Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Microbore cylinders according to standard ISO 6432 3 | 27 Series 1200 - Fixing device 3 Pneumatic actuation Ordering code Ordering code ►Rear eye ►Cylinder rod forks 1200.Ø.03 ( 1 piece ) C9+stroke C4 C6 EW FB C8 C4 C7 C2 C1 CD C3 C5 Use with the rear end cover to mount the cylinder either parallel or at a right-angle to the mounting plane. This allows the cylinder to oscillate and self-align with the linked element to the rod. This is necessary when the rod may be subject to lateral during travel. Attention: the dimensions of microbore cylinders with threaded end covers (*) increase by 10mm for equipped with magnetic piston and spring return, and by 9mm for microbore cylinders with 10mm BORE magnetic piston. * Bore CD C1 C2 (±0,3) C3 C4 C5 C6 C7 C8 C9 (±0,4) EW FB (H13) Weight g. 10 4 28,5 24 3,5 12,5 20 4,5 2,5 13 63 8,1 4,5 20 12 6 33,5 27 5 15 25 6,5 3 18 73,5 12,1 5,5 35 16 6 33,5 27 5 15 25 6,5 3 18 80,5 12,1 5,5 35 20 8 39,5 30 6 20 32 9,5 4 24 91,5 16,1 6,5 75 8 4 28,5 24 3,5 12,5 20 4,5 2,5 13 63 8,1 4,5 20 25 8 39,5 30 6 20 32 9,5 4 24 100,5 16,1 6,5 75 32 12 44,5 33 7 24 38 11,5 4 34 100,5 26,1 6,5 135 40 14 53,5 40 10 28 45 13,5 4 38 119,5 30,1 8,5 180 50 14 53,5 40 10 28 45 13,5 4 38 122,5 30,1 8,5 180 Available from bore Ø12 1200.Ø.04 (with pin) 1200.Ø.04/1 (with pin) * * KW BE KV KW BE GF Bore 8 10 12 16 20 25 32 40 50 7 7 16 16 25 25 42 60 60 12 12 20 20 45 90 90 145 145 Forks weight g. Nuts weight g. D3 D4 H5 H1 H4 H6 H7 (B12) H8 H9 KK BE KV GF KW H2 H3 4 4 6 6 8 10 10 12 12 21 21 31 31 42 52 52 62 62 8 8 12 12 16 20 20 24 24 17 17 22 22 30 30 - - - - - - - - - 42 52 52 5,5 5,5 6 6 7 7 8 9 9 13 13 19 19 26 32 32 38 38 8 8 12 12 16 20 20 24 24 8 8 10 10 14 18 18 20 20 5 5 7 7 10 12 12 14 14 8 8 12 12 16 20 20 24 24 4 4 6 6 8 10 10 12 12 10 10 12 12 16 20 20 24 24 11 11 18 18 23 27 27 32 32 M4x0,7 M4x0,7 M6x1 M6x1 M8x1,25 M10x1,25 M10x1,25 M12x1,75 M12x1,75 M12x1,25 M12x1,25 M16x1,5 M16x1,5 M22x1,5 M22x1,5 M30x1,5 M40x1,5 M40x1,5 1200.Ø.05 Ordering code H2 H8 H6 H7 KK D4 H1 H3 H4 H5 D3 H2 H8 H9 H6 H7 KK H4 H5 D3 H3 H1 D4 ►Nut or lock nut for the endcaps Forks: Similar to hinge 03, mounted on the rod thread, assures a regular operation even in the presence of significant forces to the linked element. Made of zinc plated steel. Nut: Used to fasten flanges or feet to the endcaps of the microcylinder. The nuts are mounted on BORE that go from 8 to 25, the lock nuts on 32, 40 and 50. Both are supplied (one piece) with the microbore cylinders.
RkJQdWJsaXNoZXIy NzYzOTY1