147 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Function fittings Series TECNOFUN Pneumatic fittings Valves and function fittings 551.12T.A.B.XX In line pressure regulator ART. TYPE T 2 = 0 - 2 bar 4 = 0 - 4 bar 8 = 0 - 8 bar A Connection A - see connections list B Connection B - see connections list SEE CONNECTIONS LIST 00 = None D4 = Straight Ø4 D6 = Straight Ø6 D8 = Straight Ø8 L1 = Female banjo G1/8” G4 = Rotating banjo Ø4 G6 = Rotating banjo Ø6 G8 = Rotating banjo Ø8 M1 = G1/8” male M2 = G1/4” male F1 = G1/8” female Technical characteristics • The pressure regulator is a device which is used to reduce, regulate and stabilize theair pressure in a conduit in order to adapt it to the needs of the equipments to be supplied. The pressure regulator incorporates the relieving function. • Panel mounting using the lock nut supplied as standard. • On DIN rail using the relevant adaptor kit (see accessories). • With 90° bracket (see accessories). • Directly on the support plate thanks to two through holes on the body. Technical characteristics • Fluid: Filtered and lubricated air or non • Working ports size: see connections list • Max working pressure: 10 bar • Temperature: -5 °C ... + 50 °C • Weight: 31 g • Flow rate at 6 bar with Δp=1 (Nl/min): 180 Nl/min • Pressure range: 0 ... 2 / 0 ... 4 / 0 ... 8 bar Pneumatic symbols 18.5 25 3.2 18 30 9 075 58 15 11 3 max. 551.22T.A.B.XX 90° pressure regulator ART. TYPE T 2 = 0 - 2 bar 4 = 0 - 4 bar 8 = 0 - 8 bar A Connection A - see connections list B Connection B - see connections list SEE CONNECTIONS LIST 00 = None D4 = Straight Ø4 D6 = Straight Ø6 D8 = Straight Ø8 L1 = Female banjo G1/8” G4 = Rotating banjo Ø4 G6 = Rotating banjo Ø6 G8 = Rotating banjo Ø8 M1 = G1/8” male M2 = G1/4” male F1 = G1/8” female Technical characteristics • The pressure regulator is a device which is used to reduce, regulate and stabilize the air pressure in a conduit in order to adapt it to the needs of the equipments to be supplied. The pressure regulator incorporates the relieving function. • Panel mounting using the lock nut supplied as standard. • On DIN rail using the relevant adaptor kit (see accessories). • On DIN rail using the relevant adaptor kit (see accessories). • Directly on the support plate thanks to two through holes on the body. Technical characteristics • Fluid: Filtered and lubricated air or non • Working ports size: see connections list • Max working pressure: 10 bar • Temperature: -5 °C ... + 50 °C • Weight: 31 g • Flow rate at 6 bar with Δp=1 (Nl/min): 180 Nl/min • Pressure range: 0 ... 2 / 0 ... 4 / 0 ... 8 bar Pneumatic symbols Note Example: 551.128.D8.D8.XX In line pressure regulator, pressure range (bar) 0-8 bar. Connections “A” and “B” Tube Ø8. For the dimension including cartridges see page Accessories - Function fittings Note Example: 551.224.M1.D6.XX 90° pressure regulator, pressure range (bar) 0 - 4 bar. Connections “A” Male G1/8 and “B” Tube Ø6. For the dimension including cartridges see page Accessories - Function fittings M x A B B A 18 18.5 25 63 15 30 3.2 11 M9x0.75
RkJQdWJsaXNoZXIy NzYzOTY1