Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice “NAMUR” valves and solenoid valves Series 514/N 1 | 283 1 Air distribution Series 514/N General The 514/N Solenoid valves, are 2 stage valves actuated electro-pneumatically. A series 300 directly operated solenoid valve actuates pneumatically the principal power distributor. Everything is well integrated in a practical configuration that also permits applications where there is limited space. Used primarily to operate rotary actuators and wherever there is a NAMUR standard installation plan. The pilot air is normally taken from the inlet port (autofeed) and the only actuating signal is electric. The range of the solenoid valves, as far as dimensions and mechanical construction, is similar to series 200. We have therefore solenoid valves G 1/4" with identical pneumatic characteristics that are, however, actuated electrically. They have a balanced spool, insentive to presence or absence of pressure. They are constructed in 3 and 5 way with 1 solenoid (monostable) or 2 solenoids (bistable). “NAMUR” interface dimensions: according to standard (VDI/VDE 3847 July 2003) Construction characteristics Body Aluminium Spacer Technopolymer Seals NBR Springs Spring steel Operators Aluminium Spools Nickel plated steel Screws Zinc coated Steel Use and maintenance This valves have an average life of 15 million cycles depending on the application and air quality. Filtered and lubricated air using specified lubricants will reduce the wear of the seals and ensures long and trouble free operation. Please ensure that the valve is being used according with the manufacturers specification, such as air pressure and temperature. The exhaust port of the distributor has to be protected in a dusty and dirty environment. Repair kits including the spool complete with seals are available for overhauling the valves. However, although this is a simple operation it should be carried out by a competent person. ATTENTION: use hydraulic oil class H for lubrication such as MAGNA GC 32 (Castrol).
RkJQdWJsaXNoZXIy NzYzOTY1