Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Spool type valves and solenoid valves Series T200 1 Air distribution 1 | 54 Series T200 The T200 series, consist of a broad range of valves with various type of actuation. The connections for this series are from G 1/8" to G 1/4". The main components constituting the valves of the Tecno228 series are manufactured with high performance technopolymer. The use of technopolymer has resulted in a light weight product which can be offered to the market at very interesting prices. The T228 valves, are manufactured with G1/8” connections, 3 and 5 ways function, mechanical or pneumatically operated, monostable spring or pneumatic return, bistable and in 5 ways 3 positions version with closed, open and pressured centres. This series is completely interchangable with the standard 228 series (with alluminium body). The T224 valves, are manufactured with G 1/4” connections, 3/2, 5/2 and 5/3 ways function, (monostable or bistable), depending on version and actuation (manual, pneumatic, or electrical), and self aligning (pneumatic, electric or spring). Maximum fitting torque Thread Maximum torque (Nm) G 1/8" 4 G1/4" 9 Construction characteristics G 1/8" (T228) and G 1/4" (T224) Body Technopolymer Operators Technopolymer Seals NBR Spacers Technopolymer Spools Technopolymer Stainless steel only for the versions Push button-Spring and Lever lateral Springs Spring steel Pistons Technopolymer Use and maintenance This valves have an average life of 15 million cycles depending on the application and air quality. Filtered and lubricated air using specified lubricants will reduce the wear of the seals and ensures long and trouble free operation. Please ensure that the valve is being used according with the manufacturers specification, such as air pressure and temperature. The exhaust port of the distributor has to be protected in a dusty and dirty environment. Repair kits including the spool complete with seals are available for overhauling the valves. However, although this is a simple operation it should be carried out by a competent person. ATTENTION: use hydraulic oil class H for lubrication such as CASTROL MAGNA SW32.
RkJQdWJsaXNoZXIy NzYzOTY1