Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Pneumatic grippers Series RT 3 Pneumatic actuation 3 | 245 Series RT The swing clamp cylinder has been developed to meet the need to clamp a workpiece by means of a clamping arm which when released would unclamp rotate 90 degrees in order to allow unrestricted access to the workpiece; the stroke of the swing movement is 21mm. They are supplied in two bore sizes Ø40 and Ø50 in magnetic or non magnetic versions. The swing clamp cylinder is available with standard clamping stroke lengths of 10, 20, 30 and 50mm with both right (R) or left (L) rotation. The following accessories are available: - The clamp bracket can be re-positioned through 360 degree on the piston rod - Rubber clamping tip - Front and rear flange for fixing Available sensors: - SA series mounted directly in the groove - SR series mounted with adapter 1380.01.F - SQ and SU series mounted with adapter 1500.22F (for ordering codes and characteristics see sensors section in the general catalogue) Construction characteristics Seals N Version: PUR piston rod seals, NBR piston seals P Version: PUR piston rod seals, PUR piston seals V Version: FPM piston rod seals, FPM piston seals Piston Aluminium Piston rod C43 chromed steel End caps Aluminium Operational characteristics Fluid filtered and preferably lubricated air or not (if lubricated the lubrication must be continuous) Min. working pressure (bar) 1 Max. pressure (bar) 10 Working temperature (°C) -5 ... +70 N Version (magnetic or non magnetic piston) -30 ... +80 P Version (magnetic or non magnetic piston) -5 ... +80 V Version (magnetic piston) -5 ... +150 V Version (non magnetic piston) Stroke of rotation movement R / L 90° (mm) 21 Standard linear clamping strokes (mm) 10, 20, 30, 50 Theoretical clamping force at 10 bar (N) 924 (Ø40) - 1610 (Ø50) Please follow the suggestions below to ensure a long life for these cylinders: - Use of good air quality - Observe the application advice carefully - Operating pressure (see clamping pressure graph) - Translation speed ≤ 50 mm/sec.
RkJQdWJsaXNoZXIy NzYzOTY1