Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Microbore cylinders according to standard ISO 6432 3 | 2 Series 1200 Threaded end caps cylinders Pneumatic actuation 3 Standard execution, fully complying with ISO standards from ø 8 to ø 25. BOREs 32, 40 and 50 not included in the standard, comply with our own specifications. Can use all available mountings. For single acting type, the maximum stroke is 40 mm., after which overall dimensions increase in length to an extent not proportional to the stroke (and in any case not longer than stroke 100). Ordering code 1260.Ø.stroke 1271.Ø.stroke 1272.Ø.stroke 12– –.Ø.stroke.A 12– –.Ø.stroke.M 12– –.Ø.stroke.X 12– –.Ø.stroke.M.A 12– –.Ø.stroke.M.A.X 12– –.Ø.stroke. . . .T 12– –.Ø.stroke. . . .V Basic version Basic version front spring from Ø12 (max stroke 40 mm) Basic version rear spring from Ø12 (max stroke 40 mm) Adjustable cushioning (from Ø16) Magnetic piston (from Ø10) Stainless steel rod Cushioning with magnetic piston Cushioning, magnetic piston and stainless steel piston rod HNBR seals version FPM seals version Description EW D EE Y L3 AM WF L5+stroke XC+stroke L1+stroke L4 L4 L L2 MR CD BE KV KX KK MM BE KY L10+stroke kw ►Basic version Version derived from standard execution 1260 and not included in ISO standard. Not having a rear eye it is shorter and the air inlet is from the rear or at 90° like it is on the front. The considerations made for the basic type 1260 apply for all single-acting types. Execution by rod coming out from both end caps, with overall dimensions. except for the rod, equal to 1260 version. Not available with Ø8 and 10. Ordering code 1262.Ø.stroke 1262.Ø.stroke.A 1262.Ø.stroke.M 1262.Ø.stroke.X 1262.Ø.stroke.E 1262.Ø.stroke.M.A 1262.Ø.stroke.M.A.X 1262.Ø.stroke. . . .T 1262.Ø.stroke. . . .V Through rod cylinder rod Adjustable cushioning (from Ø16) Magnetic piston (from Ø10) Stainless steel rod Hexagonal piston rod (from Ø12) Cushioning with magnetic piston Cushioning, magnetic piston and stainless steel piston rod HNBR* seals version FPM* seals version Description *Excludes hexagonal rod version D KX KY KW L3 AM WF L4 L4 WF+stroke Y L10+stroke L5+stroke L9+2 stroke EE KV BE MM KK Ordering code 1261.Ø.stroke 1273.Ø.stroke 1274.Ø.stroke 12– –.Ø.stroke.A 12– –.Ø.stroke.M 12– –.Ø.stroke.X 12– –.Ø.stroke.M.A 12– –.Ø.stroke.M.A.X 12– –.Ø.stroke. . . .T 12– –.Ø.stroke. . . .V 12– –.Ø.stroke. . . .L Without rear eye Without rear eye front spring from Ø12 (max stroke 40 mm) Without rear eye rear spring from Ø12 (max stroke 40 mm) Adjustable cushioning (from Ø16) Magnetic piston (from Ø10) Stainless steel rod Cushioning with magnetic piston Cushioning, magnetic piston and stainless steel piston rod HNBR seals version FPM seals Air inlet at 90° version Description D EE Y KW KV KY KX WF AM L6+stroke L4 L7 EE L8+stroke L3 L4 KK MM BE L11 EE ►Without rear eye version ►Through rod cylinder version
RkJQdWJsaXNoZXIy NzYzOTY1