Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Cylinders according to standard ISO 15552 3 | 68 Series 1315 - Round tube cylinders Pneumatic actuation 3 Series 1315, Round tube with tie rod cylinders - Ø250 / Ø320 General Tie rod cylinders, according to standard ISO15552. End caps Construction characteristics Operational characteristics aluminium alloy casting Fluid Pressure Operating temperature filtered and lubricated air - hydraulic oil (with special bushing) max. 10 bar -5 °C - +70 °C Please follow the suggestions below to ensure a long life for these cylinders: • use clean and lubricated air • correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. • avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device); • evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Barrel Tie rod Cushion bushings Piston oxidised aluminium steel with rolled threads aluminium aluminium Rod C43 chromed steel Rod-guide bushing sintered bronze Seals Standard: NBR oil resistant rubber, PUR piston rod seals Cushioning length 50 mm
RkJQdWJsaXNoZXIy NzYzOTY1