Overall dimensions and technical information are given for information purposes only and are subject to change without notice 78 Electric linear axes Catalogue GENERAL DATA Max. speed (**) [m/s] 0.7-1.3-2.5 0.7-1.3-2.5 Max. acceleration [m/s²] 50 50 Repeatability [mm] ± 0.01 ± 0.01 Guide type Type ball recirculation Guide size mm 20 20 Screw diameter mm 20 20 Screw pitch [mm/rev] 05-10-20 05-10-20 Number of blocks n 2 4 DIMENSIONAL DATA L: Carriage length [mm] 180 260 L1: Motorised head length [mm] 20 20 L2: Conducted head length [mm] 20 20 L3: Distance hole to carriage edge X [mm] 10 10 L4: Carriage hole centre distance X [mm] 80 60 L5: Carriage pin holes centre distance X+/-0.05 [mm] 140 220 L6: Distance pin hole to carriage edge X [mm] 20 20 W: Carriage width [mm] 158 158 W1: Motorised head width [mm] 160 160 W2: Conducted head width [mm] 160 160 W3: Carriage hole centre distance Y [mm] 70 70 W4: Distance hole to carriage edge Y [mm] 9 9 W5: Distance pin hole to carriage edge Y [mm] 79 79 H: Carriage height [mm] 100 100 H1: Motorized head height [mm] 115 115 H2: Conducted head height [mm] 99 99 L7: Shank length [mm] 25 25 L8: Footprint length [mm] 54 54 D: Shank size [mm] 12 12 H3: Screw centre height [mm] 70 70 D1: Fixing hole diameter on drive head [mm] M6x12 M6x12 D2: Carriage bore diameter [mm] M8x16 M8x16 D3: Carriage pin hole diameter [mm] Ø6 H7 Ø6 H7 L9: Head hole centre distance X [mm] 70 70 H4: Head hole centre distance Y [mm] 70 70 L10: Groove centre distance X [mm] 40 40 L11: Groove-edge distance X-axis [mm] 20 20 H5: Groove centre distance Y [mm] 30 30 S: Max. stroke [mm] 1000 1000 T: Total length [mm] L8+L1+8.5+L+S+8.5+L2 Protection Option Bellows MASS DATA Base with zero stroke [kg] 7.8 8.6 Mass per 100 mm of stroke [kg] 1,7 1.5 Complete carriage [kg] 2.1 2.5 SECTION MOMENTS OF INERTIA Moment of inertia Lyy [cm4] 176 176 Moment of inertia Lzz [cm4]. 1096 1096 MAXIMUM RECOMMENDED LOADS (*) Fx (***) [N] 1010-1270-1600 1010-1270-1600 Fy [N] 4055 5134 Fz [N] 5545 9289 Mx [Nm] 296 368 My [Nm] 437 837 Mz [Nm] 177 288 MLSNPLS160-AX24 MLSNPLS160-AX22 PLS SERIES (*) The maximum recommended loads are intended as the maximum value that can be applied individually and statically. In the case of combined load configurations, please contact the AutomationWare technical department. (**) Data refer to a stroke of 400 mm. Different strokes result in different speed limits, contact AutomationWare's technical department for a detailed study. (***) Load value refers to a useful life of 2000 km.
RkJQdWJsaXNoZXIy NzYzOTY1