Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 8 Input/Output Module 1 Air distribution Solenoid valves manifold ISO 15407-2 1 | 382 Series 2700 - Accessories 1 4 3 With this kind of control the I/O module can only be used as an output. Pin 1 of each connector is not connected. The output voltage will be 0.7V lower than that applied to Pin 4 of the connector. The maximum output current for each output is 100mA. The correspondence between control byte and each single output depends on how many electrical signals are used by the manifold and by the relative position of the I/O module. B) Control via fieldbus: Please note: I/O modules don’t allow to connect any additional valves manifold after them. Please note: 2700 solenoid valve manifolds manage up to 32 signals. If the manifold uses more than 24 signals the I/O module will manage only the remainder. Connections that are not managing useful signals will remain unconnected. Attention: No more additions are possible Attention: Output only Attention: Output only Attention: Only one more I/O module can be added. Attention: Signal Not connected GND Connected Through line Connected Attention: Output only Attention: Signal Not connected GND Connected Attention: No more additions are possible Attention: Output only 1 2 3 4 ... 21 22 23 24 Multi-pole connector pin 37 poles Connector 8 9 10 11 12 13 1415 Multi-pole connector pin 37 poles Connector 1 2 3 4 ... 21 22 23 24 29 30 31 32 Not connected Serial node Outlet Pin 1 2-3 4-5 6 7 Module 1 8 9 10 11 12 13 1415 Serial node Outlet Pin 1 2-3 4-5 6 7 Module 2 8 9 10 11 12 13 1415 16 17 18 19 20 21 22 23 Module 1 ... 1 2 3 4 25 26 27 28 Not connected Serial node Outlet Pin 29 30 31 32 Serial node Outlet Pin Input Module 1 2-3 4-5 6 7 8 9 10 11 12 13 1415 16 17 18 19 20 21 22 23 Module 1 Module 2 PIN DESCRIPTION 1 NOT CONNECTED 4 SIGNAL 3 GND
RkJQdWJsaXNoZXIy NzYzOTY1