Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Multipolar connections 1 Air distribution Solenoid valves manifold 1 | 501 Series 2500 "OPTYMA-T" 1 4 3 1 2 3 4 ... 21 22 23 24 8 9 10 11 12 13 1415 ... 1 2 3 4 25 26 27 28 8 9 10 11 12 13 1415 Modulo 1 16 17 18 19 20 21 22 23 Modulo 2 PIN DESCRIPTION 1 NOT CONNECTED 4 SIGNAL 3 GND With this kind of control the I/O module can only be used as an output. Pin 1 of each connector is not connected. The output voltage will be 0.7V lower than that applied to Pin 4 of the connector. The maximum output current for each output is 100mA. The correspondence between control byte and each single output depends on how many electrical signals are used by the manifold and by the relative position of the I/O module. B) Control via fieldbus: Please note: I/O modules don’t allow to connect any additional valves manifold after them. Serial node Outlet Pin Serial node Outlet Pin Multi-pole connector pin Please note: Optyma 32-T solenoid valve manifolds manage up to 32 signals. If the manifold uses more than 24 signals the I/O module will manage only the remainder. Connections that are not managing useful signals will remain unconnected. Multi-pole connector pin Attention: No more additions are possible Attention: Output only Attention: Output only Attention: Only one more I/O module can be added. Input Module 37 poles Connettor 37 poles Connettor Serial node Outlet Pin 8 9 1011 12 13 1415 1 2-3 4-5 6 7 Module 1 16 17 18 19 20 21 22 23 Module 2 1 2 3 4 ... 21 22 23 24 29 30 31 32 Not connected Attention: Signal Not connected GND Connected Through line Connected Serial node Outlet Pin Attention: Output only Attention: Signal Not connected GND Connected Not connected 1 2-3 4-5 6 7 Attention: No more additions are possible Attention: Output only 8 9 10 11 12 13 1415 1 2-3 4-5 6 7 Module 1 29 30 31 32
RkJQdWJsaXNoZXIy NzYzOTY1