Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 Air distribution 1 | 413 Solenoid valves manifold Series 2300 - ENOVA® Manual over-ride function Bistable function Unstable function Push to actuate (when released it moves back to the original position) Push and turn to get the bistable function 1 2 NOTE: It is strongly suggested to replace the original position after using Manifold assembly 180° 180° 180° 180° The assembly procedure should start from the end-plate which should be positioned on a flat surface. Add the requested modules by simply rotating by 180° the fastening pins by means of a 1x5.5 flat screw driver. The last module to be assembles shall be the inlet module Fastening pins rotation direction: - To lock: rotate anticlockwise (in the direction of the LOCK print on the case) - To unlock: rotate clockwise (in the direction of the UNLOCK print on the case) The same procedure shall be used to add or remove any module.
RkJQdWJsaXNoZXIy NzYzOTY1