Technical information are provided for informative purpose only and can be subject to change without prior notice 27 Automotive E-Range Caution Any maintenance operation may only be carried out by qualified and authorized personnel. For any reason, do not reach into the pivoting range of the clamping arms, when the clamps are in operation. Disconnect electric supply lines before operating on or around clamps. Clamp installation to the tool The clamp can be installed by one of its four mounting surfaces, using dowels and screws according to its datasheet. The tightening torques to be set are: M5 5 N m / 3.68 lb·ft M6 10 N m / 7.37 lb·ft M8 25 N m / 18.43 lb·ft M10 35 N m / 25.81 lb·ft M12 50 N m / 36.87 lb·ft Use the key support surfaces, where available. Always use all the bores on the mounting pattern. QIG_C_EN Rev.00 09.2015 A worksheet for the right sizing of the clamp is available upon request. Visit our website for technical documents http://automotive.pneumax.it/ Clamping Quick installation guide Arm mount options 1 Position 2 Position 3 Position 4 Position The above pictures show the closed position. The max. opening angle according to the arm mount option is indicated on each clamp arm’s datasheet. In order to achieve a right or left arm mount in configurations 2 or 3, the clamping arm should be rotated by 180°, therefore to achieve C___ 2A03 a right clamp arm is required, i.e. B/Q _ _02 C___ 2A02 a left clamp arm is required, i.e. B/Q _ _03 C___ 2A05 a right clamp arm is required, i.e. B/Q_ _06 C___ 2A06 a left clamp arm is required, i.e. B/Q_ _05 C1_ _ _ _2A03 using a right _ _02 arm C1_ _ _ _2A02 using a left _ _03 arm E48-Smart Clamping Quick installation guide CLAMPING
RkJQdWJsaXNoZXIy NzYzOTY1