Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 Air distribution Direct operated solenoid valves 1 | 176 Series 300 - Size 10 mm 3 1 2 3 1 2 1 Construction characteristics Functional schematics for standard version AT REST AT REST AT REST ACTUATED ACTUATED ACTUATED 2 2 1 2 1 2 3 1 2 3 1 2 1 3 2 1 3 Pneumatic Electric 0 ... 7 bar 0,7 mm -5° ... +50°C 14 Nl/min 22 NI/min 50 million 5:4:4 12 ... 24 Volt D.C. 1,3 Watt -5% ... +10% 8 ms 10 ms F (155°C) IP65 (with cables) IP40 (with connectors) IP00 (with Faston) Technical characteristics Standard version This series of directly operated vales is characterized by its reduced dimensions. They are designed to be mounted individually or on manifold. The high operating speed and high flow rate in consideration of the reduced dimensions, in combination with the high compatibility of the material used to manufacture them ensure a high variety of possible application fields. All valves have manual override as standard and are available in 3/2 configuration N.O. and N.C. as well as 2/2 N.C. both 12 or 24 V DC or AC. Electrical connection can be via co moulded cables or via connector, in this configuration a LED indicates the coil status. Ensure that the fixing screws are tightened with 0.15 Nm maximum. 1 = SUPPLY PORT 2 = OUTLET PORT 3 = EXHAUST PORT Normally Closed (N.C.) 3/2 Normally Closed (N.C.) 2/2 Normaly Open (N.O.) 3/2 Electrical part Miniature solenoid consisting of a coil made of copper wire of different diameters depending on voltage,isolated according to "F" class standard, with injection-moulded nylon-glass application. All parts forming the cladding, the electrical connections and the pole pieces are protected against corrosion. Mechanical part Stainless steel 430F armatures FPM poppets body in thermoplastic material and manual override and plug in nickel plated brass. Valves must be mounted on single or multiple manifold to be used. (*) "Response time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001, Pneumatic fluid power - Directional control valves - Measurement of shifting time" Protection degree Working pressure Orifice size Temperature Flow rate at 6 bar with ∆p=1 bar Exhaust flow rate Life expectancy, number of cycles per minute Voltages Power Voltage tollerance Response time when energized * Response time when de-energized * Copper wire isolation class Compressed air, purity class according to ISO 8573-1:2010
RkJQdWJsaXNoZXIy NzYzOTY1