Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Rodless cylinders 3 | 211 Series 1605 - Ø16 - Fixing device 3 Pneumatic actuation 1600.16.03F (1 piece) 1600.16.04F (1 piece) 69 min 42.5 max 48 O-Ring M3x35 26 Ø 5.8 3.5 Ø 3.2 123.5 + stroke 30 ►Oscillating hinge Ordering code Direct mounting without brackets ► Ordering code The kit comprises: n°2 pins (plated zinc steel) n°2 grub screw (steel) n°1 oscillating hinge (plated zinc steel) mounting sequence: - mount the pin into the dedicated housing - tighten the blocking grub screws in the dedicated housing The kit comprises: n°4 screws M3x35 (plated zinc steel) n°2 O-Rings (NBR) Direct mounting without brackets Thanks to the mounting holes with counter bores on the end caps it is possible to mount the cylinder directly onto the mounting surface. Having the end caps and barrel flush and in contact with the mounting plate it is not necessary to use any intermediate mounting brackets even in case of long strokes. It is also possible to supply air to the cylinder directly through the mounting plate through the two air connection on the bottom side of the end cap (06.MH and 07.MH) which are machined with counterbores. Pin Grub screw Oscillating hinge 42 44 1±1 Ø 5.5 3 M5 (n°4 holes) 25 Ø 5.5 (n°4 holes) 16 50 60
RkJQdWJsaXNoZXIy NzYzOTY1