Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Modular FRL 2 | 165 Series 1700 Steel line - Size 3 2 Air Service Units Construction characteristics Technical characteristics - Body, adjust. mechanism, AISI 316L stainless steel and caseback inter. components - AISI 316 stainless steel adjustment springs. - Fixing screws, adjustment screws and locknut in A4 (AISI 316) stainless steel. - Pressure regulator diaphragm with over-pressure drain (Relieving). - Low hysteresis rolling diaphragm. - Balanced system. Maximum inlet pressure (standard version) Temperature (standard version) Temperature (low temperature version) Temperature (low temperature version -60°C) Temperature (high temperature version) Temperature (EPDM-FDA version) Pressure gauge connections Weight 20 bar -30 °C +80 °C -50 °C +80 °C -60 °C +80 °C -5 °C +150 °C -40 °C +100 °C 1/8” NPT 1830 (gr.) The pressure must be always regulating while increasing. For a more precise regulation and higher sensibility, the use of a regulator with a pressure range as close as possible to the regulated pressure is recommended. Note Assembly position Indifferent Flow rate chart Pressure regulator Stainless steel line have been designed to withstand a 60 Bar maximum inlet pressure. Maximum regulated outlet pressure is 20 Bar. For performance details please refer to diagram alongside. 35 19 71 71 Ch. 17 Ch. 17 22 5.41 5.67 5.82 5.271 G1/2” 1/4” - 1/2” NPT Connections IN/OUT M6 N°2 Front holes N°2 Rear holes 1/8” NPT 1/8” NPT Connection relieving Pressure gauge connection 0 1 2 3 4 5 6 7 0 Downstream pressure (bar) Flow rate [dm³/min] (ANR) Inlet pressure 10 bar - Reg. 0-12 bar 1000 2000 3000 4000 5000 1/2” NPT - G1/2" 1/4” NPT - G1/4" 20 30 40 50 60 012345678910111213 Max. regulated pressure (bar) Inlet pressure (bar) Reg. 0-2 bar Reg. 0-4 bar Reg. 0-8 bar Reg. 0-12 bar Ordering code SV173CRG T O V VERSION S = Standard surface finishing F = Clean profile C CONNECTIONS A = 1/4” NPT B = 1/2” NPT D = G1/2” G PRESSURE RANGE A = 0-2 bar B = 0-4 bar C = 0-8 bar D = 0-12 bar T TYPE = Standard* N = Without relieving O OPTIONS = Standard* L= Low temperature Z = Low temperature (-60 °C) H= High temperature EF= EPDM-FDA * no additional letter required Regulators
RkJQdWJsaXNoZXIy NzYzOTY1