Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Microbore cylinders according to standard ISO 6432 3 | 1 Series 1200 Threaded end caps cylinders 3 Pneumatic actuation Technical characteristics Fluid Max. pressure Working temperature Filtered air. No lubrication needed, if applied it shall be continuous. 10 bar -5°C - +70°C with standard seals magnetic or non magnetic piston -5°C - +80°C with FPM seals magnetic piston -5°C - +80°C with HNBR seals magnetic piston -5°C - +120°C with HNBR seals non magnetic piston -5°C - +150°C with FPM seals non magnetic piston Construction characteristics End caps Barrel Piston rod Seals Mounting Forks Single-acting springs hard anodised aluminum anodised aluminium (brass for Ø8 and Ø10) Standard: NBR Oil resistant rubber, PUR Piston rod seals (HNBR or FPM seals available upon request) steel painted in cataphoresis cadmium plated steel steel for springs and stainless steel Piston non magnetic piston : Ø8 - Ø10: stainless steel / Ø12 - Ø50: C43 chromed magnetic piston: Ø10 - 20: stainless steel / Ø25 - 50: C43 chromed Cushioning length ø 16 - 20 - 25 - 32 - 40 - 50 mm 15 - 18 - 18 - 18 - 22 - 22 aluminium Series 1200, Threaded end caps Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Standard strokes Ø8 - Ø10 : 15 - 25 - 50 - 75 - 80 - 100 mm Ø12 - Ø16 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 mm Ø20 - Ø25 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 - 320 - 350 - 400 mm Ø32 - Ø50 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 - 320 - 350 - 400 - 450 - 500 mm On request are available strokes up to: Ø8 - Ø10 : 250 mm Ø12 - Ø16 : 700 mm Ø20 - Ø50 : 1000 mm Minimum and maximum springs load for single acting version Bore Min. load (N) Max. load (N) Ø12 - Ø20 10 25 Ø25 10 50 Ø32 20 55 Ø40 - Ø50 40 110 Double acting version Single acting version Ø12 - Ø50 : up to stroke 40 mm On request are available strokes up to 200 mm
RkJQdWJsaXNoZXIy NzYzOTY1