Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Series ST Miniaturised magnetic sensors 3 Pneumatic actuation 3 | 267 Round section versions, 90° cable Weight g 22 Weight g 10 Ordering code (2 wires) cable 2 mt. (3 wires) cable 3 mt. (3 wires) cable 100 mm, M8 connector (use MCH1 or MCH2 connectors) X=point of commutation 6 mm X=point of commutation 6 mm 6 mm PNP PNP Diagrams and connections Cable ordering code 135 30 M8x1 4,5 4,5 9 9 14 X 14 X 4 2,8 Slot detail type “D” 4 4,5 3,5 Slot detail type “C” 3.05 Ø4.25 2.55 ►Sensor with cable ►Ampulla Reed sensors, with led, DC, N.O. (Normally open) 1583.DC ►Hall effect sensors, with led, N.O. (Normally open) 1583.HAP THR.P MCH1 MCH2 Connector Sensor 1 Brown (+) 4 Black (signal) 3 Blue (-) Connection 3 wires cable 3 wires l=2.5m with M8 connector cable 3 wires l=5m with M8 connector TECHNICAL CHARACTERISTICS Type of contact Maximum current Maximum permanent power Voltage range Working temperature Maximum voltage drop Cable Degree of protection 1583.DC 1583.HAP THR.P N.O. -10°C - +70°C 0,5 V Ø2,6 mm PVC - 3 m 4,5 - 28 V DC 50mA 3,5 V 0,6 W 1,5 W 10 - 28V DC IP 67 20mA Ø2,6 mm PVC - 2 m The load (LOAD) can be connected either to negative or positive pole * Hall-PNP effect (3 wires) with Reed bulb (2 wires) * BLU BRN POWER Load BLK BLU BRN POWER Load Sensor with cable and M8 connector
RkJQdWJsaXNoZXIy NzYzOTY1