Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice ISO 6432 Microbore cylinders Series 1200 Rolled end covers MIR-INOX 3 Pneumatic actuation 3 | 13 Series 1200 Rolled end covers MIR-INOX Construction characteristics Barrel stainless steel AISI 304 Fixing devices stainless steel AISI 304 Forks stainless steel AISI 304 Piston seals standard: NBR Oil resistant rubber, PUR Piston rod seals (FPM seals available upon request) Pistons aluminium Piston rod stainless steel End caps stainless steel AISI 316 Operational characteristics Fluid filtered air, preferably lubricated Max. working pressure 10 bar Working temperature -5°C ... +70°C with standard seals magnetic or non magnetic piston -5°C ... +80°C with FPM seals magnetic piston -5°C ... +150°C with FPM seals non magnetic piston Please follow the suggestions below to ensure a long life for these cylinders: • use clean and lubricated air. • correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. • avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device). • evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.). Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Standard strokes Double acting version Ø16: 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 mm Ø20 - Ø25: 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 - 320 - 350 - 400 mm Ø32: 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 - 320 - 350 - 400 - 450 - 500 mm On request are available strokes up to: Ø16: 700 mm Ø20 - Ø32: 1000 mm
RkJQdWJsaXNoZXIy NzYzOTY1