Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 AIR DISTRIBUTION 1 | 180 This series of directly operated vales is characterized by its reduced dimensions. The high operating speed and high flow rate in consideration of the reduced dimensions, in combination with the high compatibility of the material used to manufacture them ensure a high variety of possible application fields. All valves have manual override as standard and are available in 3/2 configuration N.O. and N.C. as well as 2/2 N.C. both 12 or 24 V DC or AC. Electrical connection can be via co moulded cables or via connector, in this configuration a LED indicates the coil status. Ensure that the fixing screws are tightened with 0.15 Nm maximum. The 10mm Speed-up version are built in accordance to the ISO 15218-2003 standard with a flow rate of 24Nl/min. The coil integrates a dedicated circuit board which enables to contain the power consumption to 0.35 W in case of the high flow rate version and to 0.1W in case of the standard flow rate version. Functional schematics for standard version 1 = SUPPLY PORT 2 = OUTLET PORT 3 = EXHAUST PORT 3 1 2 AT REST Normally Closed (N.C.) 3/2 ACTUATED 2 3 1 2 3 1 AT REST ACTUATED 3 1 2 2 1 3 2 1 3 Normaly Open (N.O.) 3/2 AT REST ACTUATED 1 2 2 1 2 1 Normally Closed (N.C.) 2/2 Functional schematics for Speed-up version **non tradotto** **non tradotto** **non tradotto** AT REST ACTUATED 1 2 2 1 2 1 Normally Closed (N.C.) 2/2 Construction characteristics Electrical part Miniature solenoid consisting of a coil made of copper wire of different diameters depending on voltage, isolated according to "F" class standard, with injection-moulded nylon-glass application. All parts forming the cladding, the electrical connections and the pole pieces are protected against corrosion. Mechanical part Stainless steel 430F armatures FPM poppets body in thermoplastic material and manual override and plug in nickel plated brass. Valves must be mounted on single or multiple manifold to be used. Technical characteristics Pneumatic Standard Version Speed-Up Version Working pressure (bar) 0 ... 7 Orifice size (mm) 0,7 1.1 Temperature °C -5° ... +50 Flow rate at 6 bar with Δp=1 (Nl/min) 14 24 Exhaus flow rate (NI/min) 22 29 Life expectancy, number of cycles per minute (millions) 50 Compressed air, purity class according to ISO 8573-1:2010 5:4:4 Electric Standard Version Speed-Up Version Voltages 12 ... 24 VDC Power (Watt) 1,3 0,35 (1) Voltage tollerance -5% ... +10% Responce time according to ISO 12238, activation time (ms) 8 Responce time according to ISO 12238, deactivation time (ms) 10 Copper wire isolation class F (155°C) Protection degree IP65 (with cables), IP40 (with connectors), IP00 (with Faston) “Shifting time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001” (1) = consumption wrapping in opening phase 3, 5W (10 ms), consumption wrapping in maintenance phase 0.35 W. Direct operated solenoid valves Series 300
RkJQdWJsaXNoZXIy NzYzOTY1