Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Cylinders according to standard ISO 15552 3 | 64 Series 1300 - Fixing device Pneumatic actuation 3 TD UW XV (max)+stroke XV (min) S TL TM A TL S TD UW TL TM A TL XV (max)+stroke XV (min) Steel: 1320.Ø.12F Intermediate trunnion Series 1386 - 1388 - 1396 - 1398 Clevis to be mounted on the barrel to have the centre of rotation of the hinge pin at a point between the end caps of the cylinder. It is attached to the barrel by means of eight pointed grains. In the case of anchorage subject to heavy use, it is recommended to connect the clevis once the right position has been found. Attention: mounting of the clevis with contact to the end plates does not allow the use of the magnetic sensors as the switch limits. Clevis to be mounted on the barrel to have the centre of rotation of the hinge pin at a point between the end caps of the cylinder. It is attached to the barrel by means of eight pointed grains that block in the "V" groove of the four protruding shapes. In the case of anchorage subject to heavy use, it is recommended to connect the clevis once the right position has been found. Attention: mounting of the clevis with contact to the end plates does not allow the use of the magnetic sensors as the switch limits. Bore A S TD (e9) TL (h14) TM (h14) UW XV (max.) XV (min.) Weight g 160 190 40 32 32 200 190 193 150 3580 32 49 18 12 12 50 59 85 61 180 40 62 21 16 16 63 62 96 69 270 50 73 21 16 16 75 73 102 78 330 63 87 27 20 20 90 87 109 86 650 80 109 27 20 20 110 109 123.5 96.5 890 100 130 32 25 25 132 130 131.5 108.5 1550 125 155 32 25 25 160 155 162 128 1950 200 240 40 32 32 250 240 204 168 5850 32 49.8 18 12 12 50 70 80 66 195 40 62.6 21 16 16 63 78 91.5 73.5 350 50 74.1 21 16 16 75 91 97.5 82.5 430 63 89.1 27 20 20 90 94 106.5 88.5 565 80 109.1 27 20 20 110 130 118.5 101.5 1035 100 130.1 30 25 25 132 145 127 113 1450 Bore A S TD (e 9) TL (h 14) TM (h 14) UW XV (max.) XV (min.) Weight g Ordering code ►Intermediate trunnion Series 1319 - 1321 Ordering code Steel: 1386.Ø.12F ►
RkJQdWJsaXNoZXIy NzYzOTY1