Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 Air distribution 1 | 400 Solenoid valves manifold Series 2300 - ENOVA® Series 2300 - ENOVA® General Technical innovation, rational design, high performance and extremely compact size: these are the main features the ENOVA® series bring to the market. Each valve comprises all the necessary pneumatic and electrical functions needed to produce a solenoid valve assembly. There are no limits to the configuration of the solenoid valve island, as full priority has been given to the end user’s needs; the addition or removal of modules is a simple operation that can be swiftly and easily achieved. The management of the electrical signals through the valves is optimized through a patented dedicated connector in each valve. Electrical connections are made via a twenty-five pin connector, which is capable of controlling up to twenty-two solenoids. Electrical and pneumatic connections are located on the same module at one end of the assembly. Serial bus nodes compatible with most common protocols are easily integrated. Most widely used and known communication protocols, such as PROFIBUS DP, CANopen®, DeviceNet, AS-Interface can be directly integrated with the valve manifold by simply plugging the necessary module onto the electrical connection, maintaining IP65 environmental protection. The management of inputs has also been foreseen, and can be achieved by adding one or more expansion modules directly to the serial module. “Shifting time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001, Pneumatic fluid power-Directional control valves-Measurement of shifting time” Main characteristics - Clean profile prevents accumulation of dirt - Compact size: modules of 12.5 mm - Connections available: 4 , 6 , 8 mm - IP65 protection grade - Optimized electrical connection system - Electrical and pneumatic line connections on one side - Quick coupling connection system with visual indicator: locked/unlocked - Freedom of configuration Functions - 5/2 monostable - 5/2 bistable - 5/3 closed centres - 2x3/2 NC/NC (5/3 open centres) - 2x3/2 NO/NO (5/3 pressured centres) - 2x3/2 NC/NO - 2x2/2 NC/NC - 2x2/2 NO/NO - 2x2/2 NC/NO Construction characteristics Central body Reinforced Technopolymer External casing Reinforced Technopolymer Operators Reinforced Technopolymer Spool seals PUR Spools Aluminium 2011 Springs Spring steel with protective coating Piston seals Oil resistant nitrile rubber - NBR Technical characteristics Voltage 24 VDC ± 10% PNP (NPN on request) Pilot consumption 0,9 Watt Valve working pressure (1-11) from vacuum to 10 bar max. Pilot working pressure (12-14) from 2,5 to 7 bar max. Operating temperature -5°C +50°C Protection degree IP65 Fluid Filtered air. No lubrication needed, if applied it shall be continuous Attention: dry air must be used for applications below 0°C"
RkJQdWJsaXNoZXIy NzYzOTY1