Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Accessories - Function fittings Series 55 Tecno-FUN 1 Air distribution 1 | 359 ►Circuit selector valve - OR A B C 18 30 18.5 25 3.2 15 Coding: 551.141.A.B.C A CONNECTION A SEE CONNECTIONS LIST B CONNECTION B SEE CONNECTIONS LIST C CONNECTION C SEE CONNECTIONS LIST CONNECTIONS LIST 00 = None D4 = Straight Ø4 D6 = Straight Ø6 D8 = Straight Ø8 L1 = Female banjo G1/8" G4 = Rotating banjo Ø 4 G6 = Rotating banjo Ø 6 G8 = Rotating banjo Ø 8 M1 = G1/8" male M2 = G1/4" male F1 = G1/8" female Example: 551.141.D8.D8.D8 Circuit selector valve - OR. Connections "A", "B" and "C" Tube Ø8 NOTE : For the dimension including cartridges see page Accessories - Function fittings Construction characteristics - These valves have two inlets and one output connection and are normally called high pressure selector valves as, when receiving two separate pressure supply, only allow the passage of the highest pressure. The most common application is to operate a component from two separate positions. - on DIN rail using the relevant adaptor kit (see accessories) - With 90° bracket (see accessories) - directly on the support plate thanks to two through holes on the body Technical characteristics Fluid Filtered air. No lubrication needed, if applied it shall be continuous Working ports size See CONNECTIONS LIST Max working pressure (bar) 10 Flow rate at 6 bar with Δp=1 (Nl/min) 600 Temperature °C -5 ÷ +50 Weight (g) 10 ►Circuit selector valve - AND A B C 18 30 18.5 25 3.2 15 Coding: 551.151.A.B.C A CONNECTION A SEE CONNECTIONS LIST B CONNECTION B SEE CONNECTIONS LIST C CONNECTION C SEE CONNECTIONS LIST CONNECTIONS LIST 00 = None D4 = Straight Ø4 D6 = Straight Ø6 D8 = Straight Ø8 L1 = Female banjo G1/8" G4 = Rotating banjo Ø 4 G6 = Rotating banjo Ø 6 G8 = Rotating banjo Ø 8 M1 = G1/8" male M2 = G1/4" male F1 = G1/8" female Example: 551.151.D6.D6.D6 Circuit selector valve AND. Connections "A", "B" and "C" Tube Ø6 NOTE : For the dimension including cartridges see page Accessories - Function fittings Construction characteristics - These valves have two inlets and one output connection and are normally called low pressure selector valves as, when receiving two separate pressure supply, only allow the passage of the lowest pressure. The most common application is to operate a component from two separate positions. - on DIN rail using the relevant adaptor kit (see accessories) - With 90° bracket (see accessories) - directly on the support plate thanks to two through holes on the body Technical characteristics Fluid Filtered air. No lubrication needed, if applied it shall be continuous Working ports size See CONNECTIONS LIST Max working pressure (bar) 10 Flow rate at 6 bar with Δp=1 (Nl/min) 550 Temperature °C -5 ÷ +50 Weight (g) 10
RkJQdWJsaXNoZXIy NzYzOTY1