Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Cylinders according to standard ISO 15552 3 | 65 Series 1300 - Fixing device 3 Pneumatic actuation TK TL TM TL ØTD XV (max) + stroke XV (min) UW TK UW ØTD TL TM TL XV (max) + stroke XV (min) Aluminium Intermediate Trunnion with steel bushes to be mounted on the barrel. This solution allows the cylinder to rotate around the hinge which can be mounted in any position between the end caps. It is attached to the barrel by means of 8 grub screws which secure the Trunnion to the extruded barrel. In the case of heavy duty applications it is recommended that the Trunnion is secured using expansion pins. In case off applications with high speed, high load and high pressure please contact our technical office. Please note: If the Trunnion is mounted in direct contact with the cylinder end cap, it will not be possible to fit magnetic sensors at the end of stroke 1500._, RS._, HS._ series. Aluminium Intermediate Trunnion with steel bushes to be mounted on the barrel. This solution allows the cylinder to rotate around the hinge which can be mounted in any position between the end caps. It is attached to the barrel by means of 8 grub screws which secure the Trunnion to the extruded barrel. In the case of heavy duty applications it is recommended that the Trunnion is secured using expansion pins. In case off applications with high speed, high load and high pressure please contact our technical office. Please note: If the Trunnion is mounted in direct contact with the cylinder end cap, it will not be possible to fit magnetic sensors at the end of stroke. Bore TD TL TM TK UW XV min. XV max. Weight g 32 Ø12 12 50 18 54 61 85 70 40 Ø16 16 63 21 60 69 96 110 50 Ø16 16 75 21 72 78 102 140 63 Ø20 20 90 27 87 86 109 280 80 Ø20 20 110 27 109 96.5 123.5 370 100 Ø25 25 132 32 130 108.5 131.5 630 Bore TD TL TM TK UW XV min. XV max. Weight g 32 Ø12 12 53* 18 56 65 81 60 40 Ø16 16 63 21 64 74 91 100 50 Ø16 16 75 21 76 80 100 125 63 Ø20 20 90 27 92 87 108 240 80 Ø20 20 110 27 112 99 121 320 100 Ø25 25 132 32 134 109 130.5 540 * (Ø32, TM: not according to standard ISO 15552 Ordering code Ordering code ►Intermediate trunnion Series 1319 - 1321 ►Intermediate trunnion Series 1390 - 1392 1320.Ø.12BF (Aluminium with steel bushes) 1390.Ø.12F (Aluminium with steel bushes)
RkJQdWJsaXNoZXIy NzYzOTY1