CAT24-EN

Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 Air distribution Solenoid valves manifold 1 | 40 Series 3000 EVO - MANIFOLD - Configurator Rules and configuration scheme Module 1 ...-... See page ‘Pneumatic module configurator’ Repeating numbers of the module _ Indicate the number of repeats of the same module (no value for a single module) Repeating numbers of the module _ Indicate the number of repeats of the same module (no value for a single module) Repeating numbers of the module _ Indicate the number of repeats of the same module (no value for a single module) Module n ...-... See page ‘Single pneumatic module configurator’ Accessory diaphragm plug (Optional) X Diaphragm plug on port 1 Y Diaphragm plug on port 3 Z Diaphragm plug on port 5 Electric parts ...-... See page “Electronic components configurator in technopolymer” CONFIGURATION CODE Configurable on Cadenas platform Note: When composing the configuration, always bear in mind that the maximum number of electrical signals available is: • 48 if a serial node or IO-Link interface is used. • 40 if a 44-pole multi-pin is used. • 32 if a 37-pole multi-pin module is used. • 24 if a 25-pole multi-pin module is used. Each position on the manifold occupies two electrical signals; if a monostable valve is used, an electrical signal is lost. However, this makes it possible to replace the monostable valve with a bistable valve in the same position. Diaphragm plugs are used to interrupt ports 1, 3 and 5 of the sub-base. If it is necessary to interrupt more than one port at the same time, put the letters that identify their position in sequence (e.g.: if it is necessary to intercept the ports 3 and 5 you must put the letters YZ). If one or more ports must be interrupted more than once, the addition of the intermediate supply/discharge module is necessary. Module 2 ...-... See page ‘Pneumatic module configurator’ Accessory diaphragm plug (Optional) X Diaphragm plug on port 1 Y Diaphragm plug on port 3 Z Diaphragm plug on port 5 ( ) - - - - - - ( ) ( ) Version 31 3100 version 34 3400 version Manifold version A Self feeding E External feeding Number of available solenoid valve positions (standard) 4 6 8 10 12 16 20 24 Check the number of available solenoid valve positions

RkJQdWJsaXNoZXIy NzYzOTY1