Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Microbore cylinders according to standard ISO 6432 3 | 10 Series 1200 TECNO-MIR Pneumatic actuation 3 Series 1200, TECNO-MIR Construction characteristic Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Fluid Maximum working pressure Working temperature Filtered air. No lubrication needed, if applied it shall be continuous. 8 bar -5°C - +50°C End caps Barrel Piston rod Piston Seal Piston rod seal Mounting Forks nylon 66 reinforced with glass fibres nylon 66 reinforced with glass fibres C43 Chromed (non magnetic piston version) stainless steel (magnetic piston version) aluminium NBR oil-resistant rubber seal PUR steel painted / stainless steel AISI 304 zinc plated steel / stainless steel AISI 304 Operational characteristics Ø12 Ø16 Ø20 Ø25 Thread 1 1 4 4 Bore M5 M5 G 1/8” G 1/8” Maximum torque (Nm) Maximum tightening torque for fittings Standard strokes Ø12 Ø16 Ø20 Ø25 stroke 0 60 gr. 75 gr. 180 gr. 200 gr. every 10mm 7 gr. 8,5 gr. 10 gr. 20 gr. WEIGHT TABLE SERIES TECNO MIR 1232 WEIGHT g Ø12 Ø16 Ø20 Ø25 storke 0 50 gr. 65 gr. 120 gr. 160 gr. every 10mm 3,75 gr. 4 gr. 6,5 gr. 9 gr. WEIGHT TABLE SERIES TECNO MIR 1230 - 1231 WEIGHT g Bore Bore Ø12 : 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 mm Ø16 : 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 - 250 mm Ø20 - Ø25 : 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 - 250 - 300 mm On request are available strokes up to: Ø12 : 200 mm Ø16 : 250 mm Ø20 - Ø25: 300 mm Double acting version
RkJQdWJsaXNoZXIy NzYzOTY1