Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 AIR DISTRIBUTION 1 | 184 This direct operated solenoid valve has minimum overall dimensions (15 mm wide). Its construction method is same as 10 mm valve, of course. It is suitable to be single or gang mounted or as electro-operator for larger air flow distributors. Can be utilized with compressed air and other fluids compatible with material used to build the solenoid valve. The available versions, all equipped with manual overide, are 3 ways, normally closed and normally open with DC and AC 50/60 Hz. It's possible to install the N.O. valve on N.C. interface by using the registered reverse system included in the valve body. The electrical connection is made with cables (300 mm.), FASTON or with connector. This type of miniature solenoid valve is interchangeable with most of the same products available on the market. Make sure that the fastening screews are tightened with maximum torque of 0,75 Nm. Constructive features 1 = SUPPLY PORT 2 = OUTLET PORT 3 = EXHAUST PORT AT REST Normally Closed (N.C.) 3/2 ACTUATED 3 1 2 1 2 3 1 2 3 AT REST Normaly Open (N.O.) 3/2 ACTUATED 3 1 3 3 2 2 1 1 Construction characteristics Electrical part Miniature solenoid consisting of a coil made of copper wire of different diameters depending on voltage, isolated according to "F" class standard, with injection-moulded nylon-glass application. All parts forming the cladding, the electrical connections and the pole pieces are protected against corrosion. Mechanical part AISI 430F cores, AISI 302 return springs, FPM poppets, thermoplastic polyester body. Technical characteristics Pneumatic Orifice size (mm) 0.8 1.1 1,5 (only D.C.) Flow rate at 6 bar with Δp=1 (Nl/min) 20 30 50 Working pressure for N.C. 0 ... 10 0 ... 7 Working pressure for N.O. / 0 ... 8 0 ... 5 Temperature °C -5° ... +50°C Max number of cycles per minute (millions) 50 (with standard working conditions) Compressed air, purity class according to ISO 8573-1:2010 5:4:4 Elettriche Voltage D.C. 24 VDC 12 ... 24 VDC Voltage A.C. / 24-110-230 Volt 50/60 Hz / Power consumption D.C. 1 Watt 2,3 Watt Power consumption A.C. / 2,8 VA (at starting) 2,5 VA (at speed) / Voltage tollerance -5% ... +10% Response time * 10 ... 12 Isolating class F (155°C) Protection degree IP65 (with cables), IP40 (with connectors), IP00 (with Faston) “Shifting time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001” Direct operated solenoid valves Series 300
RkJQdWJsaXNoZXIy NzYzOTY1