Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 Air distribution Solenoid valves manifold ISO 15407-2 1 | 130 Series 2700 EVO - Module assembly instructions 5 1. Assemble the desired modules and tighten the fixing screws as shown in the figure below. 2. Complete the assembly with the 3100.KT.00 left endplate kit. 3. To lock: rotate anticlockwise (in the direction of the LOCK print on the case). To unlock: rotate clockwise (in the direction of the UNLOCK print on the case). The same procedure shall be used to add or remove any module. Modules assembled for vertical configuration 3 2.5 Modules for vertical configuration are as follows: • Single external supply module • Flow regulator module • Shut-off and exhaust module • Pressure regulator Attention: The flow rate of the solenoid valve will be reduced compared to that shown in the general catalogue
RkJQdWJsaXNoZXIy NzYzOTY1