module 1 ...-... See page ‘Single pneumatic module configurator’ Module 2 ...-... See page ‘Single pneumatic module configurator’ Repeating numbers of the module _ Indicate the number of repeats of the same module Module n ...-... See page ‘Single pneumatic module configurator’ Right Endplate TD 00 Right Endplate with 5-1-3 open ports W Right Endplate with 5-1-3 closed ports XY Right Endplate with 1-3 closed ports ZX Right Endplate with 5-1 closed ports ZY Right Endplate with 5-3 closed ports X Right Endplate with 1 closed port Y Right Endplate with 3 closed port Z Right Endplate with 5 closed port Repeating numbers of the module _ Indicate the number of repeats of the same module Electronic components ...-... See page ‘Electronic components configurator in technopolymer’ - - - - - - CONFIGURATION CODE Left endplates TS30P Endplate with electronic interface V27 TS30P Note: When composing the configuration, always bear in mind that the maximum number of electrical signals available is: • 32 if a 37-pole multi-pin module is used, if a node or IO-Link interface is used. • 24 if a 25-pole multi-pin module is used. If a monostable valve is used on a bistable type base (2 electrical signals occupied), an electrical signal is lost. However, this makes it possible to replace the monostable valve with a bistable valve in the same position. Use bases with dedicated closed ports to interrupt ducts 1, 3 and 5. If one or more ports must be interrupted more than once, the addition of the intermediate supply/discharge module is necessary. Configurable on Cadenas platform
RkJQdWJsaXNoZXIy NzYzOTY1