Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Solenoid valves manifold Series 2200 "OPTYMA-Sc" 1 Air distribution 1 | 448 Series 2200 "OPTYMA-Sc" General Optyma solenoid valves series it's completed by "Compact" version. It is useful in case a limited number of solenoid valves is needed without managing input and output signals. Standard base blocks provide 4 or 6 solenoid valves positions. Standard base blocks can be individually sold even without solenoid valves to allow maximum configuration flexibility. Solenoid valves can be chosen from whole Opytma-S range. Manifolds made in this way allow great room and weight saving against corrispondent pneumatic group from Optyma-S series. - Flow rate: up to 550[Nl/min], using the modular base with Ø8 quick fitting tube. - Modular base available with Ø4, Ø6, Ø8 quick fitting tube. - The solenoid pilots are low consumption and fitted on the same side of the valve. - Mono and bistable valves have the same dimension. - Easy and fast assembly on the sub base thanks to the “one screw” mounting solution. - Possibility to replace a valve without the need of disconnecting the pneumatic pipes. - Electrical and pneumatic connections positioned on the same side. - Possibility to operate with different pressures and vacuum. - 4 or 6 electric signals management (two signals per position, indipendently of the mounted solenoid valve). - The ectrical connection is achieved thanks to a 9 or 15 poles connector. - The protection grade is IP65 directly integrated in the manifold components. “Shifting time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001, Pneumatic fluid power-Directional control valves-Measurement of shifting time” Main characteristics One size: 12.5mm thick Monostable and bistable valves with same dimensions Modular subbase with two positions Quick coupling connections directly integrated in sub base Integrated and optimized electrical connection system. IP65 protection grade as standard Construction characteristics Body Technopolymer Spacer Technopolymer Spacers NBR Piston seals NBR Springs AISI 303 stainless steel Operators Technopolymer Pistons Technopolymer Spools AISI 303 stainless steel Functions SV 5/2 MONOSTABLE SOLENOID-SPRING SV 5/2 MONOSTABLE SOLENOID-DIFFERENTIAL SV 5/2 BISTABLE SOLENOID-SOLENOID SV 5/3 C.C. SOLENOID-SOLENOID SV 2x3/2 N.C.-N.C. (=5/3 O.C.) SOLENOID-SOLENOID SV 2x3/2 N.O.-N.O. (=5/3 P.C.) SOLENOID-SOLENOID SV 2x3/2 N.C.-N.O. SOLENOID-SOLENOID SV 2x3/2 N.O.-N.C. SOLENOID-SOLENOID Technical characteristics Voltage 24VDC ±10% PNP (NPN and AC on request) Pilot consumption 0,5 Watt Pilot working pressure (12-14) from 2,5 to 7 bar max. Valve working pressure [1] from vacuum to 10 bar max. Operating temperature from -5°C to +50°C Protection degree IP40 Life (standard operating conditions) 50000000 Fluid Filtered air. No lubrication needed, if applied it shall be continuous
RkJQdWJsaXNoZXIy NzYzOTY1