Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Configurator 1 Air distribution Solenoid valves manifold ISO 15407-2 1 | 384 Series 2700 SHORT CODE FUNCTION / CONNECTION : A= 5/2 SOLENOID - SPRING B= 5/2 SOLENOIS - DIFFERENTIAL C= 5/2 SOLENOID - SOLENOID E= 5/3 CC SOLENOID -SOLENOID F= 2x3/2 NC-NC (= 5/3 OC) SOLENOID -SOLENOID G= 2x3/2 NO-NO (= 5/3 PC) SOLENOID -SOLENOID H= 2x3/2 NC-NO SOLENOID -SOLENOID I= 2x3/2 NO-NC SOLENOID -SOLENOID T= FREE VALVE SPACE PLUG Manifold Layout configuration __ V27 . . __ ACCESSORIES X = Diaphragm plug on pipe 1 Y = Diaphragm plug on pipe 3 Z = Diaphragm plug on pipe 5 XY = Diaphragm plug on pipe 1 & 3 ZX = Diaphragm plug on pipe 5 & 1 ZY = Diaphragm plug on pipe 5 & 3 ZXY = Diaphragm plug on pipe 5, 1 & 3 LEFT ENDPLATE E2 = 25 poles 2,3 W E3 = 37 poles 2,3 W E4 = 25 poles 1W E5 = 37 poles 1W ACCESSORIES CONFIGURATION NOTE: While configuring the manifold always be careful that the maximum number of electrical signals available is: 32 when an input 37 poles endplate is used. 22 when an input 25 poles endplate is used. The use of monostable valve mounted on a base type 2 ( 2 electrical signals occupied ) causes the loss of one electric signal. In this case the monostable valve can be replaced by a bistable valve. The diaphragms plugs are used to intercept the conduits 1,3 & 5 of the base. If it is necessary to interrupt more than one conduit in the same time then put in line the letters which identifies the position (for exemple : regarding the 3 & 5 conduits, put the Y & Z letters). Should one or more conduits be cut more than one time it is necessary to add the relevant intermediate Supply/Exhaust module. __ MULTIPOINT CONNECTION MP = PNP 24 V DC MN = NPN 24 V DC RIGHT ENDPLATE U0 = Closed U2 = 25 Poles __ __ . __ . . . I/O MODULE M8 (Requires 25 poles right endplate) . . . . . . . SUB-BASE TYPE 1 = Base type 1 for Monostable (1 electrical signal occupied) 2 = Base type 2 for Bistable (2 electrical signals occupied) VALVE TYPE: A = Self-feeding E = External feeding __ __ MODUL CONFIGURATION Sub-base type Valve type __ __ __
RkJQdWJsaXNoZXIy NzYzOTY1