Overall dimensions and technical information are given for information purposes only and are subject to change without notice 66 Electric linear axes Catalogue GENERAL DATA Max. speed (**) [m/s] 0.2-0.6 0.5-1-1.7 0.6-1.3-2.4 0.8-1.6-2.8 Max. acceleration [m/s²] 50 50 50 50 Repeatability [mm] 0.01 0.01 0.01 0.01 Guide type Type ball recirculation Guide size mm 15 15 15 25 Screw diameter mm 10 16 20 25 Screw pitch [mm/rev] 3-10 5-10-16 5-10-20 5-10-25 Number of blocks n 1 2 2 2 DIMENSIONAL DATA L: Carriage length [mm] 120 190 260 360 L1: Motorised head length [mm] 39 30 49.5 65 L2: Conducted head length [mm] 9.5 15 20 65 L3: Distance hole to carriage edge X [mm] 10 20 30 30 L4: Carriage hole centre distance X [mm] 50 50 50 60 L5: Carriage pin holes centre distance X+/-0.05 [mm] 108 - - - L6: Distance pin hole to carriage edge X [mm] 6 - - - W: Carriage width [mm] 43 59 75 118 W1: Motorised head width [mm] 60 60 80 120 W2: Conducted head width [mm] 45 60 80 120 W3: Carriage hole centre distance Y [mm] 35 50 60 100 W4: Distance hole to carriage edge Y [mm] 4 4.5 7.5 9 W5: Distance pin hole to carriage edge Y [mm] 21.5 - - - H: Carriage height [mm] 58 80 100 115 H1: Motorized head height [mm] 65.5 79 112.6 124 H2: Conducted head height [mm] 60 79 98.5 124 L7: Shank length [mm] 11 17 38 25 L8: Footprint length [mm] 20 36 47 38 D: Shank size [mm] 8 10 12 14 H3: Screw centre height [mm] 35,5 49 67.6 76.4 D1: Fixing hole diameter on drive head [mm] M4x8 M4x8 M6x12 M6x12 D2: Carriage bore diameter [mm] M4x8 M5x10 M8x16 M10x20 D3: Carriage pin hole diameter [mm] Ø2.5 H7 - - - L9: Head hole centre distance X [mm] 47.14 50 70 70 H4: Head hole centre distance Y [mm] 47.14 50 70 70 L10: Groove centre distance X [mm] - 30 40 80 L11: Groove-edge distance X-axis [mm] - 15 20 20 H5: Groove centre distance Y [mm] - 30 30 30 S: Max. stroke [mm] 400 800 1000 1000 T: Total length [mm] L8+L1+5+L+S+5+L2 Protection Option Stainless steel sheet MASS DATA Base with zero stroke [kg] 1.5 2.7 6.0 17.3 Mass per 100 mm of stroke [kg] 0.5 0.6 1.2 1.8 Complete carriage [kg] 0.4 0.9 1.3 5.4 SECTION MOMENTS OF INERTIA Moment of inertia Lyy [cm4] 7.1 17.3 74.4 120 Moment of inertia Lzz [cm4]. 13.8 47.6 151.2 492 MAXIMUM RECOMMENDED LOADS (*) Fx (***) [N] 300/415 660-830-970 1010-1270-1600 1650-2245-3100 Fy [N] 2530 2016 6830 9682 Fz [N] 3105 2485 8360 13890 Mx [Nm] 14 15 34 85 My [Nm] 59 170 694 1105 Mz [Nm] 51 133 351 780 MLSTHPR120-AX12 MLSTHPR080-AX12 MLSTHPR060-AX12 MLSTHPR045-AX11 HPR SERIES (*) The maximum recommended loads are intended as the maximum value that can be applied individually and statically. In the case of combined load configurations, please contact the AutomationWare technical department. (**) Data refer to a stroke of 400 mm. Different strokes result in different speed limits, contact AutomationWare's technical department for a detailed study. (***) Load value refers to a useful life of 2000 km.
RkJQdWJsaXNoZXIy NzYzOTY1