Overall dimensions and technical information are given for information purposes only and are subject to change without notice 52 Electric linear axes Catalogue GENERAL DATA Max. speed [m/s] 5 5 5 Max. acceleration [m/s²] 50 50 50 Repeatability [mm] ± 0.05 ± 0.05 ± 0.05 Guide type Type ball recirculation Top & side guide size 15 15 20 Belt type Type 16-AT5 16-AT5 32-AT10 Pulley primitive diameter [mm] 38.21 50.95 63.9 Displacement per pulley revolution [mm] 120 200 200 Number of blocks n 1 + 1 1 + 1 1 + 1 DIMENSIONAL DATA L: Carriage length [mm] 2 x 120 2 x 120 2 x 165 L1: Head length [mm] 60 60 90 L2: Distance hole to carriage edge X [mm] 10 10 20 L3: Carriage hole centre distance X [mm] 100 50 62.5 W: Carriage width [mm] 59 75 118 W1: Head width [mm] 60 60 80 W2: Carriage hole centre distance Y [mm] 50 60 100 W3: Distance hole to carriage edge Y [mm] 4.5 7.5 9 H: Carriage height [mm] 80 100 115 H1: Head height [mm] 45 60 90 D: Pulley hole diameter [mm] Ø22 H7 Ø32 H7 Ø40 H7 D1: Fixing hole diameter on drive head [mm] M4x8 M5x10 M6x12 D2: Carriage bore diameter [mm] M5x10 M8x16 M10x20 L4: Head hole centre distance X [mm] 50 50 70 W4: Head hole centre distance Y [mm] 50 50 70 L5: Groove centre distance X [mm] 30 40 80 L6: Groove-edge distance X-axis [mm] 15 20 20 H3: Groove centre distance Y [mm] 30 30 30 S: Max. stroke [mm] 5500 5500 5500 T: Total length [mm] L1+20+L+S+L+20+L1 L1+25+L+S+L+25+L1 L1+25+L+S+L+25+L1 Protection Option [mm] Stainless steel sheet MASS DATA Base with zero stroke [kg] 3.9 5.8 7.1 Mass per 100 mm of stroke [kg] 1.1 1.1 1.6 Complete carriage [kg] 0.8 3.2 3.2 SECTION MOMENTS OF INERTIA Moment of inertia Lyy [cm4] 17.3 75 120 Moment of inertia Lzz [cm4]. 46.7 151 429 MAXIMUM RECOMMENDED LOADS (*,**) Fx [N] 823 823 3969 Fy [N] 723.5 3415 4841 Fz [N] 998 4180 6945 Mx [Nm] 8 17 43 My [Nm] 29 95 553 Mz [Nm] 28 79 390 MLBTHPO120-AX12 MLBTHPO080-AX12 MLBTHPO060-AX12 HPO SERIES (*) The maximum recommended loads are intended as the maximum value that can be applied individually and statically. In the case of combined load configurations, please contact the AutomationWare technical department. (**) Forces and moments assessed on the individual carriage. In the case of non-symmetrical loads, please contact AutomationWare technical department
RkJQdWJsaXNoZXIy NzYzOTY1