Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Solenoid valves manifold Series 2500 "OPTYMA-T" 1 Air distribution 1 | 486 Series 2500 "OPTYMA-T" General With the introduction of the “T” configuration of solenoid valves with integrated pneumatic connections fitted directly on the sub base the 2500 series (called OPTYMA) is now richer than ever. Many technical features make the new product interesting: - Flow rate of 800 Nl/min - Tie rod system to hold the sub bases together - All pneumatic connections (push-in) on the same side of the manifold - Quick mounting of the valve to the base using just one screw - Possibility to replace the valve without the need to disconnect the connections - Possibility to use different pressures along the manifold (including vacuum) - IP65 environmental protection - Electrical connection directly integrated into the base, 32 electrical signals available (can be used to build up a manifold of 32 monostable valves, 16 bistable valves or any combination within that limit). - The electrical connection is made via 37 pin D-SUB connector. - It is also available a 25-pole connector that is able to manage a maximum number of 22 electrical signals. Possibility to integrate with Field bus modules CAnopen®, PROFIBUS DP, DeviceNet, EtherNet/IP, PROFINET IO RT/IRT and EtherCAT®. Possibility to connect input modules, even on the base that does not have the Field Bus module. Large use of technopolymer material reduces the overall weight of the manifold. "Shifting t ime o f p neumatic d irectional c ontrol v alves o r mo ving pa rts, l ogic d evices w ere me asured i n a ccordance t o I SO 1 2238:2001, P neumatic f luid p ower-Directional control valves-Measurement o f s hifting t ime" Main characteristics Integrated and optimized electrical connection system. IP65 protection degree. Only one 19mm size Electrical line connections on one side Monostable and bistable solenoid valves with the same size dimensions. Easy and fast manifold assembly - tie rod system to hold the sub bases together Quick coupling connections directly integrated in sub base Easy and fast manifold assembling. Construction characteristics Body Technopolymer Operators Technopolymer Spacers NBR Spacer Technopolymer Spools Nickel - plated steel / Technopolymer Springs AISI 302 stainless steel Pistons Technopolymer Piston seals NBR Functions SV 5/2 MONOSTABLE SOLENOID-SPRING SV 5/2 MONOSTABLE SOLENOID-DIFFERENTIAL SV 5/2 BISTABLE SOLENOID-SOLENOID SV 5/3 C.C. SOLENOID-SOLENOID SV 2x3/2 N.C.-N.C. (=5/3 O.C.) SOLENOID-SOLENOID SV 2x3/2 N.O.-N.O. (=5/3 P.C.) SOLENOID-SOLENOID SV 2x3/2 N.C.-N.O. SOLENOID-SOLENOID Technical characteristics Voltage 24VDC ±10% PNP (NPN and AC on request) Pilot consumption 1,3 Watt Pilot working pressure (12-14) From 3 to 7 bar max. Valve working pressure [1] from vacuum up to 10 bar Operating temperature -5°C +50°C Protection degree IP65 Life (standard operating conditions) 50000000 Fluid Filtered air. No lubrication needed, if applied it shall be continuous
RkJQdWJsaXNoZXIy NzYzOTY1