Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Spool valves and solenoid valves Series 2600 1 Air distribution 1 | 162 Series 2600 General They have been designed to be easily assembled into groups or manifolds. The 2600 series comprises a range of products classified according to the body size of 26mm divided into 3 types "LINE", "FLAT" and "VDMA". Is not included the integral electrical connection Construction characteristics Central body Extruded aluminium bar with chemical nickel treatment and PTFE (polytetrafleurethylene) Connection plates Die-cast aluminium Operators Technopolymer Spool seals Oil resistant nitrile rubber - HNBR Spools Aluminium 2011 Springs AISI 302 stainless steel Pistons Technopolymer Piston seals Oil resistant nitrile rubber - NBR Ordering codes for minature solenoid valves The 15 mm. miniature solenoid valve with 1,1 mm. orifice has been selected for piloting this series of valves (see Series 300). This results in low response times and reduced power consumption. The valve can be supplied with the coil upward or downward (multipolar connections) depending on the application. Codes are as follows: Coil upward code 01 = miniature solenoid 12 VDC 02 = miniature solenoid 24 VDC 05 = miniature solenoid 24 VAC 06 = miniature solenoid 110 VAC 07 = miniature sol. 230 VAC 08 = miniature sol. 24 VDC 1W 09 = miniature sol. 24 VDC Earth faston Coil downward code 11 = miniature solenoid 12 VDC 12 = miniature solenoid 24 VDC 15 = miniature solenoid 24 VAC 16 = miniature solenoid 110 VAC 17 = miniature sol. 230 VAC 18 = miniature sol. 24 VDC 1W Downward 19 = miniature sol. 24 VDC Earth faston Downward Miniature solenoid homologated are available (see Series 300). Use and maintenance The average life of the solenoid valve exceeds 50.000.000 cycles when used under optimum conditions. Adequate lubrication reduces seals wear, just as proper filtering of supply air prevents the build-up of dirt that can cause malfunction. Ensure the valve is used within our recommended criteria for pressure and temperature. In dirty or dusty environments, the exhaust ports should be protected. A seal kit including the spool is available for overhauling the valve. This operation does not require a skilled worker, although a particular care should be taken when reassembling the valve.
RkJQdWJsaXNoZXIy NzYzOTY1