Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Pressure booster 2 | 216 Series P+ 2 Air Service Units ►Pressure booster in Technopolymer Ø40 Ordering code * See Tranport and Installation MANOMETER OPTIONS Without options = Standard without manometer A = Manometer P1 0-12 bar Manometer P2 0-20 bar B = Manometer P1 0-12 bar Manometer P2 0-16 bar C = Manometer P1 0-12 bar Manometer P2 0-12 bar 47.5 80 160 127.5 65 23.5 G1/4" - Connections IN/OUT/EXH IN OUT EXH 20 20 40 M4 N°4 holes* 23 47.5 G1/8" Manometer connection Inlet pressure 47.5 G1/8" Manometer connection Outlet pressure P1 P2 Operational characteristics Technical characteristics 0 2 4 6 8 10 12 14 16 18 20 Flow rate characteristics Outlet flow rate (NL/min) Boosted pressure P2 (bar) P1=P2 0 100 150 200 250 300 350 400 450 500 Characteristics curves 5 10 15 20 25 30 Filling characteristics (5 liters tank) Filling time (s) Ratio K P2/P1 0,4 0,2 0,6 0,8 1 1,2 1,4 1,6 1,8 2 0 P1 = Inlet pressure P2 = Tank pressure - Pressure Booster with max. 2:1 Compression ratio - Automatic operation for use with compressed air only - Maintains downstream air when the supply pressure fails (Providing the circuit has no leakage) - Integrated regulator for output pressure control, with overpressure relief valve - IN,OUT and EXH connections – G1/4” on the same side - Manometer connections G1/8” to monitor and control the input and output pressures - Body and cover in technopolymer - Connections in technopolymer Working pressure ( bar ) [ Min. - Max. ] -5 ÷ + 50 Moltiplication ratio max. 2 : 1 Pressure regulation Any 2,5 ÷ 10 Connections ( IN / OUT / EXT ) Manometer connections P1/P2 G1/4" G1/8" Assembly position Manual with relieving Weight 905 gr. Working temperature ( °C ) [ Min. - Max. ] Max. fittings torque G1/8 = 4 N/m G1/4 = 9 N/m
RkJQdWJsaXNoZXIy NzYzOTY1