Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Cylinders according to standard ISO 15552 Series 1315, Round tube cylinders 3 Pneumatic actuation 3 | 73 Series 1315, Round tube cylinders These cylinders are built according to ISO 15552. Construction characteristicsC cushion bushings aluminium Piston rod bushings sintered bronze Barrel oxidised aluminium Seals standard: NBR Oil resistant rubber, PUR Piston rod seals Pistons aluminium Piston rod C43 chromed steel End caps aluminium alloy casting Tie rods steel with rolled threads Operational characteristics Fluid filtered and lubricated air - hydraulic oil (with special bushing) Pressure max. 10 bar Working temperature -5 °C ... +70 °C Cushioning lenght 50 mm Please follow the suggestions below to ensure a long life for these cylinders: • use clean and lubricated air. • correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. • avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device). • evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.). Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. On request are available strokes up to: 2800 mm
RkJQdWJsaXNoZXIy NzYzOTY1