CAT25-EN

154 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Function fittings Series TECNOFUN Pneumatic fittings Valves and function fittings 551.2FT.A.B.XX 90° blocking valve + flow control valve ART. Technical characteristics • The combination of this two functions ensures that the downstream pressure is maintained in case of accidental loss of supply pressure and at the same time grants the possibility to regulate the circuit flow rate. A typical application of this combination is close to or directly assembled onto the actuator connection ports. This allows to keep pressurised the cylinder chamber in case of accidental loss of supply pressure and to regulate the exhaust flow rate when the blocking valve is actuated. • The possible combinations are the following: - 90° unidirectional blocking valve + unidirectional flow control valve - 90° bidirectional blocking valve + bidirectional flow control valve - 90° bidirectional blocking valve + unidirectional flow control valve - 90° unidirectional blocking valve + bidirectional flow control valve Technical characteristics • Fluid: Filtered and lubricated air or non • Working ports size: see connections list • Max working pressure: 0,5 ... 10 bar • Temperature: -5 °C ... + 50 °C • Orifice size: Ø3 mm • Flow rate at 6 bar with Δp=1 (Nl/min): 285 Nl/min • Weight: 62 g Note Example: 5512F1.00.00.XX 90° blocking valve + flow control valve. Without connections “A” and “B”. For the dimension including cartridges see page Accessories - Function fittings TYPE T 1 = 90° unidirectional blocking valve + unidirectional flow control valve 2 = 90° bidirectional blocking valve + bidirectional flow control valve 3 = 90° unidirectional blocking valve + bidirectional flow control valve 4 = 90° bidirectional blocking valve + unidirectional flow control valve A Connection A - see connections list B Connection B - see connections list SEE CONNECTIONS LIST 00 = None D4 = Straight Ø4 D6 = Straight Ø6 D8 = Straight Ø8 L1 = Female banjo G1/8” G4 = Rotating banjo Ø4 G6 = Rotating banjo Ø6 G8 = Rotating banjo Ø8 M1 = G1/8” male M2 = G1/4” male F1 = G1/8” female Piloting curves Supply pressure (bar) Piloting pressure (bar) A B 18 13 18 30 44 M5 14 M11x1 3.2 55.5 41 18.5 18.5 13 Pneumatic symbols

RkJQdWJsaXNoZXIy NzYzOTY1