Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Direct operated solenoid valves Series 300 1 Air distribution 1 | 202 3 1 2 1 2 3 1 2 1 2 3 2 1 2 1 3 1 2 3 2 3 1 Functional schematic 1 = 2 = 3 = Normally Closed (N.C.) 3/2 or 2/2 Normally Open (N.O.) 3/2 or 2/2 INLET PORT OUTLET PORT EXHAUST PORT (Plugged if 2/2) AT REST AT REST ACTUATED ACTUATED Electrical parts: Solenoids: the solenoid consists of coils having different diameter copper wire windings insulated according standards "H"; they are encased in a nylon-glass compound. All parts are corrosion resistant. Mechanical parts: Stainless steel tube and plunger (AISI 430F), stainless steel adjusted springs, viton poppet seals, tropicalized zinc alloy interface plate, nitrile (NBR) seal nickeled brass manual override, nickel steel coil lock nut, zinc steel mounting screws. To be usable, the solenoids have to be attached either to a base or directly to the distributor's operators by means of connectors G 1/8".Electrical connectors are standard. These solenoid are available in all voltages and frequences used in the world. The following are the technical characteristics of the solenoid. Construction characteristics
RkJQdWJsaXNoZXIy NzYzOTY1